05:10:10| |=============================== |===================================================================================== 05:10:10| | called by Component Setup EXE | Logfile created/appended by Setup EXE 2025-04-23 05:10:10| |=============================== |===================================================================================== 05:10:10| |Compsetupstarter-InitInstance | Setup.exe fileversion: 708.200.101.3 05:10:10| |Compsetupstarter-InitInstance | FullCommandLine: "F:\InstData\PLCSIMADV_SimRT\Media\setup.exe" /s /v"/qn" 05:10:10| |Compsetupstarter-InitInstance | LoggingLevel: 11 05:10:10| |Compsetupstarter-InitInstance | Read from Version.ini 05:10:10| |Compsetupstarter-InitInstance | RegKey= PLCSIMADV_SimRT (Name) 05:10:10| |Compsetupstarter-InitInstance | Name= SIMATIC PLCSIM Advanced SimRT (NameDispl) 05:10:10| |Compsetupstarter-InitInstance | ProductCode= {CCCA66DD-605E-48F4-904A-6496F69C2531} 05:10:10| |Compsetupstarter-InitInstance | UpgradeCode= {DDDA66EE-605E-48F4-904A-6496F69C2531} 05:10:10| |Compsetupstarter-InitInstance | Version= 06.00.0000 05:10:10| |Compsetupstarter-InitInstance | Release= V06.00.00.00_68.01.00.03 05:10:10| |Compsetupstarter-InitInstance | Frame Version= 05:10:10| |Compsetupstarter-InitInstance | found OS: 1000 Build: 19045 Workstation SuiteMask: 256 05:10:10| |Compsetupstarter-TestMSI | MSI Version required: 3.1.4000.1823 installed: 5.0.19041.3636 05:10:10| |Compsetupstarter-TestMSI | DCOM settings O.K. 05:10:10| |Compsetupstarter-TestRegistryRi | TestRegistryRights: HKLM\Software\Siemens\Shared Tools 05:10:10| |Compsetupstarter-TestRegistryRi | TestRegistryRights: HKLM\Software\Siemens\Shared Tools\CompSetup 05:10:10| |Compsetupstarter-TestRegistryRi | TestRegistryRights: HKLM\Software\Siemens\Shared Tools\PLCSIMADV_SimRT 05:10:10| |Compsetupstarter-TestRegistryRi | Registry Key not found at HKLM\Software\Siemens\Shared Tools\PLCSIMADV_SimRT 05:10:10| |Compsetupstarter-TestRegistryRi | TestRegistryRights: HKLM\Software\Siemens\Shared Tools\PLCSIMADV_SimRT\Clients 05:10:10| |Compsetupstarter-TestRegistryRi | Registry Key not found at HKLM\Software\Siemens\Shared Tools\PLCSIMADV_SimRT\Clients 05:10:10| |Compsetupstarter-GetRegValue | Read Client entry: HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup Client= SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:10:10| |Compsetupstarter-ReadAndSetClie | Clientname from registry: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:10:10| |Compsetupstarter-GetRegValue | Read SetupLanguage entry: HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup SetupLanguage= B 05:10:10| |Compsetupstarter-ReadAndSetLang | SetupLanguage chosen: 1033 05:10:10| |Compsetupstarter-TestForMsiMute | Test for Mutex... 05:10:10| |Compsetupstarter-TestForMsiMute | No MSI active (no Mutex existing) 05:10:10| |Compsetupstarter-InitInstance | Stream out from: F:\InstData\PLCSIMADV_SimRT\Media\simatic plcsim advanced simrt.msi 05:10:10| |Compsetupstarter-InitInstance | Stream out to: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\Properties.ini 05:10:10| |Compsetupstarter-InitInstance | TimeOut from Properties.ini: 05:10:10| |Compsetupstarter-InitInstance | TimeOut from Commandline: 05:10:10| |Compsetupstarter-InitInstance | 05:10:10| |Compsetupstarter-InitInstance |Test D e i n s t a l l a t i o n 05:10:10| |Compsetupstarter-TestForMsiMute | Test for Mutex... 05:10:10| |Compsetupstarter-TestForMsiMute | No MSI active (no Mutex existing) 05:10:10| |Compsetupstarter-DeinstOldVersi | DeinstallOldVersion... 05:10:10| |Compsetupstarter-DetMainMsiKey | Determine Mainkey: No HKClassesR key... 05:10:10| |Compsetupstarter-DetMainMsiKey | Determine Mainkey: No HKCUser key.. 05:10:10| |Compsetupstarter-DeinstOldVersi | Full release you want to install: V06.0.0.0_68.01.0.03 05:10:10| |Compsetupstarter-TestIfInstalle | Test if Component Installed... 05:10:10| |Compsetupstarter-TestIfInstalle | MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCCA66DD-605E-48F4-904A-6496F69C2531} 05:10:10| |Compsetupstarter-SearchMSIRest | MSI Setup not found in Registry: HKLM\Software\Classes\Installer\Products\DD66ACCCE5064F8409A446696FC95213 05:10:10| |Compsetupstarter-TestIfInstalle | IsInstalled: 0; MsiCompInstalled: 0 05:10:10| |Compsetupstarter-DeinstOldVersi | Component not installed. No deinstall necessary. 05:10:10| |Compsetupstarter-DeinstOldVersi | END DeinstallOldVersion 05:10:10| |Compsetupstarter-InitInstance | 05:10:10| |Compsetupstarter-InitInstance |Test I n s t a l l a t i o n 05:10:10| |Compsetupstarter-TestForMsiMute | Test for Mutex... 05:10:10| |Compsetupstarter-TestForMsiMute | No MSI active (no Mutex existing) 05:10:10| |Compsetupstarter-Install | Install section... 05:10:10| |Compsetupstarter-TestIfInstalle | Test if Component Installed... 05:10:10| |Compsetupstarter-TestIfInstalle | MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCCA66DD-605E-48F4-904A-6496F69C2531} 05:10:10| |Compsetupstarter-SearchMSIRest | MSI Setup not found in Registry: HKLM\Software\Classes\Installer\Products\DD66ACCCE5064F8409A446696FC95213 05:10:10| |Compsetupstarter-TestIfInstalle | IsInstalled: 0; MsiCompInstalled: 0 05:10:10| |Compsetupstarter-Install | Component not (already and/or no longer) installed: Will install it... 05:10:10| |Compsetupstarter-SetInputParams | x86_adscomlx: Client entry set: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:10:10| |Compsetupstarter-LaComForInst | Launch installation: Call_msiexec 05:10:10| | ReadOSVersionInfo | Setup started on Windows 10 or higher: WIN10VERSION=1000 WIN10SP=0 WIN10BUILD=19045 WIN10PROTYPE=1 05:10:10| |Compsetupstarter-LaComForInst | Add Win10 Properties to Commandline: msiexec.exe /i "F:\InstData\PLCSIMADV_SimRT\Media\simatic plcsim advanced simrt.msi" /qn /L*V "C:\PROGRAMDATA\SIEMENS\AUTOMATION\LOGFILES\SETUP\SECO-PLCSIMADV_SIMRT_LOG_MSI_INTERN.TXT" ALLUSERS=1 ADS_CALLED_EXTERNAL=1 LOGGINGMAX=1 WIN10VERSION=1000 WIN10SP=0 WIN10BUILD=19045 WIN10PROTYPE=1 05:10:10| |Compsetupstarter-Call_msiexec | Call_msiexec: Commandline= C:\Windows\SysWOW64\msiexec.exe /i "F:\InstData\PLCSIMADV_SimRT\Media\simatic plcsim advanced simrt.msi" /qn /L*V "C:\PROGRAMDATA\SIEMENS\AUTOMATION\LOGFILES\SETUP\SECO-PLCSIMADV_SIMRT_LOG_MSI_INTERN.TXT" ALLUSERS=1 ADS_CALLED_EXTERNAL=1 LOGGINGMAX=1 WIN10VERSION=1000 WIN10SP=0 WIN10BUILD=19045 WIN10PROTYPE=1 05:10:10| |Compsetupstarter-Call_exeS |Start ShellExecuteEx: File= C:\Windows\SysWOW64\msiexec.exe; Parameters= /i "F:\InstData\PLCSIMADV_SimRT\Media\simatic plcsim advanced simrt.msi" /qn /L*V "C:\PROGRAMDATA\SIEMENS\AUTOMATION\LOGFILES\SETUP\SECO-PLCSIMADV_SIMRT_LOG_MSI_INTERN.TXT" ALLUSERS=1 ADS_CALLED_EXTERNAL=1 LOGGINGMAX=1 WIN10VERSION=1000 WIN10SP=0 WIN10BUILD=19045 WIN10PROTYPE=1 05:10:10| |---- START Component Setup ---- |=> MSI Component Setup started 05:10:10| |_ADSStartup |CA: START _ADSStartup (InstallExecuteSequence) 05:10:10| |_ADSStartup | Set Property ADS_RETURNCODE to 0 05:10:10| |_ADSStartup | Set Property LOGGINGLEVEL to 11 05:10:10| |_ADSStartup | Set Property ADS_TICKSTART to 37759 05:10:10| |_ADSStartup | Set Property ADS_APPL_WAITTIME to 05:10:10| |_ADSStartup | Set Property SETUP64 to NO 05:10:10| |_ADSStartup | Ext: 1 - Nested: - Deinst: 05:10:10| | | 05:10:10| |adsglobx::InitProperties | InitProperties... 