## WiFiMulti_Generic [![arduino-library-badge](https://www.ardu-badge.com/badge/WiFiMulti_Generic.svg?)](https://www.ardu-badge.com/WiFiMulti_Generic) [![GitHub release](https://img.shields.io/github/release/khoih-prog/WiFiMulti_Generic.svg)](https://github.com/khoih-prog/WiFiMulti_Generic/releases) [![contributions welcome](https://img.shields.io/badge/contributions-welcome-brightgreen.svg?style=flat)](#Contributing) [![GitHub issues](https://img.shields.io/github/issues/khoih-prog/WiFiMulti_Generic.svg)](http://github.com/khoih-prog/WiFiMulti_Generic/issues) Donate to my libraries using BuyMeACoffee --- --- ## Table of Contents * [Why do we need this WiFiMulti_Generic library](#why-do-we-need-this-WiFiMulti_Generic-library) * [Features](#features) * [Currently supported Boards](#currently-supported-boards) * [Currently supported WiFi shields/modules](#currently-supported-wifi-shieldsmodules) * [Changelog](changelog.md) * [Prerequisites](#prerequisites) * [Installation](#installation) * [Use Arduino Library Manager](#use-arduino-library-manager) * [Manual Install](#manual-install) * [VS Code & PlatformIO](#vs-code--platformio) * [Packages' Patches](#packages-patches) * [1. For Adafruit nRF52840 and nRF52832 boards](#1-for-adafruit-nRF52840-and-nRF52832-boards) * [2. For Teensy boards](#2-for-teensy-boards) * [3. For Arduino SAM DUE boards](#3-for-arduino-sam-due-boards) * [4. For Arduino SAMD boards](#4-for-arduino-samd-boards) * [For core version v1.8.10+](#for-core-version-v1810) * [For core version v1.8.9-](#for-core-version-v189-) * [5. For Adafruit SAMD boards](#5-for-adafruit-samd-boards) * [6. For Seeeduino SAMD boards](#6-for-seeeduino-samd-boards) * [7. For STM32 boards](#7-for-stm32-boards) * [7.1. For STM32 boards to use LAN8720](#71-for-stm32-boards-to-use-lan8720) * [7.2. For STM32 boards to use Serial1](#72-for-stm32-boards-to-use-serial1) * [8. For RP2040-based boards using Earle Philhower arduino-pico core](#8-for-rp2040-based-boards-using-earle-philhower-arduino-pico-core) * [8.1. To use BOARD_NAME](#81-to-use-board_name) * [8.2. To avoid compile error relating to microsecondsToClockCycles](#82-to-avoid-compile-error-relating-to-microsecondstoclockcycles) * [9. For Portenta_H7 boards using Arduino IDE in Linux](#9-for-portenta_h7-boards-using-arduino-ide-in-linux) * [10. For RTL8720DN boards using AmebaD core](#10-for-rtl8720dn-boards-using-amebad-core) * [11. For SAMD21 and SAMD51 boards using ArduinoCore-fab-sam core](#11-For-SAMD21-and-SAMD51-boards-using-ArduinoCore-fab-sam-core) * [12. For Seeeduino RP2040 boards](#12-For-Seeeduino-RP2040-boards) * [Libraries' Patches](#libraries-patches) * [1. ArduinoSTL for AVR boards](#1-ArduinoSTL-for-AVR-boards) * [Examples](#examples) * [ 1. WiFiMulti](examples/WiFiMulti) * [ 2. WiFiMulti_RP2040W](examples/WiFiMulti_RP2040W) **New** * [Example WiFiMulti](#example-WiFiMulti) * [1. File WiFiMulti.ino](#1-File-WiFiMultiino) * [2. File defines.h](#2-File-definesh) * [Debug Terminal Output Samples](#debug-terminal-output-samples) * [ 1. WiFiMulti on RASPBERRY_PI_PICO](#1-WiFiMulti-on-RASPBERRY_PI_PICO) * [ 2. WiFiMulti on MBED RaspberryPi Pico](#2-WiFiMulti-on-MBED-RaspberryPi-Pico) * [ 3. WiFiMulti on Nano RP2040 Connect](#3-WiFiMulti-on-Nano-RP2040-Connect) * [ 4. WiFiMulti on NANO_RP2040_CONNECT](#4-WiFiMulti-on-NANO_RP2040_CONNECT) * [ 5. WiFiMulti on ESP8266_NODEMCU_ESP12E](#5-WiFiMulti-on-ESP8266_NODEMCU_ESP12E) * [ 6. WiFiMulti on ESP32C3_DEV](#6-WiFiMulti-on-ESP32C3_DEV) * [ 7. WiFiMulti on ESP32S3_DEV](#7-WiFiMulti-on-ESP32S3_DEV) * [ 8. WiFiMulti on Arduino AVR Mega2560](#8-WiFiMulti-on-Arduino-AVR-Mega2560) * [ 9. WiFiMulti on RTL8720DN](#9-WiFiMulti-on-RTL8720DN) * [10. WiFiMulti on PORTENTA_H7_M7](#10-WiFiMulti-on-PORTENTA_H7_M7) * [11. WiFiMulti on RP2040W](#11-WiFiMulti-on-RP2040W) * [Debug](#debug) * [Troubleshooting](#troubleshooting) * [Issues](#issues) * [TO DO](#to-do) * [DONE](#done) * [Contributions and Thanks](#contributions-and-thanks) * [Contributing](#contributing) * [License](#license) * [Copyright](#copyright) --- --- ### Why do we need this [WiFiMulti_Generic library](https://github.com/khoih-prog/WiFiMulti_Generic) #### Features This [**WiFiMulti_Generic library**](https://github.com/khoih-prog/WiFiMulti_Generic) is a simple MultiWiFi library to adapt ESP32/ESP8266 `MultiWiFi` feature of WiFi libraries to all other WiFi modules and libraries. The functions are similar and compatible to those of [`ESP32 MultiWiFi`](https://github.com/espressif/arduino-esp32/tree/master/libraries/WiFi) and [`ESP8266 MultiWiFi`](https://github.com/esp8266/Arduino/tree/master/libraries/ESP8266WiFi) libraries to make life much easier to port sketches from ESP8266/ESP32. #### Currently Supported Boards This [**WiFiMulti_Generic library**](https://github.com/khoih-prog/WiFiMulti_Generic) currently supports these following boards: 1. SAM DUE 2. SAMD21 - Arduino: ZERO, MKR, NANO_33_IOT, etc. - Adafruit SAMD21 (M0) : ItsyBitsy M0, Feather M0, Feather M0 Express, Metro M0 Express, Circuit Playground Express, Trinket M0, PIRkey, HalloWing M0, Crickit M0, etc. - Seeeduino: LoRaWAN, Zero, Femto M0, XIAO M0, Wio GPS Board, etc. 3. SAMD51 - Adafruit SAMD51 (M4) : Metro M4, Grand Central M4, ItsyBitsy M4, Feather M44 Express, Trellis M4, Metro M4 AirLift lite, MONSTER M4SK Express, Hallowing EM4 xpress, etc. - Seeeduino: Wio Terminal, Grove UI Wireless 4. Teensy (4.1, 4.0, 3.6, 3.5, 3,2, 3.1, 3.0, LC) 5. All STM32F/L/H/G/WB/MP1 with more than 32KB flash memory using stm32duino `Arduino_Core_STM32` 6. AVR Mega1280, 2560, ADK, 32U4, 16U4, etc. using Arduino, Adafruit or Sparkfun core. To use patch for `ArduinoSTL` library. **New** 7. RP2040-based boards, such as **Nano RP2040 Connect**, or **RASPBERRY_PI_PICO_W with CYW43439 WiFi**, using [**Arduino-mbed RP2040** core](https://github.com/arduino/ArduinoCore-mbed) or [**Earle Philhower's arduino-pico** core](https://github.com/earlephilhower/arduino-pico) 8. RP2040-based boards, such as **RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040**, using [**Arduino-mbed RP2040** core](https://github.com/arduino/ArduinoCore-mbed) or [**Earle Philhower's arduino-pico** core](https://github.com/earlephilhower/arduino-pico). 