05:08:40| |=============================== |===================================================================================== 05:08:40| | called by Component Setup EXE | Logfile created/appended by Setup EXE 2025-04-23 05:08:40| |=============================== |===================================================================================== 05:08:40| |Compsetupstarter-InitInstance | Setup64.exe fileversion: 708.100.101.4 05:08:40| |Compsetupstarter-InitInstance | FullCommandLine: "F:\InstData\S7DOS32_64\S7DOS64\Media\setup64.exe" -s 05:08:40| |Compsetupstarter-InitInstance | LoggingLevel: 11 05:08:40| |Compsetupstarter-InitInstance | Read from Version.ini 05:08:40| |Compsetupstarter-InitInstance | RegKey= S7DOS64 (Name) 05:08:40| |Compsetupstarter-InitInstance | Name= SIMATIC Device Drivers (NameDispl) 05:08:40| |Compsetupstarter-InitInstance | ProductCode= {CCC01ADD-3A54-15D6-92A8-00A0245B3AC6} 05:08:40| |Compsetupstarter-InitInstance | UpgradeCode= {DDD01AEE-3A54-15D6-92A8-00A0245B3AC6} 05:08:40| |Compsetupstarter-InitInstance | Version= 09.03.0400 05:08:40| |Compsetupstarter-InitInstance | Release= 09.03.04.00_01.01.00.37 05:08:40| |Compsetupstarter-InitInstance | Frame Version= 05:08:40| |Compsetupstarter-InitInstance | found OS: 602 Build: 9200 Workstation SuiteMask: 256 05:08:40| |Compsetupstarter-TestMSI | MSI Version required: 3.1.4000.1823 installed: 5.0.19041.3636 05:08:40| |Compsetupstarter-TestMSI | DCOM settings O.K. 05:08:40| |Compsetupstarter-TestRegistryRi | TestRegistryRights: HKLM\Software\Siemens\Shared Tools 05:08:40| |Compsetupstarter-TestRegistryRi | TestRegistryRights: HKLM\Software\Siemens\Shared Tools\CompSetup 05:08:40| |Compsetupstarter-TestRegistryRi | TestRegistryRights: HKLM\Software\Siemens\Shared Tools\S7DOS64 05:08:40| |Compsetupstarter-TestRegistryRi | Registry Key not found at HKLM\Software\Siemens\Shared Tools\S7DOS64 05:08:40| |Compsetupstarter-TestRegistryRi | TestRegistryRights: HKLM\Software\Siemens\Shared Tools\S7DOS64\Clients 05:08:40| |Compsetupstarter-TestRegistryRi | Registry Key not found at HKLM\Software\Siemens\Shared Tools\S7DOS64\Clients 05:08:40| |Compsetupstarter-GetRegValue | Read Client entry: HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup Client= SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:08:40| |Compsetupstarter-ReadAndSetClie | Clientname from registry: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:08:40| |Compsetupstarter-GetRegValue | Read SetupLanguage entry: HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup SetupLanguage= B 05:08:40| |Compsetupstarter-ReadAndSetLang | SetupLanguage chosen: 1033 05:08:40| |Compsetupstarter-TestForMsiMute | Test for Mutex... 05:08:40| |Compsetupstarter-TestForMsiMute | No MSI active (no Mutex existing) 05:08:40| |Compsetupstarter-InitInstance | Stream out from: F:\InstData\S7DOS32_64\S7DOS64\Media\simatic device drivers.msi 05:08:40| |Compsetupstarter-InitInstance | Stream out to: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\Properties.ini 05:08:40| |Compsetupstarter-InitInstance | TimeOut from Properties.ini: 20 05:08:40| |Compsetupstarter-InitInstance | TimeOut from Commandline: 05:08:40| |Compsetupstarter-InitInstance | used TimeOut: 20 minutes 05:08:40| |Compsetupstarter-InitInstance | 05:08:40| |Compsetupstarter-InitInstance |Test D e i n s t a l l a t i o n 05:08:40| |Compsetupstarter-TestForMsiMute | Test for Mutex... 05:08:40| |Compsetupstarter-TestForMsiMute | No MSI active (no Mutex existing) 05:08:40| |Compsetupstarter-DeinstOldVersi | DeinstallOldVersion... 05:08:40| |Compsetupstarter-DetMainMsiKey | Determine Mainkey: No HKClassesR key... 05:08:40| |Compsetupstarter-DetMainMsiKey | Determine Mainkey: No HKCUser key.. 05:08:40| |Compsetupstarter-DeinstOldVersi | Full release you want to install: V09.03.04.0_01.01.0.37 05:08:40| |Compsetupstarter-TestIfInstalle | Test if Component Installed... 05:08:40| |Compsetupstarter-TestIfInstalle | MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCC01ADD-3A54-15D6-92A8-00A0245B3AC6} 05:08:40| |Compsetupstarter-SearchMSIRest | MSI Setup not found in Registry: HKLM\Software\Classes\Installer\Products\DDA10CCC45A36D51298A000A42B5A36C 05:08:40| |Compsetupstarter-TestIfInstalle | IsInstalled: 0; MsiCompInstalled: 0 05:08:40| |Compsetupstarter-DeinstOldVersi | Component not installed. No deinstall necessary. 05:08:40| |Compsetupstarter-DeinstOldVersi | END DeinstallOldVersion 05:08:40| |Compsetupstarter-InitInstance | 05:08:40| |Compsetupstarter-InitInstance |Test I n s t a l l a t i o n 05:08:40| |Compsetupstarter-TestForMsiMute | Test for Mutex... 05:08:40| |Compsetupstarter-TestForMsiMute | No MSI active (no Mutex existing) 05:08:40| |Compsetupstarter-Install | Install section... 05:08:40| |Compsetupstarter-TestIfInstalle | Test if Component Installed... 05:08:40| |Compsetupstarter-TestIfInstalle | MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCC01ADD-3A54-15D6-92A8-00A0245B3AC6} 05:08:40| |Compsetupstarter-SearchMSIRest | MSI Setup not found in Registry: HKLM\Software\Classes\Installer\Products\DDA10CCC45A36D51298A000A42B5A36C 05:08:40| |Compsetupstarter-TestIfInstalle | IsInstalled: 0; MsiCompInstalled: 0 05:08:40| |Compsetupstarter-Install | Component not (already and/or no longer) installed: Will install it... 05:08:40| |Compsetupstarter-SetInputParams | x86_adscomlx: Client entry set: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:08:40| |Compsetupstarter-LaComForInst | Launch installation: Call_msiexec 05:08:40| |Compsetupstarter-Call_msiexec | Call_msiexec: Commandline= C:\Windows\System32\msiexec.exe /i "F:\InstData\S7DOS32_64\S7DOS64\Media\simatic device drivers.msi" /qn /L*V "C:\PROGRAMDATA\SIEMENS\AUTOMATION\LOGFILES\SETUP\S7DOS64_LOG_MSI_INTERN.TXT" ALLUSERS=1 TIMEOUT=20 ADS_CALLED_EXTERNAL=1 LOGGINGMAX=1 WIN10VERSION=0 05:08:40| |Compsetupstarter-Call_exeS |Start ShellExecuteEx: File= C:\Windows\System32\msiexec.exe; Parameters= /i "F:\InstData\S7DOS32_64\S7DOS64\Media\simatic device drivers.msi" /qn /L*V "C:\PROGRAMDATA\SIEMENS\AUTOMATION\LOGFILES\SETUP\S7DOS64_LOG_MSI_INTERN.TXT" ALLUSERS=1 TIMEOUT=20 ADS_CALLED_EXTERNAL=1 LOGGINGMAX=1 WIN10VERSION=0 05:08:40| |---- START Component Setup ---- |=> MSI Component Setup started 05:08:40| |_ADSStartup |CA: START _ADSStartup (InstallExecuteSequence) 05:08:40| |_ADSStartup | Set Property ADS_RETURNCODE to 0 05:08:40| |_ADSStartup | Set Property LOGGINGLEVEL to 11 05:08:40| |_ADSStartup | Set Property ADS_TICKSTART to 37669 05:08:40| |_ADSStartup | Set Property ADS_APPL_WAITTIME to 05:08:40| |_ADSStartup | Set Property SETUP64 to YES 05:08:40| |_ADSStartup | Ext: 1 - Nested: - Deinst: 05:08:40| | | 05:08:40| |adsglobx::InitProperties | InitProperties... 05:08:40| | info |-------------------------------------------------------------------------------- 05:08:40| | info | START LOGFILE from MSI Shared Component Setup 05:08:40| | info |-------------------------------------------------------------------------------- 05:08:40| | info | Log-Filename: C:\ProgramData\Siemens\Automation\Logfiles\Setup\S7DOS64_LOG.TXT 05:08:40| | info | Start Installation: 2025-04-23 05:08:40 05:08:40| | info | Frame Name: Component-Setup Masterframe 05:08:40| | info | Frame Version: 07.08.01.00_01.01.00.04 05:08:40| | info | Logginglevel: 11 05:08:40| | info | Setup64: YES 05:08:40| | info | this is a x64 Setup for x64 OS 05:08:40| | info | Running on 64bit Windows: VersionNT=603 ServicePack=0 SystemLanguage=1055 05:08:40| | | 05:08:40| |adsglobx::InitProperties |-- MSI new installation assumed. REINSTALL: 0 05:08:40| | | 05:08:40| |adsglobx::InitProperties | Set Property ADS_TEMPDIR to C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ 05:08:40| |adsglobx::InitProperties | Set Property INIINST to C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\Properties.ini 05:08:40| |adsglobx::InitProperties | Set Property UseINSTALLDIR to NO 05:08:40| |CPermanentProperties::CheckProp | Check PermanentProperties... 05:08:40| |CPermanentProperties::CheckProp | Set 0 PermanentProperties 05:08:40| |---- END Component Setup ---- |CA: END _ADSStartup 05:08:41| | | 05:08:41| |_SetMSISource |CA: START _SetMSISource 05:08:41| |_SetMSISource | New install 05:08:41| |_SetMSISource |CA: END _SetMSISource 05:08:41| | | 05:08:41| |_ADS_CompInitialize |CA: START _ADS_CompInitialize 05:08:41| |_ADS_CompInitialize | Read Property SETUP64: YES 05:08:41| |_ADS_CompInitialize | this is a x64 Setup for x64 OS 05:08:41| |_ADS_CompInitialize | Read Property REG_STARTMENU_LANG: 1033 05:08:41| |_ADS_CompInitialize | Global Startmenu Language from Registry: 1033 05:08:41| |_ADS_CompInitialize | Set Property GLOBAL_STARTMENULANGUAGE to 1033 05:08:41| |WriteReg_CompSetup | Set Registry StartMenuLang= 1033 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:08:41| |_ADS_CompInitialize | Set Property COMPSUCCEEDEDVALUE to 1 05:08:41| |_ADS_CompInitialize | Set Property G_REBOOT to FALSE 05:08:41| |_ADS_CompInitialize | Set Property COMMONDIR_INTERN to 05:08:41| |ReadGlobalInfoFromIniFile_Comp | ReadGlobalInfoFromIniFile_Comp... 05:08:41| |ReadGlobalInfoFromIniFile_Comp | Read Property REMOVE: is empty! 05:08:41| |ReadGlobalInfoFromIniFile_Comp | Read Property ProductName: SIMATIC Device Drivers 05:08:41| |ReadGlobalInfoFromIniFile_Comp | Official name of this Shared Component: SIMATIC Device Drivers 05:08:41| |ReadGlobalInfoFromIniFile_Comp | Read Property RELEASE: 09.03.04.00_01.01.00.37 05:08:41| |ReadGlobalInfoFromIniFile_Comp | Read Property RegVersion: 9.3 05:08:41| |ReadGlobalInfoFromIniFile_Comp | Read Property SOURCEDIR: is empty! 