05:10:10| | info |-------------------------------------------------------------------------------- 05:10:10| | info | START LOGFILE from MSI Shared Component Setup 05:10:10| | info |-------------------------------------------------------------------------------- 05:10:10| | info | Log-Filename: C:\ProgramData\Siemens\Automation\Logfiles\Setup\SECO-PLCSIMADV_SimRT_LOG.TXT 05:10:10| | info | Start Installation: 2025-04-23 05:10:10 05:10:10| | info | Frame Name: Component-Setup Masterframe 05:10:10| | info | Frame Version: 07.08.02.00_01.01.00.03 05:10:10| | info | Logginglevel: 11 05:10:10| | info | Setup64: NO 05:10:10| | info | this is a x86 Setup for x86/x64 OS 05:10:10| | info | Running on 64bit Windows: VersionNT=603 ServicePack=0 SystemLanguage=1055 05:10:10| | | 05:10:10| |adsglobx::InitProperties |-- MSI new installation assumed. REINSTALL: 0 05:10:10| | | 05:10:10| |adsglobx::InitProperties | Set Property ADS_TEMPDIR to C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:10:10| |adsglobx::InitProperties | Set Property INIINST to C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\Properties.ini 05:10:10| |adsglobx::InitProperties | Set Property UseINSTALLDIR to NO 05:10:10| |CPermanentProperties::CheckProp | Check PermanentProperties... 05:10:10| |CPermanentProperties::CheckProp | Set 0 PermanentProperties 05:10:10| |---- END Component Setup ---- |CA: END _ADSStartup 05:10:11| | | 05:10:11| |_SetMSISource |CA: START _SetMSISource 05:10:11| |_SetMSISource | New install 05:10:11| |_SetMSISource |CA: END _SetMSISource 05:10:11| | | 05:10:11| |_ADS_CompInitialize |CA: START _ADS_CompInitialize 05:10:11| |_ADS_CompInitialize | Read Property SETUP64: NO 05:10:11| |_ADS_CompInitialize | this is a x86 Setup for x86/x64 OS 05:10:11| |_ADS_CompInitialize | Read Property REG_STARTMENU_LANG: 1033 05:10:11| |_ADS_CompInitialize | Global Startmenu Language from Registry: 1033 05:10:11| |_ADS_CompInitialize | Set Property GLOBAL_STARTMENULANGUAGE to 1033 05:10:11| |WriteReg_CompSetup | Set Registry StartMenuLang= 1033 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:10:11| |_ADS_CompInitialize | Set Property COMPSUCCEEDEDVALUE to 1 05:10:11| |_ADS_CompInitialize | Set Property G_REBOOT to FALSE 05:10:11| |_ADS_CompInitialize | Set Property COMMONDIR_INTERN to 05:10:11| |ReadGlobalInfoFromIniFile_Comp | ReadGlobalInfoFromIniFile_Comp... 05:10:11| |ReadGlobalInfoFromIniFile_Comp | Read Property REMOVE: is empty! 05:10:11| |ReadGlobalInfoFromIniFile_Comp | Read Property ProductName: SIMATIC PLCSIM Advanced SimRT 05:10:11| |ReadGlobalInfoFromIniFile_Comp | Official name of this Shared Component: SIMATIC PLCSIM Advanced SimRT 05:10:11| |ReadGlobalInfoFromIniFile_Comp | Read Property RELEASE: V06.00.00.00_68.01.00.03 05:10:11| |ReadGlobalInfoFromIniFile_Comp | Read Property RegVersion: 6.0.0.0 05:10:11| |ReadGlobalInfoFromIniFile_Comp | Read Property SOURCEDIR: is empty! 05:10:11| |ReadGlobalInfoFromIniFile_Comp | could not read SOURCEDIR 05:10:11| |ReadGlobalInfoFromIniFile_Comp | Read Property OriginalDatabase: F:\InstData\PLCSIMADV_SimRT\Media\simatic plcsim advanced simrt.msi 05:10:11| |ReadGlobalInfoFromIniFile_Comp | The SETUP is started from: F:\InstData\PLCSIMADV_SimRT\Media 05:10:11| |ReadGlobalInfoFromIniFile_Comp | Comparing with data of F:\InstData\PLCSIMADV_SimRT\Media\version.ini 05:10:11| |ReadGlobalInfoFromIniFile_Comp | Compare Release from version.ini (06.00.00.00_68.01.00.03) and internal version (06.00.00.00_68.01.00.03) 05:10:11| |ReadGlobalInfoFromIniFile_Comp | Releases are identical 05:10:11| |ReadGlobalInfoFromIniFile_Comp | Read Property MAINPROD_NAME: STEP7 05:10:11| |ReadGlobalInfoFromIniFile_Comp | Read Property MAINPROD_NAMEDISPL: STEP 7 05:10:11| |ReadGlobalInfoFromIniFile_Comp | END ReadGlobalInfoFromIniFile_Comp 05:10:11| |_ADS_CompInitialize | Read Property SHORTNAME: PLCSIMADV_SimRT 05:10:11| |WriteReg_SetupSucceeded | Set Registry SetupSucceeded= 0 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:10:11| |WriteReg_CompSetup | Set Registry Restart= 0 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:10:11| |WriteReg_CompSetup | Set Registry StarterTimeout= 0 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:10:11| |_ADS_CompInitialize | Read Property ProductName: SIMATIC PLCSIM Advanced SimRT 05:10:11| |WriteReg_CompSetup | Set Registry ComponentEntry= SIMATIC PLCSIM Advanced SimRT in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:10:11| |ReadReg_CompSetup | cannot read Registry UPDATEMODE from HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup ReturnValue= 2 05:10:11| |compsetup_fct::GetClient_Comp | GetClient_Comp... 05:10:11| |compsetup_fct::GetClient_Comp | Read Property SETUP64: NO 05:10:11| |ReadReg_CompSetup | Read Registry Client= SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 from HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:10:11| |compsetup_fct::GetClient_Comp | Set MSI Property SHRCOMPCLIENT to: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:10:11| |_ADS_CompInitialize |CA: END _ADS_CompInitialize Returncode=0 05:10:11| | | 05:10:11| |_ADS_SetDirs |CA: START _ADS_SetDirs 05:10:11| |_ADS_SetDirs | STARTMENU_PLACE: AUTO 05:10:11| |_ADS_SetDirs | Set startmenu= C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Siemens Automation\ 05:10:11| |_ADS_SetDirs | Set MSI TargetPath SIEMENSMENUFOLDER to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Siemens Automation\ 05:10:11| |_ADS_SetDirs | Set Property SIEMENSMENUFOLDER to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Siemens Automation\ 05:10:11| |_ADS_SetDirs |CA: END _ADS_SetDirs 05:10:11| | | 05:10:11| |_TestSupposition |CA: START _TestSupposition 05:10:11| |_TestSupposition | Read Property SHORTNAME: PLCSIMADV_SimRT 05:10:12| |_TestSupposition | Read Property WIN10VERSION: 1000 05:10:12| |_TestSupposition | overwrite VersionNT with 1000 05:10:12| |Suppositions::TestCondition | Read Property OF_NO_OS_CHECK: is empty! 05:10:12| |Suppositions::TestCondition | OS Condition to check: (VersionNT >= 600) 05:10:12| |CMSI_dbc::EvaluateCondition | Condition (VersionNT >= 600) return TRUE 05:10:12| |_TestSupposition | Installation is allowed. 05:10:12| |_TestSupposition |CA: END _TestSupposition Returncode=0 05:10:12| | | 05:10:12| |_SiemInstGlobal_WriteBegin |CA: START _SiemInstGlobal_WriteBegin 05:10:12| |::SiemInstGlobal_WriteBegin | Read Property REMOVE: is empty! 05:10:12| |::GetLogFileCitamis | Citamis path: C:\ProgramData\Siemens\Automation\Logfiles\Setup\Citamis.str 05:10:12| |::SiemInstGlobal_WriteBegin | Read Property SHRCOMPCLIENT: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:10:12| |::SiemInstGlobal_WriteBegin | Read Property SHORTNAME: PLCSIMADV_SimRT 05:10:12| |::SiemInstGlobal_WriteBegin | Read Property RELEASE: V06.00.00.00_68.01.00.03 05:10:12| |::SiemInstGlobal_WriteBegin | Read Property RegVersion: 6.0.0.0 05:10:12| |::WriteTextToCitamis | Write to Citamis: Shared Component (MSI) PLCSIMADV_SimRT; Release: V06.00.00.00_68.01.00.03; Version: 6.0.0.0; 04-23-2025; 05:10:12; (SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9) 05:10:12| |_SiemInstGlobal_WriteBegin |CA: END _SiemInstGlobal_WriteBegin 05:10:12| | | 05:10:12| |_ProcessBeforeInst |CA: START _ProcessBeforeInst 05:10:12| |WriteCADataProperties | WriteCADataProperties... 