9. **ESP32** - ESP32 boards, such as `ESP32_DEV`, etc. - ESP32S2-based boards, such as `ESP32S2_DEV`, `ESP32_S2 Saola`, etc. - ESP32C3-based boards, such as `ESP32C3_DEV`, etc. - ESP32_S3 (ESP32S3_DEV, ESP32_S3_BOX, UM TINYS3, UM PROS3, UM FEATHERS3, etc.) 10. **ESP8266** 11. **Portenta_H7** **New** 12. **nRF52 boards**, such as **AdaFruit Feather nRF52832, nRF52840 Express, BlueFruit Sense, Itsy-Bitsy nRF52840 Express, Metro nRF52840 Express, NINA_B302_ublox, NINA_B112_ublox, etc.** 13. Arduino `megaAVR` boards using Arduino core - UNO WiFi Rev2 : `WiFi101` **New** - Nano Every : `WiFiEspAT` **New** 14. CO2 Ampel - SAMD : `WiFi101` **New** 15. STM32 using `STM32duino Maple` core. **New** 16. Sparkfun SAMD - SAMD21, SAMD51 : `WiFiEspAT` **New** 17. Industruino SAMD - D21G : WiFiEspAT **New** 18. Tlera Corp STM32WB boards - Firefly-WB55RG, Nucleo-WB55RG, etc. : `WiFiEspAT` **New** 19. Maixduino boards - Sipeed Maixduino, etc. : `WiFiEspAT` **New** 20. `RTL8720DN` using Realtek `AmebaD` core **New** 21. Arduino, Sparkfun, Adafruit, etc. AVR boards (Mega, 32U4, etc.). To use patch for `ArduinoSTL` library **New** - Arduino Uno / Mega / Duemilanove / Diecimila / LilyPad / Mini / Fio / Nano, etc. - **Arduino ATMega 16U4, 32U4** such as AVR Leonardo, Leonardo ETH, YUN, Esplora, LILYPAD_USB, AVR_ROBOT_CONTROL, AVR_ROBOT_MOTOR, AVR_INDUSTRIAL101, etc. - **Adafruit ATMega 32U4** such as AVR_FLORA8, AVR_FEATHER32U4, AVR_CIRCUITPLAY, AVR_ITSYBITSY32U4_5V, AVR_ITSYBITSY32U4_3V, AVR_BLUEFRUITMICRO, AVR_ADAFRUIT32U4, etc. - **Adafruit ATMega 328(P)** such as AVR_METRO, AVR_FEATHER328P, AVR_PROTRINKET5, AVR_PROTRINKET3, AVR_PROTRINKET5FTDI, AVR_PROTRINKET3FTDI, etc. - **Generic or Sparkfun AVR ATmega_32U4** such as **AVR_MAKEYMAKEY, AVR_PROMICRO, etc.** - **Generic or Sparkfun AVR ATmega_328(P)** such as **ARDUINO_REDBOT, ARDUINO_AVR_DIGITAL_SANDBOX, etc.** - **Generic or Sparkfun AVR ATmega128RFA1** such as **ATMEGA128RFA1_DEV_BOARD, etc.** --- #### Currently supported WiFi shields/modules 1. WiFiNINA using [`WiFiNINA_Generic library`](https://github.com/khoih-prog/WiFiNINA_Generic) 2. WiFi101 using [`WiFi101 library`](https://github.com/arduino-libraries/WiFi101) **New** 3. u-blox W101, W102 using [`WiFiNINA_Generic library`](https://github.com/khoih-prog/WiFiNINA_Generic) 4. ESP8266-AT command using [`WiFiEspAT library`](https://github.com/jandrassy/WiFiEspAT) 5. ESP8266/ESP32-AT command using [`ESP_AT_Lib library`](https://github.com/khoih-prog/ESP_AT_Lib) 6. Built-in WiFi of ESP32, ESP8266 7. Built-in WiFi of Portenta_H7 **New** 8. Built-in CYW43439 WiFi of RASPBERRY_PI_PICO_W **New** --- --- ## Prerequisites 1. [`Arduino IDE 1.8.19+` for Arduino](https://github.com/arduino/Arduino). [![GitHub release](https://img.shields.io/github/release/arduino/Arduino.svg)](https://github.com/arduino/Arduino/releases/latest) 2. [`ESP32 Core 2.0.4+`](https://github.com/espressif/arduino-esp32) for ESP32-based boards. [![Latest release](https://img.shields.io/github/release/espressif/arduino-esp32.svg)](https://github.com/espressif/arduino-esp32/releases/latest/) 3. [`ESP8266 Core 3.0.2+`](https://github.com/esp8266/Arduino) for ESP8266-based boards. [![Latest release](https://img.shields.io/github/release/esp8266/Arduino.svg)](https://github.com/esp8266/Arduino/releases/latest/). 4. [`Arduino AVR core 1.8.5+`](https://github.com/arduino/ArduinoCore-avr) for Arduino (Use Arduino Board Manager) for AVR boards. [![GitHub release](https://img.shields.io/github/release/arduino/ArduinoCore-avr.svg)](https://github.com/arduino/ArduinoCore-avr/releases/latest) **New** 5. [`Adafruit AVR core 1.4.14+`](https://github.com/adafruit/Adafruit_Arduino_Boards) for Adafruit AVR boards. Use Arduino Board Manager to install. **New** 6. [`Sparkfun AVR core 1.1.13+`](https://github.com/sparkfun/Arduino_Boards) for Sparkfun AVR boards. Use Arduino Board Manager to install. **New** 7. [`Teensy core v1.57+`](https://www.pjrc.com/teensy/td_download.html) for Teensy (4.1, 4.0, 3.6, 3.5, 3,2, 3.1, 3.0) boards. 8. [`Arduino SAM DUE core v1.6.12+`](https://github.com/arduino/ArduinoCore-sam) for SAM DUE ARM Cortex-M3 boards. 9. [`Arduino SAMD core 1.8.13+`](https://github.com/arduino/ArduinoCore-samd) for SAMD ARM Cortex-M0+ boards. [![GitHub release](https://img.shields.io/github/release/arduino/ArduinoCore-samd.svg)](https://github.com/arduino/ArduinoCore-samd/releases/latest) 10. [`Adafruit SAMD core 1.7.10+`](https://github.com/adafruit/ArduinoCore-samd) for SAMD ARM Cortex-M0+ and M4 boards (Nano 33 IoT, etc.). [![GitHub release](https://img.shields.io/github/release/adafruit/ArduinoCore-samd.svg)](https://github.com/adafruit/ArduinoCore-samd/releases/latest) 11. [`Seeeduino SAMD core 1.8.3+`](https://github.com/Seeed-Studio/ArduinoCore-samd) for SAMD21/SAMD51 boards (XIAO M0, Wio Terminal, etc.). [![Latest release](https://img.shields.io/github/release/Seeed-Studio/ArduinoCore-samd.svg)](https://github.com/Seeed-Studio/ArduinoCore-samd/releases/latest/) 12. [`Adafruit nRF52 v1.3.0+`](https://github.com/adafruit/Adafruit_nRF52_Arduino) for nRF52 boards such as Adafruit NRF52840_FEATHER, NRF52832_FEATHER, NRF52840_FEATHER_SENSE, NRF52840_ITSYBITSY, NRF52840_CIRCUITPLAY, NRF52840_CLUE, NRF52840_METRO, NRF52840_PCA10056, PARTICLE_XENON, **NINA_B302_ublox**, etc. [![GitHub release](https://img.shields.io/github/release/adafruit/Adafruit_nRF52_Arduino.svg)](https://github.com/adafruit/Adafruit_nRF52_Arduino/releases/latest) 13. [`Arduino