05:08:41| |ReadGlobalInfoFromIniFile_Comp | could not read SOURCEDIR 05:08:41| |ReadGlobalInfoFromIniFile_Comp | Read Property OriginalDatabase: F:\InstData\S7DOS32_64\S7DOS64\Media\simatic device drivers.msi 05:08:41| |ReadGlobalInfoFromIniFile_Comp | The SETUP is started from: F:\InstData\S7DOS32_64\S7DOS64\Media 05:08:41| |ReadGlobalInfoFromIniFile_Comp | Comparing with data of F:\InstData\S7DOS32_64\S7DOS64\Media\version.ini 05:08:41| |ReadGlobalInfoFromIniFile_Comp | Compare Release from version.ini (09.03.04.00_01.01.00.37) and internal version (09.03.04.00_01.01.00.37) 05:08:41| |ReadGlobalInfoFromIniFile_Comp | Releases are identical 05:08:41| |ReadGlobalInfoFromIniFile_Comp | Read Property MAINPROD_NAME: STEP7 05:08:41| |ReadGlobalInfoFromIniFile_Comp | Read Property MAINPROD_NAMEDISPL: STEP 7 05:08:41| |ReadGlobalInfoFromIniFile_Comp | END ReadGlobalInfoFromIniFile_Comp 05:08:41| |_ADS_CompInitialize | Read Property SHORTNAME: S7DOS64 05:08:41| |WriteReg_SetupSucceeded | Set Registry SetupSucceeded= 0 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:08:41| |WriteReg_CompSetup | Set Registry Restart= 0 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:08:41| |WriteReg_CompSetup | Set Registry StarterTimeout= 0 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:08:41| |_ADS_CompInitialize | Read Property ProductName: SIMATIC Device Drivers 05:08:41| |WriteReg_CompSetup | Set Registry ComponentEntry= SIMATIC Device Drivers in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:08:41| |ReadReg_CompSetup | cannot read Registry UPDATEMODE from HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup ReturnValue= 2 05:08:41| |compsetup_fct::GetClient_Comp | GetClient_Comp... 05:08:41| |compsetup_fct::GetClient_Comp | Read Property SETUP64: YES 05:08:41| |ReadReg_CompSetup | Read Registry Client= SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 from HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:08:41| |compsetup_fct::GetClient_Comp | Set MSI Property SHRCOMPCLIENT to: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:08:41| |_ADS_CompInitialize |CA: END _ADS_CompInitialize Returncode=0 05:08:41| | | 05:08:41| |_ADS_SetDirs |CA: START _ADS_SetDirs 05:08:41| |_ADS_SetDirs | STARTMENU_PLACE: AUTO 05:08:41| |_ADS_SetDirs | Set startmenu= C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Siemens Automation\ 05:08:41| |_ADS_SetDirs | Set MSI TargetPath SIEMENSMENUFOLDER to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Siemens Automation\ 05:08:41| |_ADS_SetDirs | Set Property SIEMENSMENUFOLDER to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Siemens Automation\ 05:08:41| |_ADS_SetDirs |CA: END _ADS_SetDirs 05:08:42| | | 05:08:42| |_TestSupposition |CA: START _TestSupposition 05:08:42| |_TestSupposition | Read Property SHORTNAME: S7DOS64 05:08:42| |_TestSupposition | Read Property WIN10VERSION: 0 05:08:42| |Suppositions::TestCondition | Read Property OF_NO_OS_CHECK: is empty! 05:08:42| |Suppositions::TestCondition | OS Condition to check: (((VersionNT = 601)) OR ((VersionNT = 602)) OR ((VersionNT = 603)) OR ((VersionNT = 602)) OR ((VersionNT = 603)) OR ((VersionNT = 1000)) OR ((VersionNT = 1000))) 05:08:42| |CMSI_dbc::EvaluateCondition | Condition (((VersionNT = 601)) OR ((VersionNT = 602)) OR ((VersionNT = 603)) OR ((VersionNT = 602)) OR ((VersionNT = 603)) OR ((VersionNT = 1000)) OR ((VersionNT = 1000))) return TRUE 05:08:42| |_TestSupposition | Installation is allowed. 05:08:42| |_TestSupposition |CA: END _TestSupposition Returncode=0 05:08:42| | | 05:08:42| |_SiemInstGlobal_WriteBegin |CA: START _SiemInstGlobal_WriteBegin 05:08:42| |::SiemInstGlobal_WriteBegin | Read Property REMOVE: is empty! 05:08:42| |::GetLogFileCitamis | Citamis path: C:\ProgramData\Siemens\Automation\Logfiles\Setup\Citamis.str 05:08:42| |::SiemInstGlobal_WriteBegin | Read Property SHRCOMPCLIENT: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:08:42| |::SiemInstGlobal_WriteBegin | Read Property SHORTNAME: S7DOS64 05:08:42| |::SiemInstGlobal_WriteBegin | Read Property RELEASE: 09.03.04.00_01.01.00.37 05:08:42| |::SiemInstGlobal_WriteBegin | Read Property RegVersion: 9.3 05:08:42| |::WriteTextToCitamis | Write to Citamis: Shared Component (MSI) S7DOS64; Release: 09.03.04.00_01.01.00.37; Version: 9.3; 04-23-2025; 05:08:42; (SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9) 05:08:42| |_SiemInstGlobal_WriteBegin |CA: END _SiemInstGlobal_WriteBegin 05:08:43| | | 05:08:43| |_ProcessBeforeInst |CA: START _ProcessBeforeInst 05:08:43| |WriteCADataProperties | WriteCADataProperties... 05:08:43| |WriteCADataProperties | Read Property ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ 05:08:43| |WriteCADataProperties | Set Property CA_DATAFILENAME to C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\CA_DataFile.ini 05:08:43| |WriteCADataProperties | save Properties to C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\CA_DataFile.ini 05:08:43| |WriteCADataProperties | END WriteCADataProperties 05:08:43| |_ProcessBeforeInst |CA: END Process before Installation 05:08:43| | | 05:08:43| |_Comp_BeforeDataMove |CA: START _Comp_BeforeDataMove 05:08:43| |_Comp_BeforeDataMove | Read Property SHORTNAME: S7DOS64 05:08:43| |_Comp_BeforeDataMove | Read Property RegVersion: 9.3 05:08:43| |_Comp_BeforeDataMove | Read Property RELEASE: 09.03.04.00_01.01.00.37 05:08:43| |_Comp_BeforeDataMove | Read Property ADSCOMMANDLINE: is empty! 05:08:43| |_Comp_BeforeDataMove | Read Property SETUP64: YES 05:08:43| |TestUpdateRulesAndClient_Comp | TestUpdateRulesAndClient_Comp... 05:08:43| |TestUpdateRulesAndClient_Comp | Read Property ProductName: SIMATIC Device Drivers 05:08:43| |TestUpdateRulesAndClient_Comp | Read Property SHRCOMPCLIENT: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:08:43| |TestUpdateRulesAndClient_Comp | Read Property RegVersion: 9.3 05:08:43| |TestUpdateRulesAndClient_Comp | Read Property RELEASE: 09.03.04.00_01.01.00.37 05:08:43| |TestUpdateRulesAndClient_Comp | Read Property ADSCOMMANDLINE: is empty! 05:08:43| |TestUpdateRulesAndClient_Comp | Read Property INST_RELEASE: is empty! 05:08:43| |TestUpdateRulesAndClient_Comp | Read Property RESUME: is empty! 05:08:43| |TestUpdateRulesAndClient_Comp | Read Property SETUP64: YES 05:08:43| |TestUpdateRulesAndClient_Comp | Set Property GETSTRING to 05:08:43| |TestUpdateRulesAndClient_Comp | END TestUpdateRulesAndClient_Comp 05:08:43| |GetCommonDestPath_Comp | GetCommonDestPath_Comp... 05:08:43| |GetCommonDestPath_Comp | Read Property SETUP64: YES 05:08:43| |GetCommonDestPath_Comp | Read Property CommonFiles64Folder: C:\Program Files\Common Files\ 05:08:43| |GetCommonDestPath_Comp | Read Property REMOVE: is empty! 05:08:43| |GetCommonDestPath_Comp | Read Property REINSTALL: is empty! 05:08:43| |GetCommonDestPath_Comp | Main Path and Common Path determination ... 05:08:43| |GetCommonDestPath_Comp | read from Properties.ini: [Path] UseComPath=YES 05:08:43| |GetCommonDestPath_Comp | read from Properties.ini: [Path] PathCom= 05:08:43| |GetCommonDestPath_Comp | Set Property USECOMMONDIR to TRUE 05:08:43| |GetCommonDestPath_Comp | Common directory ... 05:08:43| |Read_FromRegistry | Read Registry SharedPath= C:\Program Files\Common Files\Siemens from HKEY_LOCAL_MACHINE\SOFTWARE\Siemens\AUTSW\Global 05:08:43| |GetCommonDestPath_Comp | Read Property IS_LANGUAGEPACK: NO 05:08:43| |GetCommonDestPath_Comp | Set Property COMMONDIR_INTERN to C:\Program Files\Common Files\Siemens\ 05:08:43| |CMSI_dbc::GetTargetPath | Read MSI GetTargetPath COMMONDIR: C:\Program Files (x86)\Common Files\Siemens\ 05:08:43| |CMSI_dbc::SetTargetPath | Try to set MSI SetTargetPath COMMONDIR to C:\Program Files\Common Files\Siemens\ 05:08:43| |CMSI_dbc::SetTargetPath | Set MSI SetTargetPath COMMONDIR to C:\Program Files\Common Files\Siemens\ 05:08:43| | | Read Property CommonFiles64Folder: C:\Program Files\Common Files\ 05:08:43| | | Read Property CommonFilesFolder: C:\Program Files (x86)\Common Files\ 05:08:43| |GetCommonDestPath_Comp | Set Property COMMONDIR_WOW_INTERN to C:\Program Files (x86)\Common Files\Siemens\ 05:08:43| |CMSI_dbc::GetTargetPath | Read MSI GetTargetPath COMMONDIR_WOW: C:\Program Files (x86)\Common Files\Siemens\ 05:08:43| |CMSI_dbc::SetTargetPath | Try to set MSI SetTargetPath COMMONDIR_WOW to C:\Program Files (x86)\Common Files\Siemens\ 05:08:43| |CMSI_dbc::SetTargetPath | Set MSI SetTargetPath COMMONDIR_WOW to C:\Program Files (x86)\Common Files\Siemens\ 05:08:43| |GetCommonDestPath_Comp | END GetCommonDestPath_Comp 05:08:43| |GetMainDestPath_Comp | GetMainDestPath_Comp... 05:08:43| |GetMainDestPath_Comp | Read Property COMMONDIR: C:\Program Files\Common Files\Siemens\ 05:08:43| |GetMainDestPath_Comp | Read Property TARGMAIN: is empty! 05:08:43| |GetMainDestPath_Comp | Read Property REINSTALL: is empty! 05:08:43| |GetMainDestPath_Comp | Read Property REMOVE: is empty! 05:08:43| |GetMainDestPath_Comp | Read Property MAINPROD_NAME: STEP7 05:08:43| |GetMainDestPath_Comp | Read Property SETUP64: YES 05:08:43| |GetMainDestPath_Comp | Base Dir is Common Path: C:\Program Files\Common Files\Siemens\ 05:08:43| |GetMainDestPath_Comp | Set Property BASEDIR to C:\Program Files\Common Files\Siemens\ 05:08:43| |GetMainDestPath_Comp | read from Properties.ini: [Path] UseMainPath=NO 05:08:43| |GetMainDestPath_Comp | MainPath isn't set because 'UseMainPath=' is not set to YES. 05:08:43| |GetMainDestPath_Comp | Set Property TARGMAIN to C:\Program Files\Common Files\Siemens\ 05:08:43| |GetMainDestPath_Comp | REINSTALL: 0 05:08:43| |CMSI_dbc::GetTargetPath | Read MSI GetTargetPath INSTALLDIR: C:\ 05:08:43| |CMSI_dbc::SetTargetPath | Try to set MSI SetTargetPath INSTALLDIR to C:\Program Files\Common Files\Siemens\ 05:08:43| |CMSI_dbc::SetTargetPath | Set MSI SetTargetPath INSTALLDIR to C:\Program Files\Common Files\Siemens\ 05:08:43| |CMSI_dbc::GetTargetPath | Read MSI GetTargetPath INSTALLDIR: C:\Program Files\Common Files\Siemens\ 05:08:43| |GetMainDestPath_Comp | Set Property INSTALLDIR to: C:\Program Files\Common Files\Siemens\ 05:08:43| |GetMainDestPath_Comp | determine INSTALLDIR_WOW 05:08:43| |CMSI_dbc::GetTargetPath | Read MSI GetTargetPath INSTALLDIR: C:\Program Files\Common Files\Siemens\ 05:08:43| |GetMainDestPath_Comp | Set Property INSTALLDIR_WOW to C:\Program Files (x86)\Common Files\Siemens\ 05:08:43| |CMSI_dbc::GetTargetPath | Read MSI GetTargetPath INSTALLDIR_WOW: C:\ 05:08:43| |CMSI_dbc::SetTargetPath | Try to set MSI SetTargetPath INSTALLDIR_WOW to C:\Program Files (x86)\Common Files\Siemens\ 05:08:43| |CMSI_dbc::SetTargetPath | Set MSI SetTargetPath INSTALLDIR_WOW to C:\Program Files (x86)\Common Files\Siemens\ 05:08:43| |GetMainDestPath_Comp | END GetMainDestPath_Comp 05:08:43| |WriteCAPathProperties | WriteCAPathProperties... 05:08:43| |WriteCAPathProperties | Read Property CA_DATAFILENAME: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\CA_DataFile.ini 05:08:43| |WriteCAPathProperties | END WriteCAPathProperties 05:08:43| |_Comp_BeforeDataMove | Read Property ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ 05:08:43| |CMSI_dbc::WriteTables | WriteTables... 