Microsoft.Management.Configuration.Processor

Directives.

Constants related to PowerShell.

PSDesiredStateConfiguration v2.

Initializes a new instance of the class.

Interface for defining a PSDesiredStateConfiguration module.

Gets the module specification.

Gets the name of the Get-DscResource Cmdlet.

Gets the name of the Invoke-DscResource Cmdlet.

Gets all DSC resource.

PowerShell. A list with the DSC resource.

Gets all resources in a module.

PowerShell. Module specification. List of resources of that module and version.

Gets a DSC Resource.

PowerShell. Name. Module specification. DSC Resource from that module and version.

Calls Invoke-DscResource -Method Get from this module.

PowerShell. Settings. Name. Module specification. Properties of resource.

Calls Invoke-DscResource -Method Test from this module.

PowerShell. Settings. Name. Module specification. Is in desired state.

Calls Invoke-DscResource -Method Set from this module.

PowerShell. Settings. Name. Module specification. If a reboot is required.

Contains a DSC resource information. This object should be initialized with a Microsoft.PowerShell.DesiredStateConfiguration.DscResourceInfo. That object is the result of Get-DscResource and is not the same as System.Management.Automation.DscResourceInfo. The type is defined in a psd1 in the PSDesiredStateConfiguration. This file is based on that. If Invoke-DscResource gets support for passing the DscResourceInfo, we could keep the original object as member to then pass it in code.

Initializes a new instance of the class.

Dynamic object. Expected DscResourceInfo.

Initializes a new instance of the class. Used for unit tests.

Resource name. Module name. Version.

Gets or sets resource type name.

Gets or sets Name of the resource. This name is used to access the resource.

Gets the normalized resource name.

Gets or sets friendly name defined for the resource.

Gets or sets module which implements the resource. This could point to parent module, if the DSC resource is implemented. by one of nested modules.

Gets or sets name of the module which implements the resource.

Gets the normalized module name.

Gets or sets version of the module which implements the resource.

Gets or sets of the file which implements the resource. For the resources which are defined using MOF file, this will be path to a module which resides in the same folder where schema.mof file is present. For composite resources, this will be the module which implements the resource.

Gets or sets parent folder, where the resource is defined It is the folder containing either the implementing module(=Path) or folder containing ".schema.mof". For native providers, Path will be null and only ParentPath will be present.

Gets or sets a value which indicate how DSC resource is implemented.

Gets or sets company which owns this resource.

Gets properties of the resource.

Updates properties of the resource.

Updated properties.

Contains a DSC resource property information.

Initializes a new instance of the class.

Dynamic DSC property info.

Gets or sets name of the property.

Gets or sets type of the property.

Gets or sets a value indicating whether the property is mandatory or not.

Gets Values for a resource property.

Enumerated values for DSC resource implementation type.

DSC resource implementation type not known.

DSC resource is implemented using PowerShell module.

DSC resource is implemented using a CIM provider.

DSC resource is a composite and implemented using configuration keyword.

This should match the ones in AppInstallerErrors.h.

Corresponds to E_UNEXPECTED; this code path was reached without the developer realizing it was possible.

The module of the unit was installed, but the unit was not found.

The unit couldn't be found in the repository.

Multiple units found with the same criteria.

Unit error calling Invoke-DscResource Get.

Unit error calling Invoke-DscResource Test.

Unit error calling Invoke-DscResource Set.

Internal error calling Get-DscResource. More than one module found with the same version.

The module where the DSC resource is implemented cannot be imported.

The unit returned an invalid result.

The unit contains a setting that requires config root.

The module where the DSC resource is implemented requires admin.

The property type of a unit is not supported.

Resource not found by Find-DscResource.

Initializes a new instance of the class.

Resource name. Optional module.

Gets the resource name.

Gets the module, if any.

A call to Get-DscResource failed because at least two modules with the same version where found in the module path. If you are getting this verify the module path.