05:10:12| |WriteCADataProperties | Read Property ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:10:12| |WriteCADataProperties | Set Property CA_DATAFILENAME to C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\CA_DataFile.ini 05:10:12| |WriteCADataProperties | save Properties to C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\CA_DataFile.ini 05:10:12| |WriteCADataProperties | END WriteCADataProperties 05:10:12| |_ProcessBeforeInst |CA: END Process before Installation 05:10:12| | | 05:10:12| |_Comp_BeforeDataMove |CA: START _Comp_BeforeDataMove 05:10:12| |_Comp_BeforeDataMove | Read Property SHORTNAME: PLCSIMADV_SimRT 05:10:12| |_Comp_BeforeDataMove | Read Property RegVersion: 6.0.0.0 05:10:12| |_Comp_BeforeDataMove | Read Property RELEASE: V06.00.00.00_68.01.00.03 05:10:12| |_Comp_BeforeDataMove | Read Property ADSCOMMANDLINE: is empty! 05:10:12| |_Comp_BeforeDataMove | Read Property SETUP64: NO 05:10:12| |TestUpdateRulesAndClient_Comp | TestUpdateRulesAndClient_Comp... 05:10:12| |TestUpdateRulesAndClient_Comp | Read Property ProductName: SIMATIC PLCSIM Advanced SimRT 05:10:12| |TestUpdateRulesAndClient_Comp | Read Property SHRCOMPCLIENT: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:10:12| |TestUpdateRulesAndClient_Comp | Read Property RegVersion: 6.0.0.0 05:10:12| |TestUpdateRulesAndClient_Comp | Read Property RELEASE: V06.00.00.00_68.01.00.03 05:10:12| |TestUpdateRulesAndClient_Comp | Read Property ADSCOMMANDLINE: is empty! 05:10:12| |TestUpdateRulesAndClient_Comp | Read Property INST_RELEASE: is empty! 05:10:12| |TestUpdateRulesAndClient_Comp | Read Property RESUME: is empty! 05:10:12| |TestUpdateRulesAndClient_Comp | Read Property SETUP64: NO 05:10:12| |TestUpdateRulesAndClient_Comp | Set Property GETSTRING to 05:10:12| |TestUpdateRulesAndClient_Comp | END TestUpdateRulesAndClient_Comp 05:10:12| |GetCommonDestPath_Comp | GetCommonDestPath_Comp... 05:10:12| |GetCommonDestPath_Comp | Read Property SETUP64: NO 05:10:12| |GetCommonDestPath_Comp | Read Property CommonFilesFolder: C:\Program Files (x86)\Common Files\ 05:10:12| |GetCommonDestPath_Comp | Read Property REMOVE: is empty! 05:10:12| |GetCommonDestPath_Comp | Read Property REINSTALL: is empty! 05:10:12| |GetCommonDestPath_Comp | Main Path and Common Path determination ... 05:10:12| |GetCommonDestPath_Comp | read from Properties.ini: [Path] UseComPath=YES 05:10:12| |GetCommonDestPath_Comp | read from Properties.ini: [Path] PathCom= 05:10:12| |GetCommonDestPath_Comp | Set Property USECOMMONDIR to TRUE 05:10:12| |GetCommonDestPath_Comp | Common directory ... 05:10:12| |Read_FromRegistry | Read Registry SharedPath= C:\Program Files (x86)\Common Files\Siemens from HKEY_LOCAL_MACHINE\SOFTWARE\Siemens\AUTSW\Global 05:10:12| |GetCommonDestPath_Comp | Read Property IS_LANGUAGEPACK: NO 05:10:12| |GetCommonDestPath_Comp | Set Property COMMONDIR_INTERN to C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |CMSI_dbc::GetTargetPath | Read MSI GetTargetPath COMMONDIR: C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |CMSI_dbc::SetTargetPath | Try to set MSI SetTargetPath COMMONDIR to C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |CMSI_dbc::SetTargetPath | Set MSI SetTargetPath COMMONDIR to C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |GetCommonDestPath_Comp | END GetCommonDestPath_Comp 05:10:12| |GetMainDestPath_Comp | GetMainDestPath_Comp... 05:10:12| |GetMainDestPath_Comp | Read Property COMMONDIR: C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |GetMainDestPath_Comp | Read Property TARGMAIN: is empty! 05:10:12| |GetMainDestPath_Comp | Read Property REINSTALL: is empty! 05:10:12| |GetMainDestPath_Comp | Read Property REMOVE: is empty! 05:10:12| |GetMainDestPath_Comp | Read Property MAINPROD_NAME: STEP7 05:10:12| |GetMainDestPath_Comp | Read Property SETUP64: NO 05:10:12| |GetMainDestPath_Comp | Base Dir is Common Path: C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |GetMainDestPath_Comp | Set Property BASEDIR to C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |GetMainDestPath_Comp | read from Properties.ini: [Path] UseMainPath=NO 05:10:12| |GetMainDestPath_Comp | MainPath isn't set because 'UseMainPath=' is not set to YES. 05:10:12| |GetMainDestPath_Comp | Set Property TARGMAIN to C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |GetMainDestPath_Comp | REINSTALL: 0 05:10:12| |CMSI_dbc::GetTargetPath | Read MSI GetTargetPath INSTALLDIR: C:\ 05:10:12| |CMSI_dbc::SetTargetPath | Try to set MSI SetTargetPath INSTALLDIR to C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |CMSI_dbc::SetTargetPath | Set MSI SetTargetPath INSTALLDIR to C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |CMSI_dbc::GetTargetPath | Read MSI GetTargetPath INSTALLDIR: C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |GetMainDestPath_Comp | Set Property INSTALLDIR to: C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |GetMainDestPath_Comp | END GetMainDestPath_Comp 05:10:12| |WriteCAPathProperties | WriteCAPathProperties... 05:10:12| |WriteCAPathProperties | Read Property CA_DATAFILENAME: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\CA_DataFile.ini 05:10:12| |WriteCAPathProperties | END WriteCAPathProperties 05:10:12| |_Comp_BeforeDataMove | Read Property ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:10:12| |CMSI_dbc::WriteTables | WriteTables... 05:10:12| |CMSI_dbc::WriteTables | Write IniFile 'C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ADS_Tables.ini' for ADS Tables 05:10:12| |CMSI_dbc::WriteTables | Write SetAttributesBefore 05:10:12| |CDeferredIniTable::WriteTable | Write IniFile for section SetAttributesBefore 05:10:12| |CDeferredIniTable::WriteTable | Query: SELECT `Path`, `Attributes`, `Function` FROM ADS_SetAttributesBefore 05:10:12| |CMSI_dbc::WriteTables | Write SetAttributesAfter 05:10:12| |CDeferredIniTable::WriteTable | Write IniFile for section SetAttributesAfter 05:10:12| |CDeferredIniTable::WriteTable | Query: SELECT `Path`, `Attributes`, `Function` FROM ADS_SetAttributesAfter 05:10:12| |CMSI_dbc::WriteTables | Write AppendRegistry 05:10:12| |CDeferredIniTable::WriteTable | Write IniFile for section AppendRegistry 05:10:12| |CDeferredIniTable::WriteTable | Query: SELECT `Root`, `Key`, `Name`, `AppendValue`, `_Component` FROM ADS_AppendRegistry 05:10:12| |CMSI_dbc::WriteTables | Write ADS_ShortCut 05:10:12| |CDeferredIniTable::WriteTable | Write IniFile for section ADS_ShortCut 05:10:12| |CDeferredIniTable::WriteTable | Query: SELECT `Shortcut`, `Directory_`, `Name`, `Component_`, `Target`, `Arguments`, `Description`, `Hotkey`, `Icon_`, `IconIndex`, `ShowCmd`, `WkDir` FROM ADS_Shortcut ORDER BY `Shortcut` 05:10:12| |CMSI_dbc::WriteTables | END WriteTables 05:10:12| |_Comp_BeforeDataMove | Read Property OVERINSTALL: is empty! 05:10:12| |compsetup_fct::TestOverWrite | TestOverWrite... 