05:08:43| |CMSI_dbc::WriteTables | Write IniFile 'C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ADS_Tables.ini' for ADS Tables 05:08:43| |CMSI_dbc::WriteTables | Write SetAttributesBefore 05:08:43| |CDeferredIniTable::WriteTable | Write IniFile for section SetAttributesBefore 05:08:43| |CDeferredIniTable::WriteTable | Query: SELECT `Path`, `Attributes`, `Function` FROM ADS_SetAttributesBefore 05:08:43| |CMSI_dbc::WriteTables | Write SetAttributesAfter 05:08:43| |CDeferredIniTable::WriteTable | Write IniFile for section SetAttributesAfter 05:08:43| |CDeferredIniTable::WriteTable | Query: SELECT `Path`, `Attributes`, `Function` FROM ADS_SetAttributesAfter 05:08:43| |CMSI_dbc::WriteTables | Write AppendRegistry 05:08:43| |CDeferredIniTable::WriteTable | Write IniFile for section AppendRegistry 05:08:43| |CDeferredIniTable::WriteTable | Query: SELECT `Root`, `Key`, `Name`, `AppendValue`, `_Component` FROM ADS_AppendRegistry 05:08:43| |CMSI_dbc::WriteTables | Write ADS_ShortCut 05:08:43| |CDeferredIniTable::WriteTable | Write IniFile for section ADS_ShortCut 05:08:43| |CDeferredIniTable::WriteTable | Query: SELECT `Shortcut`, `Directory_`, `Name`, `Component_`, `Target`, `Arguments`, `Description`, `Hotkey`, `Icon_`, `IconIndex`, `ShowCmd`, `WkDir` FROM ADS_Shortcut ORDER BY `Shortcut` 05:08:43| |CMSI_dbc::WriteTables | END WriteTables 05:08:43| |_Comp_BeforeDataMove | Read Property OVERINSTALL: is empty! 05:08:43| |compsetup_fct::TestOverWrite | TestOverWrite... 05:08:43| |compsetup_fct::TestOverWrite | Read Property COMMONDIR: C:\Program Files\Common Files\Siemens\ 05:08:43| |compsetup_fct::TestOverWrite | Read Property SHORTNAME: S7DOS64 05:08:43| |compsetup_fct::TestOverWrite | Read Property SHRCOMPCLIENT: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:08:43| |compsetup_fct::TestOverWrite | Read Property RELEASE: 09.03.04.00_01.01.00.37 05:08:43| |compsetup_fct::TestOverWrite | Read Property USECOMMONDIR: TRUE 05:08:43| |compsetup_fct::TestOverWrite | Read Property BASEDIR: C:\Program Files\Common Files\Siemens\ 05:08:43| |compsetup_fct::TestOverWrite | Read Property SETUP64: YES 05:08:43| |compsetup_fct::TestOverWrite | Read Property ADSCOMMANDLINE: is empty! 05:08:43| |compsetup_fct::TestOverWrite | Read Property INST_RELEASE: is empty! 05:08:43| |compsetup_fct::TestOverWrite |--- Test if Shared Component setup is new installation, overinstallation, update, install for new client 05:08:43| |IsComponentInstalled | IsComponentInstalled... 05:08:43| |IsComponentInstalled | Read Property SHORTNAME: S7DOS64 05:08:43| |IsComponentInstalled | Read Property RELEASE: 09.03.04.00_01.01.00.37 05:08:43| |Check_CompKey | RegOpenKeyEx ReturnValue= 2 05:08:43| |Check_CompKey | RegistryKey not found at HKLM\SOFTWARE\Siemens\Shared Tools\S7DOS64 05:08:43| |IsComponentInstalled | Component not installed 05:08:43| |IsComponentInstalled | END IsComponentInstalled 05:08:43| |IsComponentForClientInstalled | IsComponentForClientInstalled... 05:08:43| |IsComponentForClientInstalled | Read Property SHORTNAME: S7DOS64 05:08:43| |IsComponentForClientInstalled | Read Property SETUP64: YES 05:08:43| |ReadReg_CompKey | RegOpenKeyEx failed: cannot read Release from HKLM\SOFTWARE\Siemens\Shared Tools\S7DOS64 ReturnValue= 2 05:08:43| |IsComponentForClientInstalled | Component-Setup not registered 05:08:43| |compsetup_fct::TestOverWrite | How to install component: 05:08:43| |compsetup_fct::TestOverWrite | New installation! No 'CLIENTS' key has existed; OK. 05:08:43| |compsetup_fct::TestOverWrite | END TestOverWrite ReturnValue= 0 05:08:43| |StartAppl | ======================== 05:08:43| |StartAppl | BEGIN StartAppl... 05:08:43| |StartAppl | ======================== 05:08:43| |StartAppl | ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ 05:08:43| |StartAppl | Appl1= [System64Folder]taskkill.exe 05:08:43| |StartAppl | NoWait1 = 05:08:43| |StartAppl | Application path: C:\Windows\system32\taskkill.exe 05:08:43| |StartAppl | WDir1= [System64Folder] 05:08:43| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:43| |StartAppl | Application found: C:\Windows\system32\taskkill.exe 05:08:43| |StartAppl | Param1= /F /IM pniomgr.exe /T 05:08:43| |StartAppl | Start Application silent: C:\Windows\system32\taskkill.exe with parameter: /F /IM pniomgr.exe /T 05:08:43| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:43| |::LaunchAppGetExitCode | Command: C:\Windows\system32\taskkill.exe 05:08:43| |::LaunchAppGetExitCode | Parameters: /F /IM pniomgr.exe /T 05:08:43| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:43| |::LaunchAppGetExitCode | Silent: 1 05:08:43| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:43| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:43| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:43| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 128 05:08:43| |StartAppl | Elapsed time= 0,1 seconds 05:08:43| |StartAppl | Successfully started: C:\Windows\system32\taskkill.exe /F /IM pniomgr.exe /T ReturnValue=128 05:08:43| | | 05:08:43| |StartAppl | Appl2= [System64Folder]taskkill.exe 05:08:43| |StartAppl | NoWait2 = 05:08:43| |StartAppl | Application path: C:\Windows\system32\taskkill.exe 05:08:43| |StartAppl | WDir2= [System64Folder] 05:08:43| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:43| |StartAppl | Application found: C:\Windows\system32\taskkill.exe 05:08:43| |StartAppl | Param2= /F /IM s7otbxsx64.exe /T 05:08:43| |StartAppl | Start Application silent: C:\Windows\system32\taskkill.exe with parameter: /F /IM s7otbxsx64.exe /T 05:08:43| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:43| |::LaunchAppGetExitCode | Command: C:\Windows\system32\taskkill.exe 05:08:43| |::LaunchAppGetExitCode | Parameters: /F /IM s7otbxsx64.exe /T 05:08:43| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:43| |::LaunchAppGetExitCode | Silent: 1 05:08:43| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:43| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:44| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:44| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 128 05:08:44| |StartAppl | Elapsed time= 0,1 seconds 05:08:44| |StartAppl | Successfully started: C:\Windows\system32\taskkill.exe /F /IM s7otbxsx64.exe /T ReturnValue=128 05:08:44| | | 05:08:44| |StartAppl | Appl3= [System64Folder]taskkill.exe 05:08:44| |StartAppl | NoWait3 = 05:08:44| |StartAppl | Application path: C:\Windows\system32\taskkill.exe 05:08:44| |StartAppl | WDir3= [System64Folder] 05:08:44| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:44| |StartAppl | Application found: C:\Windows\system32\taskkill.exe 05:08:44| |StartAppl | Param3= /F /IM simnetpnpman.exe /T 05:08:44| |StartAppl | Start Application silent: C:\Windows\system32\taskkill.exe with parameter: /F /IM simnetpnpman.exe /T 05:08:44| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:44| |::LaunchAppGetExitCode | Command: C:\Windows\system32\taskkill.exe 05:08:44| |::LaunchAppGetExitCode | Parameters: /F /IM simnetpnpman.exe /T 05:08:44| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:44| |::LaunchAppGetExitCode | Silent: 1 05:08:44| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:44| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:44| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:44| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 128 05:08:44| |StartAppl | Elapsed time= 0,1 seconds 05:08:44| |StartAppl | Successfully started: C:\Windows\system32\taskkill.exe /F /IM simnetpnpman.exe /T ReturnValue=128 05:08:44| | | 05:08:44| |StartAppl | Appl4= [System64Folder]taskkill.exe 05:08:44| |StartAppl | NoWait4 = 05:08:44| |StartAppl | Application path: C:\Windows\system32\taskkill.exe 05:08:44| |StartAppl | WDir4= [System64Folder] 05:08:44| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:44| |StartAppl | Application found: C:\Windows\system32\taskkill.exe 05:08:44| |StartAppl | Param4= /F /IM s7oPNDiscoveryx64.exe 05:08:44| |StartAppl | Start Application silent: C:\Windows\system32\taskkill.exe with parameter: /F /IM s7oPNDiscoveryx64.exe 05:08:44| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:44| |::LaunchAppGetExitCode | Command: C:\Windows\system32\taskkill.exe 05:08:44| |::LaunchAppGetExitCode | Parameters: /F /IM s7oPNDiscoveryx64.exe 05:08:44| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:44| |::LaunchAppGetExitCode | Silent: 1 05:08:44| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:44| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:44| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:44| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 128 05:08:44| |StartAppl | Elapsed time= 0,1 seconds 05:08:44| |StartAppl | Successfully started: C:\Windows\system32\taskkill.exe /F /IM s7oPNDiscoveryx64.exe ReturnValue=128 05:08:44| | | 05:08:44| |StartAppl | Appl5= [System64Folder]taskkill.exe 05:08:44| |StartAppl | NoWait5 = 05:08:44| |StartAppl | Application path: C:\Windows\system32\taskkill.exe 05:08:44| |StartAppl | WDir5= [System64Folder] 05:08:44| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:44| |StartAppl | Application found: C:\Windows\system32\taskkill.exe 05:08:44| |StartAppl | Param5= /F /IM CloudConfigurator.exe 05:08:44| |StartAppl | Start Application silent: C:\Windows\system32\taskkill.exe with parameter: /F /IM CloudConfigurator.exe 05:08:44| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:44| |::LaunchAppGetExitCode | Command: C:\Windows\system32\taskkill.exe 05:08:44| |::LaunchAppGetExitCode | Parameters: /F /IM CloudConfigurator.exe 05:08:44| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:44| |::LaunchAppGetExitCode | Silent: 1 05:08:44| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:44| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:44| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:44| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 128 05:08:44| |StartAppl | Elapsed time= 0,1 seconds 05:08:44| |StartAppl | Successfully started: C:\Windows\system32\taskkill.exe /F /IM CloudConfigurator.exe ReturnValue=128 05:08:44| | | 05:08:44| |StartAppl | Appl6= [System64Folder]NET.EXE 05:08:44| |StartAppl | NoWait6 = 