====================================================================
Copyright (c) 2017-2021 ADVANCED MICRO DEVICES, INC. All Rights Reserved.
====================================================================
AMD Sensor Fusion Hub
---------------------
AMD Sensor Fusion Hub (will be referred as SFH device) is a PCI Express Endpoint and Sensor UMDF driver.
++++++++++++++++++++++++++
Important notes
++++++++++++++++++++++++++
1) The driver (version 216) is not compatible with firmware’s prior to 1.0.23 firmware. Please UPDATE firmware/BIOS before using AMD SFH drivers 216 and above driver.
2) New dynamic discovery functionality has been added to the AMD SFH driver version 216 and above, so this functionality is not compatible/available with the older AMD SFH driver. If the different combination of driver’s version is used (example older KMDF driver and new UMDF driver and) or Rollbacking the KMDF or UMDF drivers may cause system BSOD. So please use the same version of the UMDF and KMDF drivers or there is need for the Rollback, please uninstall the both the drivers, and install the required drivers.

Revision History
----------------
1.0.0.315 17/FEB/2021
	Change Log -> Increase the S0 idle timeout value for kmdf device to go into idle state (200 to 600 ms).
	Change Log -> Introduced time interval 100 MS for Accel sensor to retrieve data.
	Change Log -> Enabled the sensor list in S0i3.
	Change Log -> Introduced a process sharing disable flag in umdf driver inf file to disable the process sharing. 

1.0.0.314 15/JAN/2021
	Change Log -> Updated the copyrights date and revision history
	Change Log -> Check Light Level using Target Lux instead of sensor output
	Change Log -> Increase timeout value and disable the process sharing
	Change Log -> Dump ALS Gain in WPP trace
	Change Log -> Update ALS Lux range from 100 to 2000 Lux

1.0.0.313 11/NOV/2020
	Change Log -> Read HOD Output from C2P Reg 5
	Change Log -> Add support for Stability Classifier
	Change Log -> Added ALS sensor support to amdsfhUI App
	Change Log -> Added ALS Calibration support to amdSfhApp

1.0.0.310 28/SEP/2020
	Change Log -> Updated ALS Calibration and AmdSfhUI App.

1.0.0.308 29/JUN/2020
	Change Log -> Fix Division by Zero in Fusion Sensor TimerExpire.

1.0.0.305 05/MAY/2020
	Change Log -> Clear P2C Reg Status bit before clearing P2C Reg0.

1.0.0.303 20/MAR/2020
	Change Log -> WA for forced shutdown in Tablet Mode.

1.0.0.297 23/DEC/2019
	Change Log -> Restore DCD on D0Entry.