05:10:12| |compsetup_fct::TestOverWrite | Read Property COMMONDIR: C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |compsetup_fct::TestOverWrite | Read Property SHORTNAME: PLCSIMADV_SimRT 05:10:12| |compsetup_fct::TestOverWrite | Read Property SHRCOMPCLIENT: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:10:12| |compsetup_fct::TestOverWrite | Read Property RELEASE: V06.00.00.00_68.01.00.03 05:10:12| |compsetup_fct::TestOverWrite | Read Property USECOMMONDIR: TRUE 05:10:12| |compsetup_fct::TestOverWrite | Read Property BASEDIR: C:\Program Files (x86)\Common Files\Siemens\ 05:10:12| |compsetup_fct::TestOverWrite | Read Property SETUP64: NO 05:10:12| |compsetup_fct::TestOverWrite | Read Property ADSCOMMANDLINE: is empty! 05:10:12| |compsetup_fct::TestOverWrite | Read Property INST_RELEASE: is empty! 05:10:12| |compsetup_fct::TestOverWrite |--- Test if Shared Component setup is new installation, overinstallation, update, install for new client 05:10:12| |IsComponentInstalled | IsComponentInstalled... 05:10:12| |IsComponentInstalled | Read Property SHORTNAME: PLCSIMADV_SimRT 05:10:12| |IsComponentInstalled | Read Property RELEASE: V06.00.00.00_68.01.00.03 05:10:12| |Check_CompKey | RegOpenKeyEx ReturnValue= 2 05:10:12| |Check_CompKey | RegistryKey not found at HKLM\SOFTWARE\Siemens\Shared Tools\PLCSIMADV_SimRT 05:10:12| |IsComponentInstalled | Component not installed 05:10:12| |IsComponentInstalled | END IsComponentInstalled 05:10:12| |IsComponentForClientInstalled | IsComponentForClientInstalled... 05:10:12| |IsComponentForClientInstalled | Read Property SHORTNAME: PLCSIMADV_SimRT 05:10:12| |IsComponentForClientInstalled | Read Property SETUP64: NO 05:10:12| |ReadReg_CompKey | RegOpenKeyEx failed: cannot read Release from HKLM\SOFTWARE\Siemens\Shared Tools\PLCSIMADV_SimRT ReturnValue= 2 05:10:12| |IsComponentForClientInstalled | Component-Setup not registered 05:10:12| |compsetup_fct::TestOverWrite | How to install component: 05:10:12| |compsetup_fct::TestOverWrite | New installation! No 'CLIENTS' key has existed; OK. 05:10:12| |compsetup_fct::TestOverWrite | END TestOverWrite ReturnValue= 0 05:10:12| |StartAppl | ======================== 05:10:12| |StartAppl | BEGIN StartAppl... 05:10:12| |StartAppl | ======================== 05:10:12| |StartAppl | ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:10:12| |StartAppl | Property TIMEOUT= out of range (1 - 60) 05:10:12| |StartAppl | Appl1= is empty 05:10:12| |StartAppl | END StartAppl ReturnValue=0 05:10:12| |_Comp_BeforeDataMove |CA: END _Comp_BeforeDataMove 05:10:13| | | 05:10:13| |_SetAttributesBefore |CA: START _SetAttributesBefore 05:10:13| |CSetAttributes::SetAttributes | SetAttributes... 05:10:13| |CSetAttributes::SetAttributes | Load ADS_Tables.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ADS_Tables.ini 05:10:13| |CSetAttributes::SetAttributes | Set attributes from table SetAttributesBefore 05:10:13| |CSetAttributes::SetAttributes | END SetAttributes 05:10:13| |_SetAttributesBefore |CA: END _SetAttributesBefore 05:10:14| | | 05:10:14| |_CreateLanguageShortcut |CA: START _CreateLanguageShortcut 05:10:14| |CShortcut::CShortcut | If possible use the global Startmenu language by the registry: 1033 05:10:14| |CShortcut::CShortcut | read Property LANG_AV_PRODUCT: 1031;1033;1036;1034;1040;1041;1028 05:10:14| |CShortcut::CShortcut | Startmenu language used for shortcuts: 1033 05:10:14| |CShortcut::CShortcut | Load ADS_Tables.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ADS_Tables.ini 05:10:14| |CShortcut::CShortcut | Load ADSStrings.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ADSStrings.ini 05:10:14| |WriteReg_CompSetup | Set Registry StartMenuLang= 1033 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:10:14| |_CreateLanguageShortcut | Set Property GLOBAL_STARTMENULANGUAGE to 1033 05:10:14| |CShortcut::Create | Create ShortCuts... 05:10:14| |CShortcut::ReadFromIniFile | Read shortcut properties from inifile: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ADS_Tables.ini 05:10:14| |ReadReg_CompSetup | cannot read Registry MSIProperties from HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup ReturnValue= 2 05:10:14| |_CreateLanguageShortcut |CA: END _CreateLanguageShortcut 05:10:14| | | 05:10:14| |_AppendRegistryValues |CA: START _AppendRegistryValues 05:10:14| |CAppendRegistry::WriteRemoveVal | Load ADS_Tables.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ADS_Tables.ini 05:10:14| |CAppendRegistry::WriteRemoveVal | Read section AppendRegistry 05:10:14| |CAppendRegistry::WriteRemoveVal | no entries found; do nothing 05:10:14| |_AppendRegistryValues |CA: END _AppendRegistryValues Returncode=0 05:10:14| | | 05:10:14| |_SetAttributesAfter |CA: START _SetAttributesAfter 05:10:14| |CSetAttributes::SetAttributes | SetAttributes... 05:10:14| |CSetAttributes::SetAttributes | Load ADS_Tables.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ADS_Tables.ini 05:10:14| |CSetAttributes::SetAttributes | Set attributes from table SetAttributesAfter 05:10:14| |CSetAttributes::SetAttributes | END SetAttributes 05:10:14| |_SetAttributesAfter |CA: END _SetAttributesAfter 05:10:15| | | 05:10:15| |_ads_copyfiles |CA: START _ads_copyfiles 05:10:15| |_ads_copyfiles | Read Property SUPPORTDIR: is empty! 05:10:15| |_ads_copyfiles | Read Property REINSTALLMODE: is empty! 05:10:15| |_ads_copyfiles | CopyLockedFiles (RenameFilesAtReboot): Stream out: \CopyFiles.ini 05:10:15| |CMSI_dbc::StreamFromBinary | StreamOut file: ADSCopyFiles desdination: \CopyFiles.ini 05:10:15| |CMSI_dbc::StreamFromBinary | StreamOut ReturnValueerror= -4 05:10:15| |CMSI_dbc::StreamFromBinary | CopyLockedFiles (RenameFilesAtReboot): No files listed. 05:10:15| |_ads_copyfiles | CopyLockedFiles (RenameFilesAtReboot): No files listed. 05:10:15| |_ads_copyfiles |CA: END _ads_copyfiles 05:10:15| | | 05:10:15| |_ADS_WriteRegistryValues |CA: START _ADS_WriteRegistryValues 05:10:15| |_ADS_WriteRegistryValues | Read Property ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:10:15| |_ADS_WriteRegistryValues | create Directory for IniFile: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:10:15| |_ADS_WriteRegistryValues | Streamout MBRegEntries.ini to: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\MBRegEntries.ini 05:10:15| |CMSI_dbc::StreamFromBinary | StreamOut file: MBRegEntries desdination: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\MBRegEntries.ini 05:10:15| |CMSI_dbc::StreamFromBinary | StreamOut ReturnValueerror= -4 05:10:15| |CMSI_dbc::StreamFromBinary | CopyLockedFiles (RenameFilesAtReboot): No files listed. 05:10:15| |_ADS_WriteRegistryValues |CA: END _ADS_WriteRegistryValues 05:10:15| | | 05:10:15| |_Comp_AfterDataMove |CA: START _Comp_AfterDataMove 05:10:15| |_Comp_AfterDataMove | Read Property SETUP64: NO 05:10:15| |StartAppl | ======================== 05:10:15| |StartAppl | BEGIN StartApplAfter... 