05:08:44| |StartAppl | Application path: C:\Windows\system32\NET.EXE 05:08:44| |StartAppl | WDir6= [System64Folder] 05:08:44| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:44| |StartAppl | Application found: C:\Windows\system32\NET.EXE 05:08:44| |StartAppl | Param6= STOP "S7DOS SCP Remote" 05:08:44| |StartAppl | Start Application silent: C:\Windows\system32\NET.EXE with parameter: STOP "S7DOS SCP Remote" 05:08:44| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:44| |::LaunchAppGetExitCode | Command: C:\Windows\system32\NET.EXE 05:08:44| |::LaunchAppGetExitCode | Parameters: STOP "S7DOS SCP Remote" 05:08:44| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:44| |::LaunchAppGetExitCode | Silent: 1 05:08:44| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:44| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:44| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:44| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 2 05:08:44| |StartAppl | Elapsed time= 0,1 seconds 05:08:44| |StartAppl | Successfully started: C:\Windows\system32\NET.EXE STOP "S7DOS SCP Remote" ReturnValue=2 05:08:44| | | 05:08:44| |StartAppl | Appl7= [System64Folder]NET.EXE 05:08:44| |StartAppl | NoWait7 = 05:08:44| |StartAppl | Application path: C:\Windows\system32\NET.EXE 05:08:44| |StartAppl | WDir7= [System64Folder] 05:08:44| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:44| |StartAppl | Application found: C:\Windows\system32\NET.EXE 05:08:44| |StartAppl | Param7= STOP "SIMATIC PnDiscovery Service" 05:08:44| |StartAppl | Start Application silent: C:\Windows\system32\NET.EXE with parameter: STOP "SIMATIC PnDiscovery Service" 05:08:44| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:44| |::LaunchAppGetExitCode | Command: C:\Windows\system32\NET.EXE 05:08:44| |::LaunchAppGetExitCode | Parameters: STOP "SIMATIC PnDiscovery Service" 05:08:44| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:44| |::LaunchAppGetExitCode | Silent: 1 05:08:44| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:44| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:44| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:44| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 2 05:08:44| |StartAppl | Elapsed time= 0,1 seconds 05:08:44| |StartAppl | Successfully started: C:\Windows\system32\NET.EXE STOP "SIMATIC PnDiscovery Service" ReturnValue=2 05:08:44| | | 05:08:44| |StartAppl | Appl8= [System64Folder]NET.EXE 05:08:44| |StartAppl | NoWait8 = 05:08:44| |StartAppl | Application path: C:\Windows\system32\NET.EXE 05:08:44| |StartAppl | WDir8= [System64Folder] 05:08:44| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:44| |StartAppl | Application found: C:\Windows\system32\NET.EXE 05:08:44| |StartAppl | Param8= STOP "SIMATIC Trace Service" 05:08:44| |StartAppl | Start Application silent: C:\Windows\system32\NET.EXE with parameter: STOP "SIMATIC Trace Service" 05:08:44| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:44| |::LaunchAppGetExitCode | Command: C:\Windows\system32\NET.EXE 05:08:44| |::LaunchAppGetExitCode | Parameters: STOP "SIMATIC Trace Service" 05:08:44| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:44| |::LaunchAppGetExitCode | Silent: 1 05:08:44| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:44| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:44| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:44| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 2 05:08:44| |StartAppl | Elapsed time= 0,1 seconds 05:08:44| |StartAppl | Successfully started: C:\Windows\system32\NET.EXE STOP "SIMATIC Trace Service" ReturnValue=2 05:08:44| | | 05:08:44| |StartAppl | Appl9= [System64Folder]NET.EXE 05:08:44| |StartAppl | NoWait9 = 05:08:44| |StartAppl | Application path: C:\Windows\system32\NET.EXE 05:08:44| |StartAppl | WDir9= [System64Folder] 05:08:44| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:44| |StartAppl | Application found: C:\Windows\system32\NET.EXE 05:08:44| |StartAppl | Param9= STOP "S7DOS Help Service" 05:08:44| |StartAppl | Start Application silent: C:\Windows\system32\NET.EXE with parameter: STOP "S7DOS Help Service" 05:08:44| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:44| |::LaunchAppGetExitCode | Command: C:\Windows\system32\NET.EXE 05:08:44| |::LaunchAppGetExitCode | Parameters: STOP "S7DOS Help Service" 05:08:44| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:44| |::LaunchAppGetExitCode | Silent: 1 05:08:44| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:44| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:44| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:44| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 2 05:08:44| |StartAppl | Elapsed time= 0,1 seconds 05:08:44| |StartAppl | Successfully started: C:\Windows\system32\NET.EXE STOP "S7DOS Help Service" ReturnValue=2 05:08:44| | | 05:08:44| |StartAppl | Appl10= [System64Folder]NET.EXE 05:08:44| |StartAppl | NoWait10 = 05:08:44| |StartAppl | Application path: C:\Windows\system32\NET.EXE 05:08:44| |StartAppl | WDir10= [System64Folder] 05:08:44| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:44| |StartAppl | Application found: C:\Windows\system32\NET.EXE 05:08:44| |StartAppl | Param10= STOP "TraceConceptX" 05:08:44| |StartAppl | Start Application silent: C:\Windows\system32\NET.EXE with parameter: STOP "TraceConceptX" 05:08:44| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:44| |::LaunchAppGetExitCode | Command: C:\Windows\system32\NET.EXE 05:08:44| |::LaunchAppGetExitCode | Parameters: STOP "TraceConceptX" 05:08:44| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:44| |::LaunchAppGetExitCode | Silent: 1 05:08:44| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:44| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:45| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:45| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 2 05:08:45| |StartAppl | Elapsed time= 0,2 seconds 05:08:45| |StartAppl | Successfully started: C:\Windows\system32\NET.EXE STOP "TraceConceptX" ReturnValue=2 05:08:45| | | 05:08:45| |StartAppl | Appl11= [System64Folder]taskkill.exe 05:08:45| |StartAppl | NoWait11 = 05:08:45| |StartAppl | Application path: C:\Windows\system32\taskkill.exe 05:08:45| |StartAppl | WDir11= [System64Folder] 05:08:45| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:45| |StartAppl | Application found: C:\Windows\system32\taskkill.exe 05:08:45| |StartAppl | Param11= /F /IM s7epasrv64x.exe 05:08:45| |StartAppl | Start Application silent: C:\Windows\system32\taskkill.exe with parameter: /F /IM s7epasrv64x.exe 05:08:45| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:45| |::LaunchAppGetExitCode | Command: C:\Windows\system32\taskkill.exe 05:08:45| |::LaunchAppGetExitCode | Parameters: /F /IM s7epasrv64x.exe 05:08:45| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:45| |::LaunchAppGetExitCode | Silent: 1 05:08:45| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:45| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:45| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:45| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 128 05:08:45| |StartAppl | Elapsed time= 0,1 seconds 05:08:45| |StartAppl | Successfully started: C:\Windows\system32\taskkill.exe /F /IM s7epasrv64x.exe ReturnValue=128 05:08:45| | | 05:08:45| |StartAppl | Appl12= 05:08:45| |StartAppl | END StartAppl ReturnValue=0 05:08:45| |_Comp_BeforeDataMove |CA: END _Comp_BeforeDataMove 05:08:46| | | 05:08:46| |_SetAttributesBefore |CA: START _SetAttributesBefore 05:08:46| |CSetAttributes::SetAttributes | SetAttributes... 05:08:46| |CSetAttributes::SetAttributes | Load ADS_Tables.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ADS_Tables.ini 05:08:46| |CSetAttributes::SetAttributes | Set attributes from table SetAttributesBefore 05:08:46| |CSetAttributes::SetAttributes | END SetAttributes 05:08:46| |_SetAttributesBefore |CA: END _SetAttributesBefore 05:08:49| | | 05:08:49| |_CreateLanguageShortcut |CA: START _CreateLanguageShortcut 05:08:49| |CShortcut::CShortcut | If possible use the global Startmenu language by the registry: 1033 05:08:49| |CShortcut::CShortcut | read Property LANG_AV_PRODUCT: 1031;1033;1036;1034;1040;1041;2052 05:08:49| |CShortcut::CShortcut | Startmenu language used for shortcuts: 1033 05:08:49| |CShortcut::CShortcut | Load ADS_Tables.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ADS_Tables.ini 05:08:49| |CShortcut::CShortcut | Load ADSStrings.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ADSStrings.ini 05:08:49| |WriteReg_CompSetup | Set Registry StartMenuLang= 1033 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:08:49| |_CreateLanguageShortcut | Set Property GLOBAL_STARTMENULANGUAGE to 1033 05:08:49| |CShortcut::Create | Create ShortCuts... 05:08:49| |CShortcut::ReadFromIniFile | Read shortcut properties from inifile: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ADS_Tables.ini 05:08:49| |ReadReg_CompSetup | cannot read Registry MSIProperties from HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup ReturnValue= 2 05:08:49| |_CreateLanguageShortcut |CA: END _CreateLanguageShortcut 05:08:49| | | 05:08:49| |_AppendRegistryValues |CA: START _AppendRegistryValues 05:08:49| |CAppendRegistry::WriteRemoveVal | Load ADS_Tables.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ADS_Tables.ini 05:08:49| |CAppendRegistry::WriteRemoveVal | Read section AppendRegistry 05:08:49| |CAppendRegistry::WriteRemoveVal | no entries found; do nothing 05:08:49| |_AppendRegistryValues |CA: END _AppendRegistryValues Returncode=0 05:08:50| | | 05:08:50| |_SetAttributesAfter |CA: START _SetAttributesAfter 05:08:50| |CSetAttributes::SetAttributes | SetAttributes... 05:08:50| |CSetAttributes::SetAttributes | Load ADS_Tables.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ADS_Tables.ini 05:08:50| |CSetAttributes::SetAttributes | Set attributes from table SetAttributesAfter 05:08:50| |CSetAttributes::SetAttributes | END SetAttributes 05:08:50| |_SetAttributesAfter |CA: END _SetAttributesAfter 05:08:50| | | 05:08:50| |_sec_createuser_group |CA: START _sec_createuser_group (Create Users and Groups) 05:08:50| |CPropIni::CreateUserGroup | Create Groups MaxCount: 05:08:50| | |CA: END _sec_createuser_group 05:08:50| | | 05:08:50| |_sec_attachuser |CA: START _sec_attachuser (Attach Users to Groups) 05:08:50| |CPropIni::AttachUser | Attach Users to groups MaxCount: 05:08:50| | |CA: END _sec_attachuser 05:08:50| | | 05:08:50| |_ads_copyfiles |CA: START _ads_copyfiles 05:08:50| |_ads_copyfiles | Read Property SUPPORTDIR: is empty! 