Core for STM32 v2.3.0+`](https://github.com/stm32duino/Arduino_Core_STM32) for STM32F/L/H/G/WB/MP1 boards. [![GitHub release](https://img.shields.io/github/release/stm32duino/Arduino_Core_STM32.svg)](https://github.com/stm32duino/Arduino_Core_STM32/releases/latest) 14. [`Earle Philhower's arduino-pico core v2.4.0+`](https://github.com/earlephilhower/arduino-pico) for RP2040-based boards such as **RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040**, etc. [![GitHub release](https://img.shields.io/github/release/earlephilhower/arduino-pico.svg)](https://github.com/earlephilhower/arduino-pico/releases/latest) 15. [`ArduinoCore-mbed mbed_rp2040, mbed_nano, mbed_portenta core 3.1.1+`](https://github.com/arduino/ArduinoCore-mbed) for Arduino (Use Arduino Board Manager) **Portenta_H7, RP2040-based boards, such as Nano_RP2040_Connect, RASPBERRY_PI_PICO**. [![GitHub release](https://img.shields.io/github/release/arduino/ArduinoCore-mbed.svg)](https://github.com/arduino/ArduinoCore-mbed/releases/latest) 16. [`Arduino megaAVR core 1.8.7+`](https://github.com/arduino/ArduinoCore-megaavr/releases) for Arduino megaAVR boards such as **Arduino UNO WiFi Rev2, AVR_NANO_EVERY, etc.** 17. [`STM32 Arduino_STM32 core 1.0.0+`](https://github.com/rogerclarkmelbourne/Arduino_STM32) for STM32F boards. [![GitHub release](https://img.shields.io/github/release/rogerclarkmelbourne/Arduino_STM32.svg)](https://github.com/rogerclarkmelbourne/Arduino_STM32/releases/latest). **New** 18. [`MegaCoreX megaAVR core 1.1.0+`](https://github.com/MCUdude/MegaCoreX/releases) for Arduino megaAVR boards. [![GitHub release](https://img.shields.io/github/release/MCUdude/MegaCoreX.svg)](https://github.com/MCUdude/MegaCoreX/releases/latest). Follow [**How to install**](https://github.com/MCUdude/MegaCoreX#how-to-install). **Not yet** 19. [`Functional-Vlpp library v1.0.2+`](https://github.com/khoih-prog/functional-vlpp) to use server's lambda function. To install. check [![arduino-library-badge](https://www.ardu-badge.com/badge/Functional-Vlpp.svg?)](https://www.ardu-badge.com/Functional-Vlpp) 20. [`WiFiNINA_Generic library v1.8.14-5+`](https://github.com/khoih-prog/WiFiNINA_Generic) if using WiFiNINA. To install. check [![arduino-library-badge](https://www.ardu-badge.com/badge/WiFiNINA_Generic.svg?)](https://www.ardu-badge.com/WiFiNINA_Generic). 21. [`Modified WiFi101 Library v0.16.1+`](https://github.com/khoih-prog/WiFi101) to use SAMD MKR1000, etc. boards with WiFi101. 22. [`WiFiEspAT library v1.4.1+`](https://github.com/jandrassy/WiFiEspAT) if using ESP8288/ESP32-AT shields. [![GitHub release](https://img.shields.io/github/release/jandrassy/WiFiEspAT.svg)](https://github.com/jandrassy/WiFiEspAT/releases/latest) 23. [`ArduinoSTL library v1.3.3+`](https://github.com/mike-matera/ArduinoSTL) if using AVR boards. [![GitHub release](https://img.shields.io/github/release/mike-matera/ArduinoSTL.svg)](https://github.com/mike-matera/ArduinoSTL/releases/latest) 24. [`ESP_AT_Lib library v1.4.1+`](https://github.com/khoih-prog/ESP_AT_Lib) if using ESP8288/ESP32-AT shields. To install, check [![arduino-library-badge](https://www.ardu-badge.com/badge/ESP_AT_Lib.svg?)](https://www.ardu-badge.com/ESP_AT_Lib). --- --- ## Installation ### Use Arduino Library Manager The best and easiest way is to use `Arduino Library Manager`. Search for `WiFiMulti_Generic`, then select / install the latest version. You can also use this link [![arduino-library-badge](https://www.ardu-badge.com/badge/WiFiMulti_Generic.svg?)](https://www.ardu-badge.com/WiFiMulti_Generic) for more detailed instructions. ### Manual Install 1. Navigate to [WiFiMulti_Generic](https://github.com/khoih-prog/WiFiMulti_Generic) page. 2. Download the latest release `WiFiMulti_Generic-master.zip`. 3. Extract the zip file to `WiFiMulti_Generic-master` directory 4. Copy the whole `WiFiMulti_Generic-master` folder to Arduino libraries' directory such as `~/Arduino/libraries/`. ### VS Code & PlatformIO: 1. Install [VS Code](https://code.visualstudio.com/) 2. Install [PlatformIO](https://platformio.org/platformio-ide) 3. Install [**WiFiMulti_Generic** library](https://registry.platformio.org/libraries/khoih-prog/WiFiMulti_Generic) by using [Library Manager](https://registry.platformio.org/libraries/khoih-prog/WiFiMulti_Generic/installation). Search for WiFiMulti_Generic in [Platform.io Author's Libraries](https://platformio.org/lib/search?query=author:%22Khoi%20Hoang%22) 4. Use included [platformio.ini](platformio/platformio.ini) file from examples to ensure that all dependent libraries will installed automatically. Please visit documentation for the other options and examples at [Project Configuration File](https://docs.platformio.org/page/projectconf.html) --- --- ### Packages' Patches #### 1. For Adafruit nRF52840 and nRF52832 boards **To be able to compile, run and automatically detect and display BOARD_NAME on nRF52840/nRF52832 boards**, you have to copy the whole [nRF52 Packages_Patches](Packages_Patches/adafruit/hardware/nrf52/1.3.0) directory into Adafruit nRF52 directory (~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0). Supposing the Adafruit nRF52 version is 1.3.0. These files must be copied into the directory: - `~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/platform.txt` - `~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/boards.txt` - `~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Udp.h` - `~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Print.h` - `~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Print.cpp` - `~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/variants/NINA_B302_ublox/variant.h` - `~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/variants/NINA_B302_ublox/variant.cpp` - `~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/variants/NINA_B112_ublox/variant.h` - `~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/variants/NINA_B112_ublox/variant.cpp` - **`~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Udp.h`** Whenever