Initializes a new instance of the class.

Resource name. Optional module. The original runtime exception thrown.

Gets the resource name.

Gets the module, if any.

A call to Get-DscResource return multiple results for a specific resource.

Initializes a new instance of the class.

Resource name. Optional module.

Gets the resource name.

Gets the module, if any.

An interface that enables an exception to expose information appropriate for a unit result.

Gets a value indicating the source of the result.

Gets the description of the result.

Gets the details for the result.

Import-Module threw an exception.

Initializes a new instance of the class.

Module name. Inner exception.

Gets the module name.

Installing a DSC resource failed unexpectedly.

Initializes a new instance of the class.

Resource name. Module.

Gets the resource name.

Gets the module, if any.

A call to Invoke-DscResource failed unexpectedly.

The string for the Get method.

The string for the Set method.

The string for the Test method.

Initializes a new instance of the class. Use this constructor when no error is generated by the invoke and the result is not a valid value.

Method. Resource name. Optional module.

Initializes a new instance of the class. Use this constructor when the invoke fails with an error message.

Method. Resource name. Optional module. Message. If true, the source of this error is set to be the configuration.

Initializes a new instance of the class. Use this constructor when the invoke fails with an exception.

Method. Resource name. Optional module. The invoke exception.

Gets the invoke method.

Gets the resource name.

Gets the module, if any.

Gets a value indicating the source of the result.

Gets the description of the result.

Gets the details for the result.

Gets the HRESULT value for the given method.

The method. The HRESULT for the method.

The property type of a unit is not supported.

Initializes a new instance of the class.

Name. Type. Inner exception.

Initializes a new instance of the class.

Type.

Gets the name.

Gets the type.

A setting uses the config root variable and the Path was not set in the ConfigurationSet.

Initializes a new instance of the class.

Unit name. Setting.

Gets the resource name.

Gets the setting that reference the config root variable.

Extension method for Exception.

Gets the most inner exception.

Exception. Most inner exception.

Extensions for Hashtable.

Convert a hashtable to a value set.

hashtable. Value set.

Extensions methods for class.

Calls Invoke with to stop execution of commands.

PowerShell. Collection of PSObjects representing output.

Calls Invoke with to stop execution of commands.

Type of output object(s) expected from the command invocation. PowerShell. Collection of the type output representing output.

Gets the error stream message if any.

PowerShell. Error message. Null if none.

Determines if the given shell contains a property error, meaning that the source of this error is the configuration values and not the configuration unit itself.

The shell to inspect. True if it only contains property errors; false otherwise.

Extensions for ValueSet.

Extension method to transform a ValueSet to a Hashtable.

Value set. A hashtable.

Gets ordered list from a ValueSet that is threated as an array.

ValueSet. Ordered list.

Performs a deep compare of the ValueSets.

First ValueSet. Second ValueSet. Whether the two ValueSets equal.

Contains information about the unit and the DSC resource that applies to it.

Initializes a new instance of the class.

Configuration unit internal. DscResourceInfoInternal.

Gets or initializes the internal unit.

Gets the configuration unit.

Gets the DSC resource name.

DSC resource name.

Gets the module specification.

Gets a directive if exits.

Name of directive. The value of the directive. Null if doesn't exist. Directive type value.

Gets a directive bool value.

Name of directive. The value of the directive. False if not set.

Gets the settings of the unit.

ValueSet with settings.

Wrapper around Configuration units and its directives. Creates a normalized directives map for consumption.

Initializes a new instance of the class.

Configuration unit. The configuration file path.

Gets the configuration unit.

Gets a value indicating whether the unit type should be treated as the resource name.

Gets the module specification.

Gets the resource name *only*. For example, "Resource".

Gets the qualified name, which includes the module. For example, "Module/Resource".

Gets the directive value from the unit taking into account the directives overlay.

Directive name. Value of directive, null if not found. Directive type value.