05:08:50| |_ads_copyfiles | Read Property REINSTALLMODE: is empty! 05:08:50| |_ads_copyfiles | CopyLockedFiles (RenameFilesAtReboot): Stream out: \CopyFiles.ini 05:08:50| |CMSI_dbc::StreamFromBinary | StreamOut file: ADSCopyFiles desdination: \CopyFiles.ini 05:08:50| |CMSI_dbc::StreamFromBinary | StreamOut ReturnValueerror= -4 05:08:50| |CMSI_dbc::StreamFromBinary | CopyLockedFiles (RenameFilesAtReboot): No files listed. 05:08:50| |_ads_copyfiles | CopyLockedFiles (RenameFilesAtReboot): No files listed. 05:08:50| |_ads_copyfiles |CA: END _ads_copyfiles 05:08:50| | | 05:08:50| |_sec_changepermissions |CA: START _sec_changepermissions (Change Permissions) 05:08:50| |CPropIni::SecChangePermissions | Change Permissions in registry MaxCount: 05:08:50| |CPropIni::SecChangePermissions | Change Permissions on folders MaxCount: 05:08:50| | |CA: END _sec_changepermissions 05:08:51| | | 05:08:51| |_ADS_WriteRegistryValues |CA: START _ADS_WriteRegistryValues 05:08:51| |_ADS_WriteRegistryValues | Read Property ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ 05:08:51| |_ADS_WriteRegistryValues | create Directory for IniFile: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ 05:08:51| |_ADS_WriteRegistryValues | Streamout MBRegEntries.ini to: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\MBRegEntries.ini 05:08:51| |CMSI_dbc::StreamFromBinary | StreamOut file: MBRegEntries desdination: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\MBRegEntries.ini 05:08:51| |CMSI_dbc::StreamFromBinary | StreamOut ReturnValueerror= -4 05:08:51| |CMSI_dbc::StreamFromBinary | CopyLockedFiles (RenameFilesAtReboot): No files listed. 05:08:51| |_ADS_WriteRegistryValues |CA: END _ADS_WriteRegistryValues 05:08:51| | | 05:08:51| |_Comp_AfterDataMove |CA: START _Comp_AfterDataMove 05:08:51| |_Comp_AfterDataMove | Read Property SETUP64: YES 05:08:51| |StartAppl | ======================== 05:08:51| |StartAppl | BEGIN StartApplAfter... 05:08:51| |StartAppl | ======================== 05:08:51| |StartAppl | ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ 05:08:51| |StartAppl | Appl1= [CommonFiles64Folder]Siemens\SimNetCom\TraceConceptX.exe 05:08:51| |StartAppl | NoWait1 = 05:08:51| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\SimNetCom\TraceConceptX.exe 05:08:51| |StartAppl | WDir1= [CommonFiles64Folder]Siemens\SimNetCom 05:08:51| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\SimNetCom 05:08:51| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\SimNetCom\TraceConceptX.exe 05:08:51| |StartAppl | Param1= -service 05:08:51| |StartAppl | Start Application silent: C:\Program Files\Common Files\Siemens\SimNetCom\TraceConceptX.exe with parameter: -service 05:08:51| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:51| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\SimNetCom\TraceConceptX.exe 05:08:51| |::LaunchAppGetExitCode | Parameters: -service 05:08:51| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\SimNetCom 05:08:51| |::LaunchAppGetExitCode | Silent: 1 05:08:51| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:51| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:51| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:51| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:08:51| |StartAppl | Elapsed time= 0,1 seconds 05:08:51| |StartAppl | Successfully started silent: C:\Program Files\Common Files\Siemens\SimNetCom\TraceConceptX.exe -service ReturnValue=0 05:08:51| | | 05:08:51| |StartAppl | Appl2= [COMMONDIR]Automation\TraceEngine\bin\S7TraceService64X.exe 05:08:51| |StartAppl | NoWait2 = 05:08:51| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\TraceEngine\bin\S7TraceService64X.exe 05:08:51| |StartAppl | WDir2= [COMMONDIR]Automation\TraceEngine\bin 05:08:51| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\TraceEngine\bin 05:08:51| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\TraceEngine\bin\S7TraceService64X.exe 05:08:51| |StartAppl | Param2= -service 05:08:51| |StartAppl | Start Application silent: C:\Program Files\Common Files\Siemens\Automation\TraceEngine\bin\S7TraceService64X.exe with parameter: -service 05:08:51| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:51| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\TraceEngine\bin\S7TraceService64X.exe 05:08:51| |::LaunchAppGetExitCode | Parameters: -service 05:08:51| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\TraceEngine\bin 05:08:51| |::LaunchAppGetExitCode | Silent: 1 05:08:51| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:51| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:51| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:51| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:08:51| |StartAppl | Elapsed time= 0,2 seconds 05:08:51| |StartAppl | Successfully started silent: C:\Program Files\Common Files\Siemens\Automation\TraceEngine\bin\S7TraceService64X.exe -service ReturnValue=0 05:08:51| | | 05:08:51| |StartAppl | Appl3= [System64Folder]NET.EXE 05:08:51| |StartAppl | NoWait3 = 05:08:51| |StartAppl | Application path: C:\Windows\system32\NET.EXE 05:08:51| |StartAppl | Application found: C:\Windows\system32\NET.EXE 05:08:51| |StartAppl | Param3= START S7TraceServiceX 05:08:51| |StartAppl | Start Application silent: C:\Windows\system32\NET.EXE with parameter: START S7TraceServiceX 05:08:51| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:51| |::LaunchAppGetExitCode | Command: C:\Windows\system32\NET.EXE 05:08:51| |::LaunchAppGetExitCode | Parameters: START S7TraceServiceX 05:08:51| |::LaunchAppGetExitCode | Silent: 1 05:08:51| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:51| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:54| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:54| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:08:54| |StartAppl | Elapsed time= 2,6 seconds 05:08:54| |StartAppl | Successfully started silent: C:\Windows\system32\NET.EXE START S7TraceServiceX ReturnValue=0 05:08:54| | | 05:08:54| |StartAppl | Appl4= [System64Folder]NET.EXE 05:08:54| |StartAppl | NoWait4 = 05:08:54| |StartAppl | Application path: C:\Windows\system32\NET.EXE 05:08:54| |StartAppl | WDir4= [System64Folder] 05:08:54| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:54| |StartAppl | Application found: C:\Windows\system32\NET.EXE 05:08:54| |StartAppl | Param4= STOP "PROFINET IO RT-Protocol V2.0" 05:08:54| |StartAppl | Start Application silent: C:\Windows\system32\NET.EXE with parameter: STOP "PROFINET IO RT-Protocol V2.0" 05:08:54| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:54| |::LaunchAppGetExitCode | Command: C:\Windows\system32\NET.EXE 05:08:54| |::LaunchAppGetExitCode | Parameters: STOP "PROFINET IO RT-Protocol V2.0" 05:08:54| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:54| |::LaunchAppGetExitCode | Silent: 1 05:08:54| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:54| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:54| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:54| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 2 05:08:54| |StartAppl | Elapsed time= 0,1 seconds 05:08:54| |StartAppl | Successfully started: C:\Windows\system32\NET.EXE STOP "PROFINET IO RT-Protocol V2.0" ReturnValue=2 05:08:54| | | 05:08:54| |StartAppl | Appl5= [System64Folder]NET.EXE 05:08:54| |StartAppl | NoWait5 = 05:08:54| |StartAppl | Application path: C:\Windows\system32\NET.EXE 05:08:54| |StartAppl | WDir5= [System64Folder] 05:08:54| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:54| |StartAppl | Application found: C:\Windows\system32\NET.EXE 05:08:54| |StartAppl | Param5= STOP "SIMATIC Industrial Ethernet (ISO)" 05:08:54| |StartAppl | Start Application silent: C:\Windows\system32\NET.EXE with parameter: STOP "SIMATIC Industrial Ethernet (ISO)" 05:08:54| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:54| |::LaunchAppGetExitCode | Command: C:\Windows\system32\NET.EXE 05:08:54| |::LaunchAppGetExitCode | Parameters: STOP "SIMATIC Industrial Ethernet (ISO)" 05:08:54| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:54| |::LaunchAppGetExitCode | Silent: 1 05:08:54| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:54| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:54| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:54| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 2 05:08:54| |StartAppl | Elapsed time= 0,1 seconds 05:08:54| |StartAppl | Successfully started: C:\Windows\system32\NET.EXE STOP "SIMATIC Industrial Ethernet (ISO)" ReturnValue=2 05:08:54| | | 05:08:54| |StartAppl | Appl6= [System64Folder]netcfg.EXE 05:08:54| |StartAppl | NoWait6 = 05:08:54| |StartAppl | Application path: C:\Windows\system32\netcfg.EXE 05:08:54| |StartAppl | WDir6= [System64Folder] 05:08:54| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:54| |StartAppl | Application found: C:\Windows\system32\netcfg.EXE 05:08:54| |StartAppl | Param6= -u Siem_ISOTrans 05:08:54| |StartAppl | Start Application silent: C:\Windows\system32\netcfg.EXE with parameter: -u Siem_ISOTrans 05:08:54| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:54| |::LaunchAppGetExitCode | Command: C:\Windows\system32\netcfg.EXE 05:08:54| |::LaunchAppGetExitCode | Parameters: -u Siem_ISOTrans 05:08:54| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:54| |::LaunchAppGetExitCode | Silent: 1 05:08:54| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:54| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:54| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:54| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:08:54| |StartAppl | Elapsed time= 0,1 seconds 05:08:54| |StartAppl | Successfully started silent: C:\Windows\system32\netcfg.EXE -u Siem_ISOTrans ReturnValue=0 05:08:54| | | 05:08:54| |StartAppl | Appl7= [System64Folder]netcfg.EXE 05:08:54| |StartAppl | NoWait7 = 05:08:54| |StartAppl | Application path: C:\Windows\system32\netcfg.EXE 05:08:54| |StartAppl | WDir7= [System64Folder] 05:08:54| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:54| |StartAppl | Application found: C:\Windows\system32\netcfg.EXE 