a new version is installed, remember to copy these files into the new version directory. For example, new version is x.yy.z These files must be copied into the directory: - `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/platform.txt` - `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/boards.txt` - `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Udp.h` - `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Print.h` - `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Print.cpp` - `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B302_ublox/variant.h` - `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B302_ublox/variant.cpp` - `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B112_ublox/variant.h` - `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B112_ublox/variant.cpp` - **`~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Udp.h`** #### 2. For Teensy boards **To be able to compile and run on Teensy boards**, you have to copy the files in [**Packages_Patches for Teensy directory**](Packages_Patches/hardware/teensy/avr) into Teensy hardware directory (./arduino-1.8.19/hardware/teensy/avr/boards.txt). Supposing the Arduino version is 1.8.19. These files must be copied into the directory: - `./arduino-1.8.19/hardware/teensy/avr/boards.txt` - `./arduino-1.8.19/hardware/teensy/avr/cores/teensy/Stream.h` - `./arduino-1.8.19/hardware/teensy/avr/cores/teensy3/Stream.h` - `./arduino-1.8.19/hardware/teensy/avr/cores/teensy4/Stream.h` Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz These files must be copied into the directory: - `./arduino-x.yy.zz/hardware/teensy/avr/boards.txt` - `./arduino-x.yy.zz/hardware/teensy/avr/cores/teensy/Stream.h` - `./arduino-x.yy.zz/hardware/teensy/avr/cores/teensy3/Stream.h` - `./arduino-x.yy.zz/hardware/teensy/avr/cores/teensy4/Stream.h` #### 3. For Arduino SAM DUE boards **To be able to compile and run on SAM DUE boards**, you have to copy the whole [SAM DUE](Packages_Patches/arduino/hardware/sam/1.6.12) directory into Arduino sam directory (~/.arduino15/packages/arduino/hardware/sam/1.6.12). Supposing the Arduino SAM core version is 1.6.12. This file must be copied into the directory: - `~/.arduino15/packages/arduino/hardware/sam/1.6.12/platform.txt` Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory: - `~/.arduino15/packages/arduino/hardware/sam/x.yy.zz/platform.txt` #### 4. For Arduino SAMD boards ***To be able to compile, run and automatically detect and display BOARD_NAME on Arduino SAMD (Nano-33-IoT, etc) boards***, you have to copy the whole [Arduino SAMD Packages_Patches](Packages_Patches/arduino/hardware/samd/1.8.13) directory into Arduino SAMD directory (~/.arduino15/packages/arduino/hardware/samd/1.8.13). #### For core version v1.8.10+ Supposing the Arduino SAMD version is 1.8.13. Now only one file must be copied into the directory: - `~/.arduino15/packages/arduino/hardware/samd/1.8.13/platform.txt` Whenever a new version is installed, remember to copy this files into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory: - `~/.arduino15/packages/arduino/hardware/samd/x.yy.zz/platform.txt` #### For core version v1.8.9- Supposing the Arduino SAMD version is 1.8.9. These files must be copied into the directory: - `~/.arduino15/packages/arduino/hardware/samd/1.8.9/platform.txt` - ***`~/.arduino15/packages/arduino/hardware/samd/1.8.9/cores/arduino/Arduino.h`*** Whenever a new version is installed, remember to copy these files into the new version directory. For example, new version is x.yy.z These files must be copied into the directory: - `~/.arduino15/packages/arduino/hardware/samd/x.yy.z/platform.txt` - ***`~/.arduino15/packages/arduino/hardware/samd/x.yy.z/cores/arduino/Arduino.h`*** This is mandatory to fix the ***notorious Arduino SAMD compiler error***. See [Improve Arduino compatibility with the STL (min and max macro)](https://github.com/arduino/ArduinoCore-samd/pull/399) ``` ...\arm-none-eabi\include\c++\7.2.1\bits\stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2 min(const _Tp& __a, const _Tp& __b, _Compare __comp) ``` Whenever the above-mentioned compiler error issue is fixed with the new Arduino SAMD release, you don't need to copy the `Arduino.h` file anymore. #### 5. For Adafruit SAMD boards ***To be able to compile, run and automatically detect and display BOARD_NAME on Adafruit SAMD (Itsy-Bitsy M4, etc) boards***, you have to copy the whole [Adafruit SAMD Packages_Patches](Packages_Patches/adafruit/hardware/samd/1.7.10) directory into Adafruit samd directory (~/.arduino15/packages/adafruit/hardware/samd/1.7.10). Supposing the Adafruit SAMD core version is 1.7.10. This file must be copied into the directory: - `~/.arduino15/packages/adafruit/hardware/samd/1.7.10/platform.txt` - `~/.arduino15/packages/adafruit/hardware/samd/1.7.10/cores/arduino/Print.h` - `~/.arduino15/packages/adafruit/hardware/samd/1.7.10/cores/arduino/Print.cpp` Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory: - `~/.arduino15/packages/adafruit/hardware/samd/x.yy.zz/platform.txt` - `~/.arduino15/packages/adafruit/hardware/samd/x.yy.zz/cores/arduino/Print.h` - `~/.arduino15/packages/adafruit/hardware/samd/x.yy.zz/cores/arduino/Print.cpp` #### 6. For Seeeduino SAMD boards ***To be able to compile, run and automatically detect and display BOARD_NAME on Seeeduino SAMD (XIAO M0, Wio Terminal, etc) boards***, you have to copy the whole [Seeeduino SAMD Packages_Patches](Packages_Patches/Seeeduino/hardware/samd/1.8.3) directory into Seeeduino samd directory (~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3). Supposing the Seeeduino SAMD core version is 1.8.3. This file must be copied into the directory: - `~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3/platform.txt` - `~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3/cores/arduino/Arduino.h` - `~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3/cores/arduino/Print.h` - `~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3/cores/arduino/Print.cpp` Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory: - `~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/platform.txt` - `~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/cores/arduino/Arduino.h` - `~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/cores/arduino/Print.h` - `~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/cores/arduino/Print.cpp` #### 7. For STM32 boards #### 7.1 For STM32 boards to use LAN8720 To use LAN8720 on some STM32 boards - **Nucleo-144 (F429ZI, NUCLEO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG)** - **Discovery (DISCO_F746NG)** - **STM32F4 boards (BLACK_F407VE, BLACK_F407VG, BLACK_F407ZE, BLACK_F407ZG, BLACK_F407VE_Mini, DIYMORE_F407VGT, FK407M1)** you have to copy the files [stm32f4xx_hal_conf_default.h](Packages_Patches/STM32/hardware/stm32/2.3.0/system/STM32F4xx) and [stm32f7xx_hal_conf_default.h](Packages_Patches/STM32/hardware/stm32/2.3.0/system/STM32F7xx) into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/2.3.0/system) to overwrite the old files. Supposing the STM32 stm32 core version is 2.3.0. These files must be copied into the directory: - `~/.arduino15/packages/STM32/hardware/stm32/2.3.0/system/STM32F4xx/stm32f4xx_hal_conf_default.h` for STM32F4. - `~/.arduino15/packages/STM32/hardware/stm32/2.3.0/system/STM32F7xx/stm32f7xx_hal_conf_default.h` for Nucleo-144 STM32F7. Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz, theses files must be copied into the corresponding directory: - `~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/system/STM32F4xx/stm32f4xx_hal_conf_default.h` - `~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/system/STM32F7xx/stm32f7xx_hal_conf_default.h #### 7.2 For STM32 boards to use Serial1 **To use Serial1 on some STM32 boards without Serial1 definition (Nucleo-144 NUCLEO_F767ZI, Nucleo-64 NUCLEO_L053R8, etc.) boards**, you have to copy the files [STM32 variant.h](Packages_Patches/STM32/hardware/stm32/2.3.0) into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/2.3.0). You have to modify the files corresponding to your boards, this is just an illustration how to do. Supposing the STM32 stm32 core version is 2.3.0. These files must be copied into the directory: - `~/.arduino15/packages/STM32/hardware/stm32/2.3.0/variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/NUCLEO_F767ZI/variant.h` for Nucleo-144 NUCLEO_F767ZI. - `~/.arduino15/packages/STM32/hardware/stm32/2.3.0/variants/STM32L0xx/L052R(6-8)T_L053R(6-8)T_L063R8T/NUCLEO_L053R8/variant.h` for Nucleo-64 NUCLEO_L053R8. Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz, theses files must be copied into the corresponding directory: - `~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/NUCLEO_F767ZI/variant.h` - `~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/STM32L0xx/L052R(6-8)T_L053R(6-8)T_L063R8T/NUCLEO_L053R8/variant.h` #### 8. For RP2040-based boards using [Earle Philhower arduino-pico core](https://github.com/earlephilhower/arduino-pico) #### 8.1 To use BOARD_NAME **To be able to automatically detect and display BOARD_NAME on RP2040-based boards (RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040, GENERIC_RP2040, etc) boards**, you have to copy the file [RP2040 platform.txt](Packages_Patches/rp2040/hardware/rp2040/1.4.0) into rp2040 directory (~/.arduino15/packages/rp2040/hardware/rp2040/1.4.0). Supposing the rp2040 core version is 1.4.0. This file must be copied into the directory: - `~/.arduino15/packages/rp2040/hardware/rp2040/1.4.0/platform.txt` Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory: - `~/.arduino15/packages/rp2040/hardware/rp2040/x.yy.zz/platform.txt` With core after v1.5.0, this step is not necessary anymore thanks to the PR [Add -DBOARD_NAME="{build.board}" #136](https://github.com/earlephilhower/arduino-pico/pull/136). #### 8.2 To avoid compile error relating to microsecondsToClockCycles Some libraries, such as [Adafruit DHT-sensor-library](https://github.com/adafruit/DHT-sensor-library), require the definition of microsecondsToClockCycles(). **To be able to compile and run on RP2040-based boards**, you have to copy the files in [**RP2040 Arduino.h**](Packages_Patches/rp2040/hardware/rp2040/1.4.0/cores/rp2040/Arduino.h) into rp2040 directory (~/.arduino15/packages/rp2040/hardware/rp2040/1.4.0). Supposing the rp2040 core version is 1.4.0. This file must be copied to replace: - `~/.arduino15/packages/rp2040/hardware/rp2040/1.4.0/cores/rp2040/Arduino.h` Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied to replace: - `~/.arduino15/packages/rp2040/hardware/rp2040/x.yy.zz/cores/rp2040/Arduino.h` With core after v1.5.0, this step is not necessary anymore thanks to the PR [Add defs for compatibility #142](https://github.com/earlephilhower/arduino-pico/pull/142). #### 9. For Portenta_H7 boards using Arduino IDE in Linux **To be able to upload firmware to Portenta_H7 using Arduino IDE in Linux (Ubuntu, etc.)