05:10:15| |StartAppl | ======================== 05:10:15| |StartAppl | ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:10:15| |StartAppl | Property TIMEOUT= out of range (1 - 60) 05:10:15| |StartAppl | Appl1= is empty 05:10:15| |StartAppl | END StartApplAfter ReturnValue=0 05:10:15| |_Comp_AfterDataMove |CA: _Comp_AfterDataMove END 05:10:15| | | 05:10:15| |_ProcessAfterInst |CA: START _ProcessAfterInst 05:10:15| |CSelfRegister::RegisterFiles | BEGIN RegisterFiles 05:10:15| |CSelfRegister::RegisterFiles | Read Property RebootOnEnd: NO 05:10:15| |CSelfRegister::GetRegSvr32 | Search for RegSvr32.exe 05:10:15| |CSelfRegister::GetRegSvr32 | Read Property COMMONDIR: C:\Program Files (x86)\Common Files\Siemens\ 05:10:15| |CSelfRegister::GetRegSvr32 | Look for Regserver in: C:\Program Files (x86)\Common Files\Siemens\bin\REGSVR32.EXE 05:10:15| |CSelfRegister::GetRegSvr32 | Look for Regserver in: C:\Windows\system32\REGSVR32.EXE 05:10:15| |CSelfRegister::RegisterFiles | Regserver found: C:\Windows\system32\REGSVR32.EXE 05:10:15| |CSelfRegister::RegisterFiles | END RegisterFiles 05:10:15| |_ProcessAfterInst | Read Property INIINST: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\Properties.ini 05:10:15| |_ProcessAfterInst | Read Property ADSCOMMANDLINE: is empty! 05:10:15| |_ProcessAfterInst | Read Property SETUP64: NO 05:10:15| |_ProcessAfterInst | Read Property ADS_REG_STARTMENU= NO 05:10:15| |compsetup_fct::UpdateSharedTool | 05:10:15| |compsetup_fct::UpdateSharedTool | UpdateSharedTools... 05:10:15| |compsetup_fct::UpdateSharedTool | Read Property LOGFNAME: 05:10:15| |compsetup_fct::UpdateSharedTool | Read Property AUTINSTLOG: C:\ProgramData\Siemens\Automation\Logfiles\Setup\ 05:10:15| |compsetup_fct::UpdateSharedTool | Read Property ProductName: SIMATIC PLCSIM Advanced SimRT 05:10:15| |compsetup_fct::UpdateSharedTool | Read Property RegVersion: 6.0.0.0 05:10:15| |compsetup_fct::UpdateSharedTool | Read Property RELEASE: V06.00.00.00_68.01.00.03 05:10:15| |compsetup_fct::UpdateSharedTool | Read Property COMPSUCCEEDEDVALUE: 1 05:10:15| |WriteReg_CompKey | Set Client in Registry: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 in HKLM\SOFTWARE\Siemens\Shared Tools\PLCSIMADV_SimRT\Clients 05:10:15| |compsetup_fct::UpdateSharedTool | Write Version: 6.0.0.0 05:10:15| |compsetup_fct::UpdateSharedTool | Write Release: V06.00.00.00_68.01.00.03 05:10:15| |compsetup_fct::UpdateSharedTool | Display Name: SIMATIC PLCSIM Advanced SimRT 05:10:15| |compsetup_fct::UpdateSharedTool | Logfilename: C:\ProgramData\Siemens\Automation\Logfiles\Setup\ 05:10:15| | | 05:10:15| |compsetup_fct::GoExit | GoExit...2 05:10:15| |compsetup_fct::GoExit | Read Property LOGFILENAME: C:\ProgramData\Siemens\Automation\Logfiles\Setup\SECO-PLCSIMADV_SimRT_LOG.TXT 05:10:15| |compsetup_fct::GoExit | Read Property G_REBOOT: FALSE 05:10:15| |compsetup_fct::GoExit | Read Property SHORTNAME: PLCSIMADV_SimRT 05:10:15| |compsetup_fct::GoExit | Write result parameters in registry 05:10:15| |WriteReg_CompSetup | Set Registry ComponentEntry= PLCSIMADV_SimRT in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:10:15| |WriteReg_CompSetup | Set Registry Restart= 0 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:10:15| |WriteReg_CompSetup | Set Registry LogFile= C:\ProgramData\Siemens\Automation\Logfiles\Setup\SECO-PLCSIMADV_SimRT_LOG.TXT in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:10:15| |WriteReg_SetupSucceeded | Set Registry SetupSucceeded= 1 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:10:15| |WriteReg_SetupSucceeded | Set Registry SetupSucceeded= 1 in HKLM\SOFTWARE\Siemens\Shared Tools\PLCSIMADV_SimRT 05:10:15| |compsetup_fct::GoExit | END GoExit 05:10:15| |compsetup_fct::UpdateSharedTool | END UpdateSharedTools 05:10:15| |_ProcessAfterInst |CA: END _ProcessAfterInst 05:10:15| | | 05:10:16| |_SiemInstGlobal_WriteEnd |CA: START _SiemInstGlobal_WriteEnd 05:10:16| |WriteFeatureToReg | Set Feature-State in Registry... 05:10:16| |WriteFeatureToReg | RK_InstallSW= SOFTWARE\Siemens\Shared Tools\ 05:10:16| |WriteFeatureToReg | Registry Key= SOFTWARE\Siemens\Shared Tools\PLCSIMADV_SimRT\InstalledFeatures 05:10:16| |WriteFeatureToReg | Set Feature 'PROGRAM' to registry 05:10:16| |WriteFeatureToReg | Set Feature 'MF_SUPPORT_COMPONENT' to registry 05:10:16| |::SiemInstGlobal_WriteEnd | Set end in Citamis.str... 05:10:16| |::GetLogFileCitamis | Citamis path: C:\ProgramData\Siemens\Automation\Logfiles\Setup\Citamis.str 05:10:16| |::SiemInstGlobal_WriteEnd | Read Property REMOVE: is empty! 05:10:16| |::SiemInstGlobal_WriteEnd | Read Property ONLYCLIENTENTRY: is empty! 05:10:16| |::SiemInstGlobal_WriteEnd | Read Property SHRCOMPCLIENT: SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9 05:10:16| |::SiemInstGlobal_WriteEnd | Read Property SHORTNAME: PLCSIMADV_SimRT 05:10:16| |::SiemInstGlobal_WriteEnd | Read Property RELEASE: V06.00.00.00_68.01.00.03 05:10:16| |::SiemInstGlobal_WriteEnd | Read Property RegVersion: 6.0.0.0 05:10:16| |::WriteTextToCitamis | Write to Citamis: ----> done Shared Component PLCSIMADV_SimRT; Release: V06.00.00.00_68.01.00.03; Version: 6.0.0.0; 04-23-2025; 05:10:16; (SIA_dc1a8f28-07b7-4ac2-be57-82bc1cac9bb9) 05:10:16| |_SiemInstGlobal_WriteEnd | Delete Temp-Files in C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:10:16| |_SiemInstGlobal_WriteEnd |CA: END _SiemInstGlobal_WriteEnd 05:10:16| | | 05:10:16| | info |Setup ended with 0 errors and 0 warnings. Reboot not required. 05:10:16| | info | elapsed setup time: 0 minutes 5 seconds 05:10:16| |---- END Component Setup ---- |=> MSI Component Setup end 05:10:16| |Compsetupstarter-Call_exeS |End ShellExecuteEx: MSI-Component-Setup ReturnValue= 0 05:10:16| |Compsetupstarter-LaComForInst |===================================================================================== 05:10:16| |Compsetupstarter-LaComForInst | MSI returncode= 0 (0 = OK) 05:10:16| |Compsetupstarter-GetRegValue | Read SetupSucceeded entry: HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup SetupSucceeded= 1 05:10:16| |Compsetupstarter-LaComForInst | SetupSucceeded= 1 (1 or 2 would be OK) 05:10:16| |Compsetupstarter-LaComForInst | Delete value Client at HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup - compsetup finished 05:10:16| |Compsetupstarter-InitInstance | MSI entry found in Registry: HKLM\Software\Classes\Installer\Products\DD66ACCCE5064F8409A446696FC95213 05:10:16| |--- END Component Setup EXE --- | setup.exe finished 2025-04-23 05:10:16| |=============================== |===================================================================================== 05:15:34| |---- START Component Setup ---- |=> MSI Component Setup started 05:15:34| |_ADSStartup |CA: START _ADSStartup (InstallExecuteSequence) 05:15:34| |_ADSStartup | Set Property ADS_RETURNCODE to 0 05:15:34| |_ADSStartup | Set Property LOGGINGLEVEL to 11 05:15:34| |_ADSStartup | Set Property ADS_TICKSTART to 38083 05:15:34| |_ADSStartup | Set Property ADS_APPL_WAITTIME to 05:15:34| |_ADSStartup | Set Property SETUP64 to NO 05:15:34| |_ADSStartup | Ext: - Nested: - Deinst: 1 05:15:34| | | 05:15:34| |adsglobx::InitProperties | InitProperties... 05:15:34| | info |-------------------------------------------------------------------------------- 05:15:34| | info | START LOGFILE from MSI Shared Component Setup 05:15:34| | info |-------------------------------------------------------------------------------- 05:15:34| | info | Log-Filename: C:\ProgramData\Siemens\Automation\Logfiles\Setup\SECO-PLCSIMADV_SimRT_LOG.TXT 05:15:34| | info | Start Installation: 2025-04-23 05:15:34 05:15:34| | info | Frame Name: Component-Setup Masterframe 05:15:34| | info | Frame Version: 07.08.02.00_01.01.00.03 05:15:34| | info | Logginglevel: 11 05:15:34| | info | Setup64: NO 05:15:34| | info | this is a x86 Setup for x86/x64 OS 05:15:34| | info | Running on 64bit Windows: VersionNT=603 ServicePack=0 SystemLanguage=1055 05:15:34| | | 05:15:34| |adsglobx::InitProperties | Read Property REMOVE: ALL 05:15:34| |adsglobx::InitProperties |--- Uninstallation--- ! 