05:08:54| |StartAppl | Param7= -u SI_SNPNIO 05:08:54| |StartAppl | Start Application silent: C:\Windows\system32\netcfg.EXE with parameter: -u SI_SNPNIO 05:08:54| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:54| |::LaunchAppGetExitCode | Command: C:\Windows\system32\netcfg.EXE 05:08:54| |::LaunchAppGetExitCode | Parameters: -u SI_SNPNIO 05:08:54| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:54| |::LaunchAppGetExitCode | Silent: 1 05:08:54| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:54| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:54| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:54| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:08:54| |StartAppl | Elapsed time= 0,2 seconds 05:08:54| |StartAppl | Successfully started silent: C:\Windows\system32\netcfg.EXE -u SI_SNPNIO ReturnValue=0 05:08:54| | | 05:08:54| |StartAppl | Appl8= [System64Folder]netcfg.EXE 05:08:54| |StartAppl | NoWait8 = 05:08:54| |StartAppl | Application path: C:\Windows\system32\netcfg.EXE 05:08:54| |StartAppl | WDir8= [System64Folder] 05:08:54| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:54| |StartAppl | Application found: C:\Windows\system32\netcfg.EXE 05:08:54| |StartAppl | Param8= -u s7sn2srtx 05:08:54| |StartAppl | Start Application silent: C:\Windows\system32\netcfg.EXE with parameter: -u s7sn2srtx 05:08:54| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:54| |::LaunchAppGetExitCode | Command: C:\Windows\system32\netcfg.EXE 05:08:54| |::LaunchAppGetExitCode | Parameters: -u s7sn2srtx 05:08:54| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:54| |::LaunchAppGetExitCode | Silent: 1 05:08:54| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:54| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:54| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:54| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:08:54| |StartAppl | Elapsed time= 0,1 seconds 05:08:54| |StartAppl | Successfully started silent: C:\Windows\system32\netcfg.EXE -u s7sn2srtx ReturnValue=0 05:08:54| | | 05:08:54| |StartAppl | Appl9= [System64Folder]netcfg.EXE 05:08:54| |StartAppl | NoWait9 = 05:08:54| |StartAppl | Application path: C:\Windows\system32\netcfg.EXE 05:08:54| |StartAppl | WDir9= [System64Folder] 05:08:54| |StartAppl | Change WorkingDir to: C:\Windows\system32\ 05:08:54| |StartAppl | Application found: C:\Windows\system32\netcfg.EXE 05:08:54| |StartAppl | Param9= -u s7PnDiscoveryDriver 05:08:54| |StartAppl | Start Application silent: C:\Windows\system32\netcfg.EXE with parameter: -u s7PnDiscoveryDriver 05:08:54| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:54| |::LaunchAppGetExitCode | Command: C:\Windows\system32\netcfg.EXE 05:08:54| |::LaunchAppGetExitCode | Parameters: -u s7PnDiscoveryDriver 05:08:54| |::LaunchAppGetExitCode | StartDir: C:\Windows\system32\ 05:08:54| |::LaunchAppGetExitCode | Silent: 1 05:08:54| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:54| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:55| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:55| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:08:55| |StartAppl | Elapsed time= 0,1 seconds 05:08:55| |StartAppl | Successfully started silent: C:\Windows\system32\netcfg.EXE -u s7PnDiscoveryDriver ReturnValue=0 05:08:55| | | 05:08:55| |StartAppl | Appl10= [COMMONDIR]Automation\Simatic OAM\bin\s7oiehsx64.exe 05:08:55| |StartAppl | NoWait10 = 05:08:55| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe 05:08:55| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe 05:08:55| |StartAppl | Param10= -Service 05:08:55| |StartAppl | Start Application: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe with parameter: -Service 05:08:55| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:55| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe 05:08:55| |::LaunchAppGetExitCode | Parameters: -Service 05:08:55| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:55| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:55| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:55| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:08:55| |StartAppl | Elapsed time= 0,1 seconds 05:08:55| |StartAppl | Successfully started: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe -Service ReturnValue=0 05:08:55| | | 05:08:55| |StartAppl | Appl11= [COMMONDIR]Automation\Simatic OAM\bin\s7oiehsx64.exe 05:08:55| |StartAppl | NoWait11 = 05:08:55| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe 05:08:55| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe 05:08:55| |StartAppl | Param11= -Start 05:08:55| |StartAppl | Start Application: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe with parameter: -Start 05:08:55| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:55| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe 05:08:55| |::LaunchAppGetExitCode | Parameters: -Start 05:08:55| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:55| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:55| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:55| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:08:55| |StartAppl | Elapsed time= 0,2 seconds 05:08:55| |StartAppl | Successfully started: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe -Start ReturnValue=0 05:08:55| | | 05:08:55| |StartAppl | Appl12= [COMMONDIR]Automation\Simatic OAM\bin\s7oiehsx64.exe 05:08:55| |StartAppl | NoWait12 = 05:08:55| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe 05:08:55| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe 05:08:55| |StartAppl | Param12= -GetState 05:08:55| |StartAppl | Start Application: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe with parameter: -GetState 05:08:55| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:55| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe 05:08:55| |::LaunchAppGetExitCode | Parameters: -GetState 05:08:55| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:55| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:08:55| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:08:55| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 2 05:08:55| |StartAppl | Elapsed time= 0,1 seconds 05:08:55| |StartAppl | Successfully started: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe -GetState ReturnValue=2 05:08:55| | | 05:08:55| |StartAppl | Appl13= [COMMONDIR]Automation\Simatic OAM\Drivers\S7Inst64.exe 05:08:55| |StartAppl | NoWait13 = 05:08:55| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:08:55| |StartAppl | WDir13= [COMMONDIR]Automation\Simatic OAM\Drivers 05:08:55| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:08:55| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:08:55| |StartAppl | Param13= /PnP /Inf "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers" 05:08:55| |StartAppl | Start Application silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe with parameter: /PnP /Inf "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers" 05:08:55| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:08:55| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:08:55| |::LaunchAppGetExitCode | Parameters: /PnP /Inf "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers" 05:08:55| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:08:55| |::LaunchAppGetExitCode | Silent: 1 05:08:55| |::LaunchAppGetExitCodeC | call CreateProcess 05:08:55| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:09:02| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:09:02| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:09:02| |StartAppl | Elapsed time= 6,9 seconds 05:09:02| |StartAppl | Successfully started silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe /PnP /Inf "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers" ReturnValue=0 05:09:02| | | 05:09:02| |StartAppl | Appl14= [System64Folder]netcfg.EXE 05:09:02| |StartAppl | NoWait14 = 05:09:02| |StartAppl | Application path: C:\Windows\system32\netcfg.EXE 05:09:02| |StartAppl | WDir14= [COMMONDIR]Automation\Simatic OAM\NetTrans 05:09:02| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\NetTrans 05:09:02| |StartAppl | Application found: C:\Windows\system32\netcfg.EXE 05:09:02| |StartAppl | Param14= -l snpnio.inf -c p -i SI_SNPNIO 05:09:02| |StartAppl | Start Application silent: C:\Windows\system32\netcfg.EXE with parameter: -l snpnio.inf -c p -i SI_SNPNIO 05:09:02| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:09:02| |::LaunchAppGetExitCode | Command: C:\Windows\system32\netcfg.EXE 05:09:02| |::LaunchAppGetExitCode | Parameters: -l snpnio.inf -c p -i SI_SNPNIO 05:09:02| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\NetTrans 05:09:02| |::LaunchAppGetExitCode | Silent: 1 05:09:02| |::LaunchAppGetExitCodeC | call CreateProcess 05:09:02| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:09:02| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:09:02| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:09:02| |StartAppl | Elapsed time= 0,6 seconds 05:09:02| |StartAppl | Successfully started silent: C:\Windows\system32\netcfg.EXE -l snpnio.inf -c p -i SI_SNPNIO ReturnValue=0 05:09:02| | | 05:09:02| |StartAppl | Appl15= [System64Folder]netcfg.EXE 05:09:02| |StartAppl | NoWait15 = 05:09:02| |StartAppl | Application path: C:\Windows\system32\netcfg.EXE 05:09:02| |StartAppl | WDir15= [COMMONDIR]Automation\Simatic OAM\NetTrans 05:09:02| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\NetTrans 05:09:02| |StartAppl | Application found: C:\Windows\system32\netcfg.EXE 05:09:02| |StartAppl | Param15= -l oemnxpsn_64.inf -c p -i Siem_ISOTrans 05:09:02| |StartAppl | Start Application silent: C:\Windows\system32\netcfg.EXE with parameter: -l oemnxpsn_64.inf -c p -i Siem_ISOTrans 05:09:02| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:09:02| |::LaunchAppGetExitCode | Command: C:\Windows\system32\netcfg.EXE 05:09:02| |::LaunchAppGetExitCode | Parameters: -l oemnxpsn_64.inf -c p -i Siem_ISOTrans 05:09:02| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\NetTrans 05:09:02| |::LaunchAppGetExitCode | Silent: 1 05:09:02| |::LaunchAppGetExitCodeC | call CreateProcess 05:09:02| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:09:03| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:09:03| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:09:03| |StartAppl | Elapsed time= 0,5 seconds 05:09:03| |StartAppl | Successfully started silent: C:\Windows\system32\netcfg.EXE -l oemnxpsn_64.inf -c p -i Siem_ISOTrans ReturnValue=0 05:09:03| | | 05:09:03| |StartAppl | Appl16= [System64Folder]netcfg.EXE 05:09:03| |StartAppl | NoWait16 = 05:09:03| |StartAppl | Application path: C:\Windows\system32\netcfg.EXE 05:09:03| |StartAppl | WDir16= [COMMONDIR]Automation\Simatic OAM\NetTrans 05:09:03| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\NetTrans 05:09:03| |StartAppl | Application found: C:\Windows\system32\netcfg.EXE 05:09:03| |StartAppl | Param16= -l s7PnDiscoveryDriver.inf -c p -i s7PnDiscoveryDriver 05:09:03| |StartAppl | Start Application silent: C:\Windows\system32\netcfg.EXE with parameter: -l s7PnDiscoveryDriver.inf -c p -i s7PnDiscoveryDriver 05:09:03| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:09:03| |::LaunchAppGetExitCode | Command: C:\Windows\system32\netcfg.EXE 05:09:03| |::LaunchAppGetExitCode | Parameters: -l s7PnDiscoveryDriver.inf -c p -i s7PnDiscoveryDriver 05:09:03| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\NetTrans 05:09:03| |::LaunchAppGetExitCode | Silent: 1 05:09:03| |::LaunchAppGetExitCodeC | call CreateProcess 05:09:03| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:09:04| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:09:04| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:09:04| |StartAppl | Elapsed time= 0,6 seconds 05:09:04| |StartAppl | Successfully started silent: C:\Windows\system32\netcfg.EXE -l s7PnDiscoveryDriver.inf -c p -i s7PnDiscoveryDriver ReturnValue=0 05:09:04| | | 05:09:04| |StartAppl | Appl17= [COMMONDIR]Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:04| |StartAppl | Condition17 'NOT(VersionNT=603)' is false 05:09:04| |StartAppl | Application17 was not started 05:09:04| | | 05:09:04| |StartAppl | Appl18= [COMMONDIR]Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:04| |StartAppl | Condition18 'VersionNT=603' is true 05:09:04| |StartAppl | NoWait18 = 05:09:04| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:04| |StartAppl | WDir18= [COMMONDIR]Automation\Simatic OAM\Drivers 05:09:04| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:09:04| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:04| |StartAppl | Param18= /Inf "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\EPROM\s7otmcd4x64.inf" /HardwareID "ACPI\VEN_SIE&DEV_4D34" 05:09:04| |StartAppl | Start Application silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe with parameter: /Inf "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\EPROM\s7otmcd4x64.inf" /HardwareID "ACPI\VEN_SIE&DEV_4D34" 05:09:04| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:09:04| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:04| |::LaunchAppGetExitCode | Parameters: /Inf "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\EPROM\s7otmcd4x64.inf" /HardwareID "ACPI\VEN_SIE&DEV_4D34" 05:09:04| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:09:04| |::LaunchAppGetExitCode | Silent: 1 05:09:04| |::LaunchAppGetExitCodeC | call CreateProcess 05:09:04| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:09:04| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:09:04| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:09:04| |StartAppl | Elapsed time= 0,2 seconds 05:09:04| |StartAppl | Successfully started silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe /Inf "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\EPROM\s7otmcd4x64.inf" /HardwareID "ACPI\VEN_SIE&DEV_4D34" ReturnValue=0 05:09:04| | | 05:09:04| |StartAppl | Appl19= [COMMONDIR]Automation\Simatic OAM\Drivers\install.exe 05:09:04| |StartAppl | NoWait19 = 05:09:04| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\install.exe 05:09:04| |StartAppl | WDir19= [COMMONDIR]Automation\Simatic OAM\Drivers 05:09:04| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:09:04| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\install.exe 05:09:04| |StartAppl | Start Application silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\install.exe with parameter: 05:09:04| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:09:04| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\install.exe 05:09:04| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:09:04| |::LaunchAppGetExitCode | Silent: 1 05:09:04| |::LaunchAppGetExitCodeC | call CreateProcess 05:09:04| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:09:04| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:09:04| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:09:04| |StartAppl | Elapsed time= 0,2 seconds 05:09:04| |StartAppl | Successfully started silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\install.exe ReturnValue=0 05:09:04| | | 05:09:04| |StartAppl | Appl20= [COMMONDIR]Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:04| |StartAppl | NoWait20 = 05:09:04| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:04| |StartAppl | WDir20= [COMMONDIR]Automation\Simatic OAM\Drivers 05:09:04| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:09:04| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:04| |StartAppl | Param20= /addreg 05:09:04| |StartAppl | Start Application silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe with parameter: /addreg 05:09:04| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:09:04| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:04| |::LaunchAppGetExitCode | Parameters: /addreg 05:09:04| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:09:04| |::LaunchAppGetExitCode | Silent: 1 05:09:04| |::LaunchAppGetExitCodeC | call CreateProcess 05:09:04| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:09:05| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:09:05| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:09:05| |StartAppl | Elapsed time= 1,0 seconds 05:09:05| |StartAppl | Successfully started silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe /addreg ReturnValue=0 05:09:05| | | 05:09:05| |StartAppl | Appl21= [COMMONDIR]Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:05| |StartAppl | NoWait21 = 05:09:05| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:05| |StartAppl | WDir21= [COMMONDIR]Automation\Simatic OAM\Drivers 05:09:05| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:09:05| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:05| |StartAppl | Param21= /Inf "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\EPROM\s7otmcd64x.inf" /HardwareID *SIEA093 05:09:05| |StartAppl | Start Application silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe with parameter: /Inf "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\EPROM\s7otmcd64x.inf" /HardwareID *SIEA093 05:09:05| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:09:05| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:05| |::LaunchAppGetExitCode | Parameters: /Inf "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\EPROM\s7otmcd64x.inf" /HardwareID *SIEA093 05:09:05| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:09:05| |::LaunchAppGetExitCode | Silent: 1 05:09:05| |::LaunchAppGetExitCodeC | call CreateProcess 05:09:05| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:09:05| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:09:05| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:09:05| |StartAppl | Elapsed time= 0,4 seconds 05:09:05| |StartAppl | Successfully started silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe /Inf "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\EPROM\s7otmcd64x.inf" /HardwareID *SIEA093 ReturnValue=0 05:09:05| | | 05:09:05| |StartAppl | Appl22= [COMMONDIR]Automation\Simatic OAM\bin\s7epaImp64x.exe 05:09:05| |StartAppl | Condition22 'NOT UPDATEMODE' is true 05:09:05| |StartAppl | NoWait22 = 05:09:05| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7epaImp64x.exe 05:09:05| |StartAppl | WDir22= [COMMONDIR]Automation\Simatic OAM\bin 05:09:05| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin 05:09:05| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7epaImp64x.exe 05:09:05| |StartAppl | Param22= -i -t="C:\Program Files\Common Files\Siemens\Automation\Simatic OAM" -d="C:\ProgramData\Siemens\Automation\Simatic OAM" 05:09:05| |StartAppl | Start Application silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7epaImp64x.exe with parameter: -i -t="C:\Program Files\Common Files\Siemens\Automation\Simatic OAM" -d="C:\ProgramData\Siemens\Automation\Simatic OAM" 05:09:05| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:09:05| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7epaImp64x.exe 05:09:05| |::LaunchAppGetExitCode | Parameters: -i -t="C:\Program Files\Common Files\Siemens\Automation\Simatic OAM" -d="C:\ProgramData\Siemens\Automation\Simatic OAM" 05:09:05| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin 05:09:05| |::LaunchAppGetExitCode | Silent: 1 05:09:05| |::LaunchAppGetExitCodeC | call CreateProcess 05:09:05| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:09:10| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:09:10| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:09:10| |StartAppl | Elapsed time= 5,0 seconds 05:09:10| |StartAppl | Successfully started silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7epaImp64x.exe -i -t="C:\Program Files\Common Files\Siemens\Automation\Simatic OAM" -d="C:\ProgramData\Siemens\Automation\Simatic OAM" ReturnValue=0 05:09:10| | | 05:09:10| |StartAppl | Appl23= [COMMONDIR]Automation\Simatic OAM\bin\s7epaImp64x.exe 05:09:10| |StartAppl | Condition23 'UPDATEMODE' is false 05:09:10| |StartAppl | Application23 was not started 05:09:10| | | 05:09:10| |StartAppl | Appl24= [COMMONDIR]Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:10| |StartAppl | NoWait24 = 05:09:10| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:10| |StartAppl | WDir24= [COMMONDIR]Automation\Simatic OAM\Drivers 05:09:10| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:09:10| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:10| |StartAppl | Param24= /softbus 05:09:10| |StartAppl | Start Application silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe with parameter: /softbus 05:09:10| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:09:10| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:10| |::LaunchAppGetExitCode | Parameters: /softbus 05:09:10| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:09:10| |::LaunchAppGetExitCode | Silent: 1 05:09:10| |::LaunchAppGetExitCodeC | call CreateProcess 05:09:10| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:09:11| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:09:11| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:09:11| |StartAppl | Elapsed time= 0,4 seconds 05:09:11| |StartAppl | Successfully started silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe /softbus ReturnValue=0 05:09:11| | | 05:09:11| |StartAppl | Appl25= [COMMONDIR]Automation\Simatic OAM\bin\s7oPNDiscoveryx64.exe 05:09:11| |StartAppl | NoWait25 = 05:09:11| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oPNDiscoveryx64.exe 05:09:11| |StartAppl | WDir25= [COMMONDIR]Automation\Simatic OAM\bin 05:09:11| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin 05:09:11| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oPNDiscoveryx64.exe 05:09:11| |StartAppl | Param25= -Service 05:09:11| |StartAppl | Start Application silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oPNDiscoveryx64.exe with parameter: -Service 05:09:11| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:09:11| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oPNDiscoveryx64.exe 05:09:11| |::LaunchAppGetExitCode | Parameters: -Service 05:09:11| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin 05:09:11| |::LaunchAppGetExitCode | Silent: 1 05:09:11| |::LaunchAppGetExitCodeC | call CreateProcess 05:09:11| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:09:11| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:09:11| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:09:11| |StartAppl | Elapsed time= 0,1 seconds 05:09:11| |StartAppl | Successfully started silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oPNDiscoveryx64.exe -Service ReturnValue=0 05:09:11| | | 05:09:11| |StartAppl | Appl26= [COMMONDIR]Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:11| |StartAppl | NoWait26 = 05:09:11| |StartAppl | Application path: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:11| |StartAppl | WDir26= [COMMONDIR]Automation\Simatic OAM\Drivers 05:09:11| |StartAppl | Change WorkingDir to: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:09:11| |StartAppl | Application found: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:11| |StartAppl | Param26= /removenettrans 05:09:11| |StartAppl | Start Application silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe with parameter: /removenettrans 05:09:11| |::LaunchAppGetExitCode | LaunchAppGetExitCode Start 05:09:11| |::LaunchAppGetExitCode | Command: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe 05:09:11| |::LaunchAppGetExitCode | Parameters: /removenettrans 05:09:11| |::LaunchAppGetExitCode | StartDir: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers 05:09:11| |::LaunchAppGetExitCode | Silent: 1 05:09:11| |::LaunchAppGetExitCodeC | call CreateProcess 05:09:11| |::LaunchAppGetExitCodeC | TimeOutWaitingForAppl= 20 minutes 05:09:11| |::LaunchAppGetExitCodeC | WaitForSingleObject ReturnValue= 0 05:09:11| |::LaunchAppGetExitCode | END LaunchAppGetExitCode ReturnValue= 0 05:09:11| |StartAppl | Elapsed time= 0,2 seconds 05:09:11| |StartAppl | Successfully started silent: C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\Drivers\S7Inst64.exe /removenettrans ReturnValue=0 05:09:11| | | 05:09:11| |StartAppl | Appl27= 05:09:11| |StartAppl | END StartApplAfter ReturnValue=0 05:09:11| |_Comp_AfterDataMove |CA: _Comp_AfterDataMove END 05:09:11| | | 05:09:11| |_ProcessAfterInst |CA: START _ProcessAfterInst 05:09:11| |CSelfRegister::RegisterFiles | BEGIN RegisterFiles 05:09:11| |CSelfRegister::RegisterFiles | Read Property RebootOnEnd: YES 05:09:11| |CSelfRegister::RegisterFiles | Read Property ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ 05:09:11| |CSelfRegister::RegisterFiles | Read Property SHORTNAME: S7DOS64 05:09:11| |CSelfRegister::RegisterFiles | set 'pending file rename operations' 05:09:11| |CSelfRegister::GetRegSvr32 | Search for RegSvr32.exe 05:09:11| |CSelfRegister::GetRegSvr32 | Read Property COMMONDIR: C:\Program Files\Common Files\Siemens\ 05:09:11| |CSelfRegister::GetRegSvr32 | Look for Regserver in: C:\Program Files\Common Files\Siemens\bin\REGSVR32.EXE 05:09:11| |CSelfRegister::GetRegSvr32 | Look for Regserver in: C:\Windows\system32\REGSVR32.EXE 05:09:11| |CSelfRegister::RegisterFiles | Regserver found: C:\Windows\system32\REGSVR32.EXE 05:09:11| |CSelfRegister::RegisterFiles | END RegisterFiles 05:09:11| |_ProcessAfterInst | Read Property INIINST: C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\Properties.ini 05:09:11| |_ProcessAfterInst | Read Property ADSCOMMANDLINE: is empty! 05:09:11| |_ProcessAfterInst | Read Property SETUP64: YES 05:09:11| |_ProcessAfterInst | Read Property ADS_REG_STARTMENU= NO 05:09:11| |_ProcessAfterInst | Set Property G_REBOOT to TRUE 05:09:11| |_ProcessAfterInst | Set Property ADSREBOOT to YES 05:09:11| |_ProcessAfterInst | The INI-File forces reboot. 05:09:11| |compsetup_fct::UpdateSharedTool | 05:09:11| |compsetup_fct::UpdateSharedTool | UpdateSharedTools... 05:09:11| |compsetup_fct::UpdateSharedTool | Read Property LOGFNAME: 05:09:11| |compsetup_fct::UpdateSharedTool | Read Property AUTINSTLOG: C:\ProgramData\Siemens\Automation\Logfiles\Setup\ 05:09:11| |compsetup_fct::UpdateSharedTool | Read Property ProductName: SIMATIC Device Drivers 05:09:11| |compsetup_fct::UpdateSharedTool | Read Property RegVersion: 9.3 05:09:11| |compsetup_fct::UpdateSharedTool | Read Property RELEASE: 09.03.04.00_01.01.00.37 05:09:11| |compsetup_fct::UpdateSharedTool | Read Property COMPSUCCEEDEDVALUE: 1 05:09:11| |WriteReg_CompKey | Set Client in Registry: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 in HKLM\SOFTWARE\Siemens\Shared Tools\S7DOS64\Clients 05:09:11| |compsetup_fct::UpdateSharedTool | Write Version: 9.3 05:09:11| |compsetup_fct::UpdateSharedTool | Write Release: 09.03.04.00_01.01.00.37 05:09:11| |compsetup_fct::UpdateSharedTool | Display Name: SIMATIC Device Drivers 05:09:11| |compsetup_fct::UpdateSharedTool | Logfilename: C:\ProgramData\Siemens\Automation\Logfiles\Setup\ 05:09:11| | | 05:09:11| |compsetup_fct::GoExit | GoExit...2 05:09:11| |compsetup_fct::GoExit | Read Property LOGFILENAME: C:\ProgramData\Siemens\Automation\Logfiles\Setup\S7DOS64_LOG.TXT 05:09:11| |compsetup_fct::GoExit | Read Property G_REBOOT: TRUE 05:09:11| |compsetup_fct::GoExit | Read Property SHORTNAME: S7DOS64 05:09:11| |compsetup_fct::GoExit | Write result parameters in registry 05:09:11| |WriteReg_CompSetup | Set Registry ComponentEntry= S7DOS64 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:09:11| |WriteReg_CompSetup | Set Registry Restart= 1 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:09:11| |WriteReg_CompSetup | Set Registry LogFile= C:\ProgramData\Siemens\Automation\Logfiles\Setup\S7DOS64_LOG.TXT in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:09:11| |WriteReg_SetupSucceeded | Set Registry SetupSucceeded= 1 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:09:11| |WriteReg_SetupSucceeded | Set Registry SetupSucceeded= 1 in HKLM\SOFTWARE\Siemens\Shared Tools\S7DOS64 05:09:11| |compsetup_fct::GoExit | END GoExit 05:09:11| |compsetup_fct::UpdateSharedTool | END UpdateSharedTools 05:09:11| |_ProcessAfterInst |CA: END _ProcessAfterInst 05:09:11| | | 05:09:12| |_SiemInstGlobal_WriteEnd |CA: START _SiemInstGlobal_WriteEnd 05:09:12| |WriteFeatureToReg | Set Feature-State in Registry... 05:09:12| |WriteFeatureToReg | RK_InstallSW= SOFTWARE\Siemens\Shared Tools\ 05:09:12| |WriteFeatureToReg | Registry Key= SOFTWARE\Siemens\Shared Tools\S7DOS64\InstalledFeatures 05:09:12| |WriteFeatureToReg | Set Feature 'PROGRAM' to registry 05:09:12| |WriteFeatureToReg | Set Feature 'MF_SUPPORT_COMPONENT' to registry 05:09:12| |::SiemInstGlobal_WriteEnd | Set end in Citamis.str... 05:09:12| |::GetLogFileCitamis | Citamis path: C:\ProgramData\Siemens\Automation\Logfiles\Setup\Citamis.str 05:09:12| |::SiemInstGlobal_WriteEnd | Read Property REMOVE: is empty! 05:09:12| |::SiemInstGlobal_WriteEnd | Read Property ONLYCLIENTENTRY: is empty! 05:09:12| |::SiemInstGlobal_WriteEnd | Read Property SHRCOMPCLIENT: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:09:12| |::SiemInstGlobal_WriteEnd | Read Property SHORTNAME: S7DOS64 05:09:12| |::SiemInstGlobal_WriteEnd | Read Property RELEASE: 09.03.04.00_01.01.00.37 05:09:12| |::SiemInstGlobal_WriteEnd | Read Property RegVersion: 9.3 05:09:12| |::WriteTextToCitamis | Write to Citamis: ----> done Shared Component S7DOS64; Release: 09.03.04.00_01.01.00.37; Version: 9.3; 04-23-2025; 05:09:12; (SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9) 05:09:12| |_SiemInstGlobal_WriteEnd | Delete Temp-Files in C:\Users\FikoYT\AppData\Local\Temp\{CCC01ADD-3A54-15D6-92A8-00A0245B3AC6}\ 05:09:12| |_SiemInstGlobal_WriteEnd |CA: END _SiemInstGlobal_WriteEnd 05:09:12| | | 05:09:12| | info |Setup ended with 0 errors and 0 warnings. Reboot required. 05:09:12| | info | elapsed setup time: 0 minutes 31 seconds 05:09:12| | info | application waiting time: 0 minutes 21 seconds 05:09:12| |---- END Component Setup ---- |=> MSI Component Setup end 05:09:12| |Compsetupstarter-Call_exeS |End ShellExecuteEx: MSI-Component-Setup ReturnValue= 0 05:09:12| |Compsetupstarter-LaComForInst |===================================================================================== 05:09:12| |Compsetupstarter-LaComForInst | MSI returncode= 0 (0 = OK) 05:09:12| |Compsetupstarter-GetRegValue | Read SetupSucceeded entry: HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup SetupSucceeded= 1 05:09:12| |Compsetupstarter-LaComForInst | SetupSucceeded= 1 (1 or 2 would be OK) 05:09:12| |Compsetupstarter-LaComForInst | Delete value Client at HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup - compsetup finished 05:09:12| |Compsetupstarter-InitInstance | MSI entry found in Registry: HKLM\Software\Classes\Installer\Products\DDA10CCC45A36D51298A000A42B5A36C 05:09:12| |--- END Component Setup EXE --- | setup64.exe finished 2025-04-23 05:09:12| |=============================== |=====================================================================================