**, you have to copy the file [portenta_post_install.sh](Packages_Patches/arduino/hardware/mbed_portenta/3.1.1/portenta_post_install.sh) into mbed_portenta directory (~/.arduino15/packages/arduino/hardware/mbed_portenta/3.1.1/portenta_post_install.sh). Then run the following command using `sudo` ``` $ cd ~/.arduino15/packages/arduino/hardware/mbed_portenta/3.1.1 $ chmod 755 portenta_post_install.sh $ sudo ./portenta_post_install.sh ``` This will create the file `/etc/udev/rules.d/49-portenta_h7.rules` as follows: ``` # Portenta H7 bootloader mode UDEV rules SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="035b", GROUP="plugdev", MODE="0666" ``` Supposing the ArduinoCore-mbed core version is 3.1.1. Now only one file must be copied into the directory: - `~/.arduino15/packages/arduino/hardware/mbed_portenta/3.1.1/portenta_post_install.sh` Whenever a new version is installed, remember to copy this files into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory: - `~/.arduino15/packages/arduino/hardware/mbed_portenta/x.yy.zz/portenta_post_install.sh` #### 10. For RTL8720DN boards using AmebaD core To avoid compile error relating to PROGMEM, you have to copy the file [Realtek AmebaD core pgmspace.h](Packages_Patches/realtek/hardware/AmebaD/3.1.3/cores/arduino/avr/pgmspace.h) into Realtek AmebaD directory (~/.arduino15/packages/realtek/hardware/AmebaD/3.1.3/cores/arduino/avr/pgmspace.h). Supposing the Realtek AmebaD core version is 3.1.3. This file must be copied into the directory: - `~/.arduino15/packages/realtek/hardware/AmebaD/3.1.3/cores/arduino/avr/pgmspace.h` Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory: - `~/.arduino15/packages/realtek/hardware/AmebaD/x.yy.zz/cores/arduino/avr/pgmspace.h` #### 11. For SAMD21 and SAMD51 boards using ArduinoCore-fab-sam core To avoid compile error relating to SAMD21/SAMD51, you have to copy the file [ArduinoCore-fab-sam core pgmspace.h](Packages_Patches/Fab_SAM_Arduino/hardware/samd/1.6.18-alpha2/boards.txt) into `ArduinoCore-fab-sam` samd directory (~/.arduino15/packages/Fab_SAM_Arduino/hardware/samd/1.6.18-alpha2/boards.txt). Supposing the `ArduinoCore-fab-sam` samd core version is 1.6.18-alpha2. This file must be copied into the directory: - `~/.arduino15/packages/Fab_SAM_Arduino/hardware/samd/1.6.18-alpha2/boards.txt` Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory: - `~/.arduino15/packages/Fab_SAM_Arduino/hardware/samd/x.yy.zz/boards.txt` #### 12. For Seeeduino RP2040 boards ***To be able to compile, run and automatically detect and display BOARD_NAME on Seeeduino RP2040 (XIAO RP2040, Wio RP2040 Mini) boards***, you have to copy the whole [Seeeduino RP2040 Packages_Patches](Packages_Patches/Seeeduino/hardware/rp2040/2.7.2) directory into Seeeduino samd directory (~/.arduino15/packages/Seeeduino/hardware/rp2040/2.7.2). Supposing the Seeeduino SAMD core version is 2.7.2. This file must be copied into the directory: - `~/.arduino15/packages/Seeeduino/hardware/rp2040/2.7.2/boards.txt` - `~/.arduino15/packages/Seeeduino/hardware/rp2040/2.7.2/variants/Seeed_XIAO_RP2040/pins_arduino.h` Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory: - `~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/boards.txt` - `~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/variants/Seeed_XIAO_RP2040/pins_arduino.h` --- --- ### Libraries' Patches #### 1. ArduinoSTL for AVR boards To fix compile error for AVR boards, the `Libraries' Patches` for [`ArduinoSTL library`](https://github.com/mike-matera/ArduinoSTL) must be used. Just copy the following file into the [`ArduinoSTL library`](https://github.com/mike-matera/ArduinoSTL) directory to overwrite the old files: - [new_handler.cpp](LibraryPatches/ArduinoSTL/src/new_handler.cpp) --- --- ### Examples: 1. [WiFiMulti](examples/WiFiMulti) 2. [WiFiMulti_RP2040W](examples/WiFiMulti_RP2040W) **New** --- --- ### Example [WiFiMulti](examples/WiFiMulti) #### 1. File [WiFiMulti.ino](examples/WiFiMulti/WiFiMulti.ino) https://github.com/khoih-prog/WiFiMulti_Generic/blob/b9531554ef8f8a42c4268fe12e57655fecee570c/examples/WiFiMulti/WiFiMulti.ino#L21-L222 #### 2. File [defines.h](examples/WiFiMulti/defines.h) https://github.com/khoih-prog/WiFiMulti_Generic/blob/b9531554ef8f8a42c4268fe12e57655fecee570c/examples/WiFiMulti/defines.h#L1-L531 --- --- ### Debug Terminal Output Samples #### 1. WiFiMulti on RASPBERRY_PI_PICO The following are debug terminal output when running example [WiFiMulti](examples/WiFiMulti) on `RASPBERRY_PI_PICO` with ESP8266_AT shield using [RP2040 arduino-pico core](https://github.com/earlephilhower/arduino-pico) and [WiFiEspAT](https://github.com/jandrassy/WiFiEspAT) library #### 1.1 First time => OK ``` Starting WiFiMulti on RASPBERRY_PI_PICO WiFiMulti_Generic v1.2.2 WiFi shield init done [WFM] [addAP] add SSID: HueNet1 [WFM] [addAP] add SSID: HueNet2 Connecting WiFi... [WFM] [run] Scan done [WFM] [run] Number of Networks found: 6 ============================================================== [WFM] Unknown => # 0 , Channel: 10 [WFM] 4D:AB:D3:E0:38:60 [WFM] SSID: HueNet , RSSI: -24 , Secured: y ============================================================== [WFM] Known => # 1 , Channel: 2 [WFM] A5:F4:94:74:7F:68 [WFM] SSID: HueNet1 , RSSI: -33 , Secured: y ============================================================== [WFM] Unknown => # 2 , Channel: 11 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNetTek , RSSI: -33 , Secured: y ============================================================== [WFM] Known => # 3 , Channel: 4 [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , RSSI: -56 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 1 [WFM] A6:2:69:6D:2C:E8 [WFM] SSID: SmartRG-02a2 , RSSI: -66 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 0 [WFM] 1:BF:BA:9C:80:85 [WFM] SSID: -71 , RSSI: 8 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] A5:F4:94:74:7F:68 [WFM] SSID: HueNet1 , Channel: 2 , Best dB: -33 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet1 , IP: 192.168.2.109 WiFi connected, IP address: 192.168.2.109 ``` #### 1.2 Lost WiFi => Scan and auto-reconnect ``` WiFi lost. Trying to scan and reconnect [WFM] [run] Scan done [WFM] [run] Number of Networks found: 6 ============================================================== [WFM] Unknown => # 0 , Channel: 10 [WFM] 4D:AB:D3:E0:38:60 [WFM] SSID: HueNet , RSSI: -26 , Secured: y ============================================================== [WFM] Unknown => # 1 , Channel: 