05:15:34| | | 05:15:34| |adsglobx::InitProperties | Set Property ADS_TEMPDIR to C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:15:34| |adsglobx::InitProperties | Set Property INIINST to C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\Properties.ini 05:15:34| |adsglobx::InitProperties | Set Property UseINSTALLDIR to NO 05:15:34| |CPermanentProperties::CheckProp | Check PermanentProperties... 05:15:34| |CPermanentProperties::CheckProp | Set 0 PermanentProperties 05:15:34| |_ADSStartup | Get old INSTALLDIR from registry: C:\Program Files (x86)\Common Files\Siemens\PLCSIMADV 05:15:34| |_ADSStartup | Current INSTALLDIR is: 05:15:34| |_ADSStartup | Current INSTALLDIR and old INSTALLDIR are not identical, set value from registry: C:\Program Files (x86)\Common Files\Siemens\PLCSIMADV 05:15:34| |_ADSStartup | Set Property INSTALLDIR to C:\Program Files (x86)\Common Files\Siemens\PLCSIMADV 05:15:34| |---- END Component Setup ---- |CA: END _ADSStartup 05:15:34| | | 05:15:34| |_SetMSISource |CA: START _SetMSISource 05:15:34| |_SetMSISource | Read Property DATABASE: C:\Windows\Installer\23e71e7.msi 05:15:34| |_SetMSISource | Read Property OriginalDatabase: C:\Windows\Installer\23e71e7.msi 05:15:34| |_SetMSISource | OriginalDatabase path [C:\Windows\Installer\23e71e7.msi] in not on CD-ROM or removable device. Set path not necessary 05:15:34| |_SetMSISource |CA: END _SetMSISource 05:15:34| | | 05:15:34| |_ADS_CompInitialize |CA: START _ADS_CompInitialize 05:15:34| |_ADS_CompInitialize | Read Property SETUP64: NO 05:15:34| |_ADS_CompInitialize | this is a x86 Setup for x86/x64 OS 05:15:34| |_ADS_CompInitialize | Read Property REG_STARTMENU_LANG: 1033 05:15:34| |_ADS_CompInitialize | Global Startmenu Language from Registry: 1033 05:15:34| |_ADS_CompInitialize | Set Property GLOBAL_STARTMENULANGUAGE to 1033 05:15:34| |WriteReg_CompSetup | Set Registry StartMenuLang= 1033 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:15:34| |_ADS_CompInitialize | Set Property COMPSUCCEEDEDVALUE to 1 05:15:34| |_ADS_CompInitialize | Set Property G_REBOOT to FALSE 05:15:34| |_ADS_CompInitialize | Set Property COMMONDIR_INTERN to 05:15:34| |ReadGlobalInfoFromIniFile_Comp | ReadGlobalInfoFromIniFile_Comp... 05:15:34| |ReadGlobalInfoFromIniFile_Comp | Read Property REMOVE: ALL 05:15:34| |ReadGlobalInfoFromIniFile_Comp | Read Property ProductName: SIMATIC PLCSIM Advanced SimRT 05:15:34| |ReadGlobalInfoFromIniFile_Comp | Official name of this Shared Component: SIMATIC PLCSIM Advanced SimRT 05:15:34| |ReadGlobalInfoFromIniFile_Comp | Read Property RELEASE: V06.00.00.00_68.01.00.03 05:15:34| |ReadGlobalInfoFromIniFile_Comp | Read Property RegVersion: 6.0.0.0 05:15:34| |ReadGlobalInfoFromIniFile_Comp | Read Property MAINPROD_NAME: STEP7 05:15:34| |ReadGlobalInfoFromIniFile_Comp | Read Property MAINPROD_NAMEDISPL: STEP 7 05:15:34| |ReadGlobalInfoFromIniFile_Comp | END ReadGlobalInfoFromIniFile_Comp 05:15:34| |_ADS_CompInitialize | Read Property SHORTNAME: PLCSIMADV_SimRT 05:15:34| |WriteReg_SetupSucceeded | Set Registry SetupSucceeded= 0 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:15:34| |WriteReg_SetupSucceeded | Set Registry SetupSucceeded= 0 in HKLM\SOFTWARE\Siemens\Shared Tools\PLCSIMADV_SimRT 05:15:34| |WriteReg_CompSetup | Set Registry Restart= 0 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:15:34| |WriteReg_CompSetup | Set Registry StarterTimeout= 0 in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:15:34| |_ADS_CompInitialize | Read Property ProductName: SIMATIC PLCSIM Advanced SimRT 05:15:34| |WriteReg_CompSetup | Set Registry ComponentEntry= SIMATIC PLCSIM Advanced SimRT in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:15:34| |ReadReg_CompSetup | cannot read Registry UPDATEMODE from HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup ReturnValue= 2 05:15:34| |compsetup_fct::GetClient_Comp | GetClient_Comp... 05:15:34| |compsetup_fct::GetClient_Comp | Read Property SETUP64: NO 05:15:34| |ReadReg_CompSetup | Read Registry Client= from HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:15:34| |compsetup_fct::GetClient_Comp | Read Property ADSCOMMANDLINE: is empty! 05:15:34| |compsetup_fct::GetClient_Comp | Set MSI Property SHRCOMPCLIENT to: called by Setup.exe 05:15:34| |_ADS_CompInitialize |CA: END _ADS_CompInitialize Returncode=0 05:15:35| | | 05:15:35| |_ADS_SetDirs |CA: START _ADS_SetDirs 05:15:35| |_ADS_SetDirs | STARTMENU_PLACE: AUTO 05:15:35| |_ADS_SetDirs | Set startmenu= C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Siemens Automation\ 05:15:35| |_ADS_SetDirs | Set MSI TargetPath SIEMENSMENUFOLDER to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Siemens Automation\ 05:15:35| |_ADS_SetDirs | Set Property SIEMENSMENUFOLDER to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Siemens Automation\ 05:15:35| |_ADS_SetDirs |CA: END _ADS_SetDirs 05:15:35| | | 05:15:35| |_ADS_SetCommonDir |CA: START _ADS_SetCommonDir 05:15:35| |_ADS_SetCommonDir | read Property ACT_COMMONDIR: C:\Program Files (x86)\Common Files\Siemens It is the global shared path found in registry. 05:15:35| |_ADS_SetCommonDir | appropriated ACT_COMMONDIR = C:\Program Files (x86)\Common Files\Siemens\ 05:15:35| |_ADS_SetCommonDir | read Property INST_COMMONDIR: C:\Program Files (x86)\Common Files\Siemens\ It is the common path from installed component setup. 05:15:35| |_ADS_SetCommonDir | Set Property COMMONDIR to C:\Program Files (x86)\Common Files\Siemens\ 05:15:35| |_ADS_SetCommonDir |CA: END _ADS_SetCommonDir 05:15:35| | | 05:15:35| |_Comp_BeforeDataMoveUninstall |CA: START _Comp_BeforeDataMoveUninstall 05:15:35| | | 05:15:35| | |Uninstalling shared component... 05:15:35| | | 05:15:35| |_Comp_BeforeDataMoveUninstall | Read Property SHORTNAME: PLCSIMADV_SimRT 05:15:35| |_Comp_BeforeDataMoveUninstall | Read Property RegVersion: 6.0.0.0 05:15:35| |_Comp_BeforeDataMoveUninstall | Read Property RELEASE: V06.00.00.00_68.01.00.03 05:15:35| |_Comp_BeforeDataMoveUninstall | Read Property SETUP64: NO 05:15:35| |_Comp_BeforeDataMoveUninstall | Read Property ADS_DEINST: 1 05:15:35| |_Comp_BeforeDataMoveUninstall | Read Property ADS_CALLED_NESTED: is empty! 05:15:35| |TestUninstDependencies | TestUninstDependencies... 05:15:35| |ReadReg_CompKey | cannot read Registry Dependency1 from HKLM\SOFTWARE\Siemens\Shared Tools\PLCSIMADV_SimRT ReturnValue= 2 05:15:35| |TestUninstDependencies | END TestUninstDependencies ReturnValue=0 05:15:35| |_Comp_BeforeDataMoveUninstall | Now test Uninstall dependencies... 05:15:35| |GetClientCount | RegOpenKeyEx failed: HKLM\SOFTWARE\Siemens\Shared Tools\PLCSIMADV_SimRT\Clients ReturnValue= 2 05:15:35| |GetCommonDestPath_Comp | GetCommonDestPath_Comp... 05:15:35| |GetCommonDestPath_Comp | Read Property SETUP64: NO 05:15:35| |GetCommonDestPath_Comp | Read Property CommonFilesFolder: C:\Program Files (x86)\Common Files\ 05:15:35| |GetCommonDestPath_Comp | Read Property REMOVE: ALL 05:15:35| |GetCommonDestPath_Comp | Read Property REINSTALL: is empty! 