Gets the bool value of a directive from the unit taking into account the directives overlay.

Directive name. Value of directive, false if not found.

Gets the semantic version, if any.

SemanticVersion, null if not specified.

Gets the semantic min version, if any.

SemanticVersion, null if not specified.

Gets the semantic max version, if any.

SemanticVersion, null if not specified.

TODO: Implement for more variables. I am so sad because rs.SessionStateProxy.InvokeCommand.ExpandString doesn't work as I wanted. PowerShell assumes all code passed to ExpandString is trusted and we cannot assume that.

ValueSet with settings.

Implements IDiagnosticInformation.

DscResources in the system. Get-DscResource looks the entire PSModulePath to find resources every time, so calling it multiples times is expensive. This class will store them in memory per configuration set. The resources are stored in a dictionary in the following hierarchy. - Module name - Resource name - Module Version - DscResourceInfo obj. There are some resources that don't have a module name. These are modules that live under C:\WINDOWS\system32\WindowsPowershell\v1.0\Modules\PsDesiredStateConfiguration\DscResources. This is not currently used. For now, we let PowerShell handle all the versioning. In order to avoid calls to Get-DscResource every time a unit is set, this class needs to be updated to handle min and max version. As it is, it just does RequiredVersion.

Initializes a new instance of the class.

DSC Resources.

Looks for a DSC resource in the specified module.

DSC resource name. Optional module name. Optional module version. DscResourceInfoInternal. Null if not found.

Does a DSC resource exists.

DSC resource name. Optional module name. Optional module version. True if resource exists.

Represents a map versions for a DscResource.

Adds a resource version.

DscResourceInfo.

Represent a map of resources for a module.

Interface for PowerShellGet cmdlets.

Calls Find-Module.

PowerShell instance. Module name. Optional version. Optional min version. Optional max version. Optional repository. Optional allow prerelease module. Module info, null if not found.

Calls Find-DscResource.

PowerShell instance. resource name. Optional module name. Optional version. Optional min version. Optional max version. Optional repository. Optional allow prerelease module. Dsc Resource info, null if not found.

Calls Save-Module with module specification.

PowerShell instance. Module specification. Location to save module.

Calls Save-Module -InputObject object -Path location. Input object must be the result of Find cmdlets of PowerShellGet.

PowerShell instance. Input object. Location to save module.

Calls Install-Module -InputObject object. Input object must be the result of Find cmdlets of PowerShellGet.

PowerShell instance. Input object. If to install to all users.

Calls Install-Module with a module specification.

PowerShell instance. Module specification. If to install to all users.

PowerShellGet implementation for 2.2.5 .

General PowerShell helpers.

Creates a module specification object.

Module name. Optional version. Optional min version. Optional max version. Optional guid. ModuleSpecification.

A semantic version.

Initializes a new instance of the class.

Version.

Gets the version without a prerelease tag.

Gets prerelease tag if any.

Gets a value indicating whether if the semantic version is prerelease.

Max out a version by replacing * if needed.

Version. Maxed version.

String helpers.

Normalize string.

Value. Normalized string.

Type helpers.

Verifies a property exists.

Dynamic object. Name of property. True if property exists.

Verifies a property exists with the specified type.

Expected type. Dynamic object. Name of property. True if property and is of the specified type.

Verifies the property exist and is an enum.

Dynamic object. Name of property. True if property exists and is an enum.

Verifies the property exists and is a list. Use this when you don't know the type of the List.

Dynamic object. Name of property. True if property exists and is a list.

Gets all the properties and values from an object.

Object. ValueSet with properties names and values.

Gets a compatible type for a ValueSet value.

Type. Value. Value converted to a compatible type.

Process environment. Provides interaction with PowerShell for a hosted environment.

Initializes a new instance of the class.

PowerShell Runspace. Configuration processor type. IDscModule.

Gets the DscModule.

Gets or initializes the set processor factory.

IProcessorEnvironment. Provides interaction with PowerShell.

Gets the runspace.

Validates the runspace.

Gets all DSC resource.

A list with the DSC resource.

Gets all resources in a module.

Module specification. List of resources.

Gets a DSC Resource.

Configuration unit internal. DSC Resource.

Calls Invoke-DscResource -Method Get from this module.

Settings. Name. Module specification. Properties of resource.

Calls Invoke-DscResource -Method Test from this module.

Settings. Name. Module specification. Is in desired state.

Calls Invoke-DscResource -Method Set from this module.

Settings. Name. Module specification. If a reboot is required.

Calls Get-Module with fully qualified name.

Module name. PSModuleInfo, null if not imported.

Calls Get-Module with the fully qualified name and using ListAvailable.

Module specification. PSModuleInfo, null if not found.

Calls Get-Module from a path using ListAvailable.

Path. The first module returned, null if none.

Calls Import-Module with the fully qualified name.

Module specification.

Calls Import-Module with a file path.

Module file path.

Calls Get-InstalledModule.

Module specification. Module info, null if not installed.

Calls Find-Module.

Configuration unit internal. Module info, null if not found.

Calls Find-DscResource.

Configuration unit internal. Dsc Resource info, null if not found.

Calls Save-Module -InputObject object -Path location. Input object must be the result of Find cmdlets of PowerShellGet.

Input object. Location to save module.

Calls Save-Module.

Module specification. Location to save module.

Calls Install-Module -InputObject object. Input object must be the result of Find cmdlets of PowerShellGet.

Input object.

Calls Install-Module with a module specification.

Module specification.

Get unique certificates of valid signed files from the specified paths.

Path. List with valid signatures.

Gets the value of a variable.

Type of the variable. Name of variable. The value of a variable, null if doesn't exist.

Sets a variable with its value.

Name of variable. Value of variable.

Overwrites PSModulePath with the specified path.

Path.

Overwrites PSModulePath with the specified paths.

Paths.

Prepends path to the PSModulePath.

Path.

Prepends paths to the PSModulePath.

Paths.

Append path to the PSModulePath.

Path.

Append paths to the PSModulePath.

Path.

Removes a path from the module path.

Path.

Sets the location for installing modules.

Location. Path for custom location.

Factory class to create a processor environment.

Initializes a new instance of the class.

Configuration processor type.

Create process environment.

Optional processor factory. Configuration processor policy. IProcessorEnvironment.

Properties for the configuration processor factory.

Gets or sets the processor type.

Gets or sets the additional module paths.

Gets or sets the configuration policy.

Gets or sets the module location.

Gets or sets the install module path. Only used for Scope.Custom.

The location where modules are going to be installed.

Current user path.

AllUsers path. Requires admin.

The winget location %LOCALAPPDATA%\Microsoft\WinGet\Configuration\Modules.

Custom path.

Default.

Processor policy. For Processor type Default and Hosted they mean the same as PowerShell ExecutionPolicy. https://learn.microsoft.com/en-us/powershell/module/microsoft.powershell.core/about/about_execution_policies.

Unrestricted.

RemoteSigned.

AllSigned.

Restricted.

Bypass.

Undefined.

Default.

Configuration processor runspace type.

Uses default runspace. Requires to be running in PowerShell. Uses current runspace.

Creates a new runspace in a hosted environment.

ConfigurationSetProcessorFactory implementation.

Initializes a new instance of the class.

Diagnostics event; useful for logging and/or verbose output.

Gets or sets the minimum diagnostic level to send.

Gets or sets the limitation set. Limitation set can only be set once.

Gets or sets the processor type.

Gets or sets the additional module paths.

Gets or sets the implicit module paths. These paths are always included in AdditionalModulePaths.

Gets or sets the configuration policy.

Gets or sets the module location.