05:15:35| |GetCommonDestPath_Comp | Main Path and Common Path determination ... 05:15:35| |GetCommonDestPath_Comp | read from Properties.ini: [Path] UseComPath=YES 05:15:35| |GetCommonDestPath_Comp | read from Properties.ini: [Path] PathCom= 05:15:35| |GetCommonDestPath_Comp | Set Property USECOMMONDIR to TRUE 05:15:35| |GetCommonDestPath_Comp | Common directory ... 05:15:35| |Read_FromRegistry | Read Registry SharedPath= C:\Program Files (x86)\Common Files\Siemens from HKEY_LOCAL_MACHINE\SOFTWARE\Siemens\AUTSW\Global 05:15:35| |GetCommonDestPath_Comp | Read Property IS_LANGUAGEPACK: NO 05:15:35| |GetCommonDestPath_Comp | Set Property COMMONDIR_INTERN to C:\Program Files (x86)\Common Files\Siemens\ 05:15:35| |GetCommonDestPath_Comp | END GetCommonDestPath_Comp 05:15:35| |GetMainDestPath_Comp | GetMainDestPath_Comp... 05:15:35| |GetMainDestPath_Comp | Read Property COMMONDIR: C:\Program Files (x86)\Common Files\Siemens\ 05:15:35| |GetMainDestPath_Comp | Read Property TARGMAIN: is empty! 05:15:35| |GetMainDestPath_Comp | Read Property REINSTALL: is empty! 05:15:35| |GetMainDestPath_Comp | Read Property REMOVE: ALL 05:15:35| |GetMainDestPath_Comp | Read Property MAINPROD_NAME: STEP7 05:15:35| |GetMainDestPath_Comp | Read Property SETUP64: NO 05:15:35| |GetMainDestPath_Comp | Base Dir is Common Path: C:\Program Files (x86)\Common Files\Siemens\ 05:15:35| |GetMainDestPath_Comp | Set Property BASEDIR to C:\Program Files (x86)\Common Files\Siemens\ 05:15:35| |GetMainDestPath_Comp | read from Properties.ini: [Path] UseMainPath=NO 05:15:35| |GetMainDestPath_Comp | MainPath isn't set because 'UseMainPath=' is not set to YES. 05:15:35| |GetMainDestPath_Comp | Set Property TARGMAIN to C:\Program Files (x86)\Common Files\Siemens\ 05:15:35| |GetMainDestPath_Comp | REINSTALL: 0 05:15:35| |ReadReg_CompKey | Read Registry Inst_Installdir= C:\Program Files (x86)\Common Files\Siemens\ from HKLM\SOFTWARE\Siemens\Shared Tools\PLCSIMADV_SimRT 05:15:35| |GetMainDestPath_Comp | Read Registry: Component-Setup INSTALLDIR= C:\Program Files (x86)\Common Files\Siemens\ 05:15:35| |CMSI_dbc::GetTargetPath | Read MSI GetTargetPath INSTALLDIR: C:\Program Files (x86)\Common Files\Siemens\ 05:15:35| |CMSI_dbc::SetTargetPath | Try to set MSI SetTargetPath INSTALLDIR to C:\Program Files (x86)\Common Files\Siemens\ 05:15:35| |CMSI_dbc::SetTargetPath | Set MSI SetTargetPath INSTALLDIR to C:\Program Files (x86)\Common Files\Siemens\ 05:15:35| |GetMainDestPath_Comp | Set Property COMPPATH to C:\Program Files (x86)\Common Files\Siemens\ 05:15:35| |GetMainDestPath_Comp | END GetMainDestPath_Comp 05:15:35| |StartAppl | ======================== 05:15:35| |StartAppl | BEGIN PreUIStartAppl... 05:15:35| |StartAppl | ======================== 05:15:35| |StartAppl | ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:15:35| |StartAppl | Property TIMEOUT= out of range (1 - 60) 05:15:35| |StartAppl | Appl1= is empty 05:15:35| |StartAppl | END PreUIStartAppl ReturnValue=0 05:15:35| |_Comp_BeforeDataMoveUninstall |CA: END _Comp_BeforeDataMoveUninstall 05:15:35| | | 05:15:35| |_SiemInstGlobal_WriteBegin |CA: START _SiemInstGlobal_WriteBegin 05:15:35| |::SiemInstGlobal_WriteBegin | Read Property REMOVE: ALL 05:15:35| |::GetLogFileCitamis | Citamis path: C:\ProgramData\Siemens\Automation\Logfiles\Setup\Citamis.str 05:15:35| |::SiemInstGlobal_WriteBegin | Read Property SHRCOMPCLIENT: called by Setup.exe 05:15:35| |::SiemInstGlobal_WriteBegin | Read Property SHORTNAME: PLCSIMADV_SimRT 05:15:35| |::SiemInstGlobal_WriteBegin | Read Property RELEASE: V06.00.00.00_68.01.00.03 05:15:35| |::SiemInstGlobal_WriteBegin | Read Property RegVersion: 6.0.0.0 05:15:35| |::WriteTextToCitamis | Write to Citamis: Deinst PLCSIMADV_SimRT; Release: V06.00.00.00_68.01.00.03; Version: 6.0.0.0; 04-23-2025; 05:15:35; (called by Setup.exe) 05:15:35| |_SiemInstGlobal_WriteBegin |CA: END _SiemInstGlobal_WriteBegin 05:15:36| | | 05:15:36| |_ProcessBeforeInst |CA: START _ProcessBeforeInst 05:15:36| |WriteCADataProperties | WriteCADataProperties... 05:15:36| |WriteCADataProperties | Read Property ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:15:36| |WriteCADataProperties | Set Property CA_DATAFILENAME to C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\CA_DataFile.ini 05:15:36| |WriteCADataProperties | save Properties to C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\CA_DataFile.ini 05:15:36| |WriteCADataProperties | END WriteCADataProperties 05:15:36| |_ProcessBeforeInst |CA: END Process before Installation 05:15:36| | | 05:15:36| |_ProcessBeforeUninst |CA: START _ProcessBeforeUninst 05:15:36| |CSelfRegister::UnRegisterFiles | UnRegisterFiles... 05:15:36| |CSelfRegister::UnRegisterFiles | END UnRegisterFiles 05:15:36| |_ProcessBeforeUninst | Read Property ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:15:36| |CMSI_dbc::WriteTables | WriteTables... 05:15:36| |CMSI_dbc::WriteTables | Write IniFile 'C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ADS_Tables.ini' for ADS Tables 05:15:36| |CMSI_dbc::WriteTables | Write SetAttributesBefore 05:15:36| |CDeferredIniTable::WriteTable | Write IniFile for section SetAttributesBefore 05:15:36| |CDeferredIniTable::WriteTable | Query: SELECT `Path`, `Attributes`, `Function` FROM ADS_SetAttributesBefore 05:15:36| |CMSI_dbc::WriteTables | Write SetAttributesAfter 05:15:36| |CDeferredIniTable::WriteTable | Write IniFile for section SetAttributesAfter 05:15:36| |CDeferredIniTable::WriteTable | Query: SELECT `Path`, `Attributes`, `Function` FROM ADS_SetAttributesAfter 05:15:36| |CMSI_dbc::WriteTables | Write AppendRegistry 05:15:36| |CDeferredIniTable::WriteTable | Write IniFile for section AppendRegistry 05:15:36| |CDeferredIniTable::WriteTable | Query: SELECT `Root`, `Key`, `Name`, `AppendValue`, `_Component` FROM ADS_AppendRegistry 05:15:36| |CMSI_dbc::WriteTables | Write ADS_ShortCut 05:15:36| |CDeferredIniTable::WriteTable | Write IniFile for section ADS_ShortCut 05:15:36| |CDeferredIniTable::WriteTable | Query: SELECT `Shortcut`, `Directory_`, `Name`, `Component_`, `Target`, `Arguments`, `Description`, `Hotkey`, `Icon_`, `IconIndex`, `ShowCmd`, `WkDir` FROM ADS_Shortcut ORDER BY `Shortcut` 05:15:36| |CMSI_dbc::WriteTables | END WriteTables 05:15:36| |_ProcessBeforeUninst |CA: END _ProcessBeforeUninst 05:15:36| | | 05:15:36| |_RemoveLanguageShortcut |CA: START _RemoveLanguageShortcut 05:15:36| |CShortcut::CShortcut | If possible use the global Startmenu language by the registry: 1033 05:15:36| |CShortcut::CShortcut | read Property LANG_AV_PRODUCT: 1031;1033;1036;1034;1040;1041;1028 05:15:36| |CShortcut::CShortcut | Startmenu language used for shortcuts: 1033 05:15:36| |CShortcut::CShortcut | Load ADS_Tables.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ADS_Tables.ini 05:15:36| |CShortcut::CShortcut | Load ADSStrings.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ADSStrings.ini 05:15:36| |CShortcut::Remove | Remove ShortCuts... 