Gets or sets the install module path. Only used for Scope = Custom.

Gets the configuration unit processor details for the given unit.

Configuration Set. Configuration set processor.

Gets the winget module path.

The winget module path.

Sends diagnostics if appropriate.

The level of this diagnostic message. The diagnostic message.

Sends diagnostic if appropriate for PowerShell streams.

The level of this diagnostic message. The PowerShell object.

Configuration set processor.

Initializes a new instance of the class.

The processor environment. Configuration set. Whether the set processor should work in limitation mode.

Gets or initializes the set processor factory.

Gets the processor environment.

Gets a value indicating whether the set processor is running in limit mode.

Creates a configuration unit processor for the given unit.

Configuration unit. A configuration unit processor.

Gets the configuration unit processor details for the given unit.

Configuration unit. Detail flags. Configuration unit processor details.

Finds the module and preferred resource name for processing the configuration unit.

The internal configuration unit. A tuple containing the module info and preferred resource name, or null if not found.

Implements IApplySettingsResult.

Initializes a new instance of the class.

The configuration unit that the result is for.

Gets the configuration unit that the result is for.

Gets the implementation object for ResultInformation.

Provides access to a specific configuration unit within the runtime.

Initializes a new instance of the class.

Processor environment. UnitResource. Whether it is under limit mode.

Gets the configuration unit that the processor was created for.

Gets or initializes the set processor factory.

Gets the current system state for the configuration unit. Calls Get on the DSC resource.

A .

Determines if the system is already in the state described by the configuration unit. Calls Test on the DSC resource.

A .

Applies the state described in the configuration unit. Calls Set in the DSC resource.

A .

Provides information for a specific configuration unit within the runtime.

Initializes a new instance of the class.

Unit name. DSC Resource Info. PSModuleInfo. GetModuleInfo. List of certificates..

Gets the name of the unit of configuration.

Gets the description of the unit of configuration.

Gets the URI of the documentation for the unit of configuration.

Gets the URI of the icon for the unit of configuration.

Gets the name of the module containing the unit of configuration.

Gets the type of the module containing the unit of configuration.

Gets the source of the module containing the unit of configuration.

Gets the description of the module containing the unit of configuration.

Gets the URI of the documentation for the module containing the unit of configuration.

Gets the URI for the published module containing the unit of configuration.

Gets the version of the module containing the unit of configuration.

Gets the publishing date of the module containing the unit of configuration.

Gets a value indicating whether the module is already present on the system.

Gets the author of the module containing the unit of configuration.

Gets the publisher of the module containing the unit of configuration.

Gets the signing certificate of the module files containing the unit of configuration.

Gets the settings information for the unit of configuration.

Gets a value indicating whether the module comes from a public repository.

Implements IConfigurationUnitResultInformation.

Provides information for a specific configuration unit setting.

Initializes a new instance of the class.

DSC Resource info.

Gets the name of the setting.

Gets the title of the setting.

Gets the description of the setting.

Gets a value indicating whether the setting is a key. This is used to determine if different settings are in conflict.

Gets a value indicating whether a non-empty value for the setting is required.

Gets a value indicating whether the setting should be serialized in order to be applied on another system.

Gets the data type for the value of this setting.

Gets the semantics to be used for this setting. The goal is to enable richer conflict detection and authoring scenarios by having a deeper understanding of this value than "String".

Implements IGetAllSettingsResult.

Initializes a new instance of the class.

The configuration unit that the result is for.

Gets the configuration unit that the result is for.

Gets the implementation object for ResultInformation.

Implements IGetSettingsResult.

Initializes a new instance of the class.

The configuration unit that the result is for.

Gets the configuration unit that the result is for.

Gets the implementation object for ResultInformation.

Implements ITestSettingsResult.

Initializes a new instance of the class.

The configuration unit that the result is for.

Gets the configuration unit that the result is for.

Gets the implementation object for ResultInformation.