05:15:36| |CShortcut::ReadFromIniFile | Read shortcut properties from inifile: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ADS_Tables.ini 05:15:36| |_RemoveLanguageShortcut |CA: END _RemoveLanguageShortcut 05:15:37| | | 05:15:37| |_RemoveAppendedRegistryValues |CA: START _RemoveAppendedRegistryValues 05:15:37| |CAppendRegistry::WriteRemoveVal | Load ADS_Tables.ini from C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ADS_Tables.ini 05:15:37| |CAppendRegistry::WriteRemoveVal | Read section AppendRegistry 05:15:37| |CAppendRegistry::WriteRemoveVal | no entries found; do nothing 05:15:37| |_RemoveAppendedRegistryValues |CA: END _RemoveAppendedRegistryValues Returncode=0 05:15:37| | | 05:15:37| |_ads_copyfiles |CA: START _ads_copyfiles 05:15:37| |_ads_copyfiles | Read Property SUPPORTDIR: is empty! 05:15:37| |_ads_copyfiles | Read Property REINSTALLMODE: is empty! 05:15:37| |_ads_copyfiles | CopyLockedFiles (RenameFilesAtReboot): Stream out: \CopyFiles.ini 05:15:37| |CMSI_dbc::StreamFromBinary | StreamOut file: ADSCopyFiles desdination: \CopyFiles.ini 05:15:37| |CMSI_dbc::StreamFromBinary | StreamOut ReturnValueerror= -4 05:15:37| |CMSI_dbc::StreamFromBinary | CopyLockedFiles (RenameFilesAtReboot): No files listed. 05:15:37| |_ads_copyfiles | CopyLockedFiles (RenameFilesAtReboot): No files listed. 05:15:37| |_ads_copyfiles |CA: END _ads_copyfiles 05:15:37| | | 05:15:37| |_EraseDirs |CA: START _EraseDirs 05:15:37| |_EraseDirs |CA: END _EraseDirs Returncode=0 05:15:37| | | 05:15:37| |_Comp_AfterDataMoveUninstall |CA: START _Comp_AfterDataMoveUninstall 05:15:37| |GetCommonDestPath_Comp | GetCommonDestPath_Comp... 05:15:37| |GetCommonDestPath_Comp | Read Property SETUP64: NO 05:15:37| |GetCommonDestPath_Comp | Read Property CommonFilesFolder: C:\Program Files (x86)\Common Files\ 05:15:37| |GetCommonDestPath_Comp | Read Property REMOVE: ALL 05:15:37| |GetCommonDestPath_Comp | Read Property REINSTALL: is empty! 05:15:37| |GetCommonDestPath_Comp | Main Path and Common Path determination ... 05:15:37| |GetCommonDestPath_Comp | read from Properties.ini: [Path] UseComPath=YES 05:15:37| |GetCommonDestPath_Comp | read from Properties.ini: [Path] PathCom= 05:15:37| |GetCommonDestPath_Comp | Set Property USECOMMONDIR to TRUE 05:15:37| |GetCommonDestPath_Comp | Common directory ... 05:15:37| |Read_FromRegistry | Read Registry SharedPath= C:\Program Files (x86)\Common Files\Siemens from HKEY_LOCAL_MACHINE\SOFTWARE\Siemens\AUTSW\Global 05:15:37| |GetCommonDestPath_Comp | Read Property IS_LANGUAGEPACK: NO 05:15:37| |GetCommonDestPath_Comp | Set Property COMMONDIR_INTERN to C:\Program Files (x86)\Common Files\Siemens\ 05:15:37| |GetCommonDestPath_Comp | END GetCommonDestPath_Comp 05:15:37| |GetMainDestPath_Comp | GetMainDestPath_Comp... 05:15:37| |GetMainDestPath_Comp | Read Property COMMONDIR: C:\Program Files (x86)\Common Files\Siemens\ 05:15:37| |GetMainDestPath_Comp | Read Property TARGMAIN: C:\Program Files (x86)\Common Files\Siemens\ 05:15:37| |GetMainDestPath_Comp | Read Property REINSTALL: is empty! 05:15:37| |GetMainDestPath_Comp | Read Property REMOVE: ALL 05:15:37| |GetMainDestPath_Comp | Read Property MAINPROD_NAME: STEP7 05:15:37| |GetMainDestPath_Comp | Read Property SETUP64: NO 05:15:37| |GetMainDestPath_Comp | Base Dir is Common Path: C:\Program Files (x86)\Common Files\Siemens\ 05:15:37| |GetMainDestPath_Comp | Set Property BASEDIR to C:\Program Files (x86)\Common Files\Siemens\ 05:15:37| |GetMainDestPath_Comp | read from Properties.ini: [Path] UseMainPath=NO 05:15:37| |GetMainDestPath_Comp | MainPath isn't set because 'UseMainPath=' is not set to YES. 05:15:37| |GetMainDestPath_Comp | Set Property TARGMAIN to C:\Program Files (x86)\Common Files\Siemens\ 05:15:37| |GetMainDestPath_Comp | REINSTALL: 0 05:15:37| |ReadReg_CompKey | cannot read Registry Inst_Installdir from HKLM\SOFTWARE\Siemens\Shared Tools\PLCSIMADV_SimRT ReturnValue= 2 05:15:37| |GetMainDestPath_Comp | Read Registry: Component-Setup INSTALLDIR= 05:15:37| |GetMainDestPath_Comp | Property COMPPATH and INSTALLDIR cannot set 05:15:37| |GetMainDestPath_Comp | END GetMainDestPath_Comp 05:15:37| |StartAppl | ======================== 05:15:37| |StartAppl | BEGIN StartApplAfterUninstall... 05:15:37| |StartAppl | ======================== 05:15:37| |StartAppl | ADS_TEMPDIR: C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:15:37| |StartAppl | Property TIMEOUT= out of range (1 - 60) 05:15:37| |StartAppl | Appl1= is empty 05:15:37| |StartAppl | END StartApplAfterUninstall ReturnValue=0 05:15:37| |WriteReg_CompSetup | Set Registry ComponentEntry= in HKLM\SOFTWARE\Siemens\Shared Tools\CompSetup 05:15:37| |_Comp_AfterDataMoveUninstall |CA: _Comp_AfterDataMoveUninstall END 05:15:38| | | 05:15:38| |_ProcessAfterUninst |CA: START _ProcessAfterUninst 05:15:38| |_ProcessAfterUninst |CA: _ProcessAfterUninst END 05:15:38| | | 05:15:38| |_SiemInstGlobal_WriteEnd |CA: START _SiemInstGlobal_WriteEnd 05:15:38| |WriteFeatureToReg | Set Feature-State in Registry... 05:15:38| |WriteFeatureToReg | RK_InstallSW= SOFTWARE\Siemens\Shared Tools\ 05:15:38| |WriteFeatureToReg | Registry Key= SOFTWARE\Siemens\Shared Tools\PLCSIMADV_SimRT\InstalledFeatures 05:15:38| |WriteFeatureToReg | delete Feature 'PROGRAM' in registry if set 05:15:38| |WriteFeatureToReg | delete Feature 'MF_SUPPORT_COMPONENT' in registry if set 05:15:38| |DeleteKeyIfEmpty | delete Registry Key = SOFTWARE\Siemens\Shared Tools\PLCSIMADV_SimRT\InstalledFeatures if empty 05:15:38| |DeleteKeyIfEmpty | delete subkey: InstalledFeatures 05:15:38| |DeleteKeyIfEmpty | delete Registry Key = SOFTWARE\Siemens\Shared Tools\\PLCSIMADV_SimRT if empty 05:15:38| |DeleteKeyIfEmpty | delete subkey: PLCSIMADV_SimRT 05:15:38| |DeleteKeyIfEmpty | delete Registry Key = SOFTWARE\Siemens\Shared Tools\ if empty 05:15:38| |DeleteKeyIfEmpty | delete subkey: 05:15:38| |DeleteKeyIfEmpty | delete Registry Key = SOFTWARE\Siemens\Shared Tools if empty 05:15:38| |DeleteKeyIfEmpty | delete subkey: Shared Tools 05:15:38| |::SiemInstGlobal_WriteEnd | Set end in Citamis.str... 05:15:38| |::GetLogFileCitamis | Citamis path: C:\ProgramData\Siemens\Automation\Logfiles\Setup\Citamis.str 05:15:38| |::SiemInstGlobal_WriteEnd | Read Property REMOVE: ALL 05:15:38| |::SiemInstGlobal_WriteEnd | Read Property ONLYCLIENTENTRY: is empty! 05:15:38| |::SiemInstGlobal_WriteEnd | Read Property SHRCOMPCLIENT: called by Setup.exe 05:15:38| |::SiemInstGlobal_WriteEnd | Read Property SHORTNAME: PLCSIMADV_SimRT 05:15:38| |::SiemInstGlobal_WriteEnd | Read Property RELEASE: V06.00.00.00_68.01.00.03 05:15:38| |::SiemInstGlobal_WriteEnd | Read Property RegVersion: 6.0.0.0 05:15:38| |::WriteTextToCitamis | Write to Citamis: ----> done Deinst PLCSIMADV_SimRT; Release: V06.00.00.00_68.01.00.03; Version: 6.0.0.0; 04-23-2025; 05:15:38; (called by Setup.exe) 05:15:38| |_SiemInstGlobal_WriteEnd | Delete Temp-Files in C:\Users\FikoYT\AppData\Local\Temp\{CCCA66DD-605E-48F4-904A-6496F69C2531}\ 05:15:38| |_SiemInstGlobal_WriteEnd |CA: END _SiemInstGlobal_WriteEnd 05:15:38| | | 05:15:38| | info |Setup ended with 0 errors and 0 warnings. Reboot not required. 05:15:38| | info | elapsed setup time: 0 minutes 3 seconds 05:15:38| |---- END Component Setup ---- |=> MSI Component Setup end