11 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNetTek , RSSI: -38 , Secured: y ============================================================== [WFM] Known => # 2 , Channel: 4 [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , RSSI: -57 , Secured: y ============================================================== [WFM] Unknown => # 3 , Channel: 5 [WFM] 8A:20:11:2A:C3:E4 [WFM] SSID: DECO-5655 , RSSI: -70 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 1 [WFM] A6:2:69:6D:2C:E8 [WFM] SSID: SmartRG-02a2 , RSSI: -72 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 1 [WFM] 16:49:8A:35:94:C0 [WFM] SSID: Access , RSSI: -77 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , Channel: 4 , Best dB: -57 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet2 , IP: 192.168.2.109 [WFM] WiFi connected after time: 1 [WFM] SSID: HueNet2 ,RSSI= -65 [WFM] IP address: 192.168.2.109 ``` --- #### 2. WiFiMulti on MBED RaspberryPi Pico The following are debug terminal output when running example [WiFiMulti](examples/WiFiMulti) on `RaspberryPi Pico` with ESP8266_AT shield using [ArduinoCore-mbed mbed_rp2040 core](https://github.com/arduino/ArduinoCore-mbed) and [WiFiEspAT](https://github.com/jandrassy/WiFiEspAT) library #### 2.1 First time => OK ``` Starting WiFiMulti on RaspberryPi Pico WiFiMulti_Generic v1.2.2 WiFi shield init done [WFM] [addAP] add SSID: HueNet1 [WFM] [addAP] add SSID: HueNet2 Connecting WiFi... [WFM] [run] Scan done [WFM] [run] Number of Networks found: 6 ============================================================== [WFM] Unknown => # 0 , Channel: 10 [WFM] 4D:AB:D3:E0:38:60 [WFM] SSID: HueNet , RSSI: -23 , Secured: y ============================================================== [WFM] Known => # 1 , Channel: 2 [WFM] A5:F4:94:74:7F:68 [WFM] SSID: HueNet1 , RSSI: -35 , Secured: y ============================================================== [WFM] Unknown => # 2 , Channel: 11 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNetTek , RSSI: -35 , Secured: y ============================================================== [WFM] Known => # 3 , Channel: 4 [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , RSSI: -57 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 1 [WFM] A6:2:69:6D:2C:E8 [WFM] SSID: SmartRG-02a2 , RSSI: -64 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 3 [WFM] 15:F8:3F:80:9F:E8 [WFM] SSID: Linksys00043 , RSSI: -71 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] A5:F4:94:74:7F:68 [WFM] SSID: HueNet1 , Channel: 2 , Best dB: -35 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet1 , IP: 192.168.2.109 WiFi connected, IP address: 192.168.2.109 ``` #### 2.2 Lost WiFi => Scan and auto-reconnect ``` WiFi lost. Trying to scan and reconnect [WFM] [run] Scan done [WFM] [run] Number of Networks found: 6 ============================================================== [WFM] Unknown => # 0 , Channel: 10 [WFM] 4D:AB:D3:E0:38:60 [WFM] SSID: HueNet , RSSI: -25 , Secured: y ============================================================== [WFM] Unknown => # 1 , Channel: 11 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNetTek , RSSI: -42 , Secured: y ============================================================== [WFM] Known => # 2 , Channel: 4 [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , RSSI: -60 , Secured: y ============================================================== [WFM] Unknown => # 3 , Channel: 1 [WFM] A6:2:69:6D:2C:E8 [WFM] SSID: SmartRG-02a2 , RSSI: -69 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 0 [WFM] 5:8A:20:11:2A:C3 [WFM] SSID: -74 , RSSI: 0 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 5 [WFM] 8A:20:11:2A:C3:E4 [WFM] SSID: DECO-5655 , RSSI: -75 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , Channel: 4 , Best dB: -60 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet2 , IP: 192.168.2.109 [WFM] WiFi connected after time: 1 [WFM] SSID: HueNet2 ,RSSI= -63 [WFM] IP address: 192.168.2.109 ``` --- #### 3. WiFiMulti on Nano RP2040 Connect The following are debug terminal output when running example [WiFiMulti](examples/WiFiMulti) on `Nano RP2040 Connect` with WiFiNINA shield using [ArduinoCore-mbed mbed_rp2040 core](https://github.com/arduino/ArduinoCore-mbed) and [WiFiNINA_Generic](https://github.com/khoih-prog/WiFiNINA_Generic) library #### 3.1 First time => OK ``` Starting WiFiMulti on Nano RP2040 Connect WiFiMulti_Generic v1.2.2 [WFM] [addAP] add SSID: HueNet1 [WFM] [addAP] add SSID: HueNet2 Connecting WiFi... [WFM] [run] Scan done [WFM] [run] Number of Networks found: 10 ============================================================== [WFM] Unknown => # 0 , Channel: 10 [WFM] 4D:AB:D3:E0:38:60 [WFM] SSID: HueNet , RSSI: -19 , Secured: y ============================================================== [WFM] Known => # 1 , Channel: 2 [WFM] A5:F4:94:74:7F:68 [WFM] SSID: HueNet1 , RSSI: -23 , Secured: y ============================================================== [WFM] Known => # 2 , Channel: 4 [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , RSSI: -49 , Secured: y ============================================================== [WFM] Unknown => # 3 , Channel: 1 [WFM] A6:2:69:6D:2C:E8 [WFM] SSID: SmartRG-02a2 , RSSI: -72 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 11 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNetTek , RSSI: -75 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 1 [WFM] 16:49:8A:35:94:C0 [WFM] SSID: Access , RSSI: -79 , Secured: y ============================================================== [WFM] Unknown => # 6 , Channel: 1 [WFM] D5:1C:15:BC:FA:EE [WFM] SSID: ESP151CD5 , RSSI: -79 , Secured: y ============================================================== [WFM] Unknown => # 7 , Channel: 3 [WFM] EA:73:DC:D2:B4:F2 [WFM] SSID: FishBowl , RSSI: -81 , Secured: y ============================================================== [WFM] Unknown => # 8 , Channel: 5 [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: DECO-5655 , RSSI: -82 , Secured: y ============================================================== [WFM] Unknown => # 9 , Channel: 5 [WFM] 28:ED:8:2E:8F:68 [WFM] SSID: rogers786 , RSSI: -82 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] A5:F4:94:74:7F:68 [WFM] SSID: HueNet1 , Channel: 2 , Best dB: -23 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet1 , IP: 192.168.2.105 WiFi connected, IP address: 192.168.2.105 ``` #### 3.2 Lost WiFi => Scan and auto-reconnect ``` WiFi lost. Trying to scan and reconnect [WFM] [run] Scan done [WFM] [run] Number of Networks found: 10 ============================================================== [WFM] Unknown => # 0 , Channel: 10 [WFM] 4D:AB:D3:E0:38:60 [WFM] SSID: HueNet , RSSI: -22 , Secured: y ============================================================== [WFM] Unknown => # 1 , Channel: 11 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNetTek , RSSI: -32 , Secured: y ============================================================== [WFM] Known => # 2 , Channel: 4 [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , RSSI: -53 , Secured: y ============================================================== [WFM] Unknown => # 3 , Channel: 1 [WFM] D5:1C:15:BC:FA:EE [WFM] SSID: ESP151CD5 , RSSI: -77 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 1 [WFM] A6:2:69:6D:2C:E8 [WFM] SSID: SmartRG-02a2 , RSSI: -80 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 1 [WFM] 16:49:8A:35:94:C0 [WFM] SSID: Access , RSSI: -81 , Secured: y ============================================================== [WFM] Unknown => # 6 , Channel: 5 [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: DECO-5655 , RSSI: -83 , Secured: y ============================================================== [WFM] Unknown => # 7 , Channel: 5 [WFM] E6:D:11:2A:C3:EA [WFM] SSID: Guest5655 , RSSI: -83 , Secured: y ============================================================== [WFM] Unknown => # 8 , Channel: 5 [WFM] 8A:20:11:2A:C3:E4 [WFM] SSID: DECO-5655 , RSSI: -84 , Secured: y ============================================================== [WFM] Unknown => # 9 , Channel: 11 [WFM] 58:9:B:2E:8F:68 [WFM] SSID: Rogers 786 , RSSI: -85 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , Channel: 4 , Best dB: -53 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet2 , IP: 192.168.2.105 [WFM] WiFi connected after time: 1 [WFM] SSID: HueNet2 ,RSSI= -47 [WFM] IP address: 192.168.2.105 ``` --- #### 4. WiFiMulti on NANO_RP2040_CONNECT The following are debug terminal output when running example [WiFiMulti](examples/WiFiMulti) on `NANO_RP2040_CONNECT` with ESP8266_AT shield using [RP2040 arduino-pico core](https://github.com/earlephilhower/arduino-pico) and [WiFiNINA_Generic](https://github.com/khoih-prog/WiFiNINA_Generic) library #### 4.1 First time => OK ``` Starting WiFiMulti on NANO_RP2040_CONNECT WiFiMulti_Generic v1.2.2 [WFM] [addAP] add SSID: HueNet1 [WFM] [addAP] add SSID: HueNet2 Connecting WiFi... [WFM] [run] Scan done [WFM] [run] Number of Networks found: 10 ============================================================== [WFM] Known => # 0 , Channel: 2 [WFM] A5:F4:94:74:7F:68 [WFM] SSID: HueNet1 , RSSI: -17 , Secured: y ============================================================== [WFM] Unknown => # 1 , Channel: 10 [WFM] 4D:AB:D3:E0:38:60 [WFM] SSID: HueNet , RSSI: -21 , Secured: y ============================================================== [WFM] Unknown => # 2 , Channel: 11 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNetTek , RSSI: -31 , Secured: y ============================================================== [WFM] Unknown => # 3 , Channel: 4 [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , RSSI: -50 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 1 [WFM] A6:2:69:6D:2C:E8 [WFM] SSID: SmartRG-02a2 , RSSI: -72 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 1 [WFM] D5:1C:15:BC:FA:EE [WFM] SSID: ESP151CD5 , RSSI: -83 , Secured: y ============================================================== [WFM] Unknown => # 6 , Channel: 3 [WFM] EA:73:DC:D2:B4:F2 [WFM] SSID: FishBowl , RSSI: -83 , Secured: y ============================================================== [WFM] Unknown => # 7 , Channel: 6 [WFM] 42:8E:4D:42:5E:F8 [WFM] SSID: El khoury , RSSI: -85 , Secured: y ============================================================== [WFM] Unknown => # 8 , Channel: 6 [WFM] 7:9:F8:1:F2:40 [WFM] SSID: BELL627 , RSSI: -87 , Secured: y ============================================================== [WFM] Unknown => # 9 , Channel: 11 [WFM] A0:E9:61:BF:92:F4 [WFM] SSID: house , RSSI: -88 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] A5:F4:94:74:7F:68 [WFM] SSID: HueNet1 , Channel: 2 , Best dB: -17 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet1 , IP: 192.168.2.105 WiFi connected, IP address: 192.168.2.105 ``` #### 4.2 Lost WiFi => Scan and auto-reconnect ``` WiFi lost. Trying to scan and reconnect [WFM] [run] Scan done [WFM] [run] Number of Networks found: 10 ============================================================== [WFM] Unknown => # 0 , Channel: 10 [WFM] 4D:AB:D3:E0:38:60 [WFM] SSID: HueNet , RSSI: -22 , Secured: y ============================================================== [WFM] Unknown => # 1 , Channel: 11 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNetTek , RSSI: -32 , Secured: y ============================================================== [WFM] Known => # 2 , Channel: 4 [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , RSSI: -53 , Secured: y ============================================================== [WFM] Unknown => # 3 , Channel: 1 [WFM] D5:1C:15:BC:FA:EE [WFM] SSID: ESP151CD5 , RSSI: -77 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 1 [WFM] A6:2:69:6D:2C:E8 [WFM] SSID: SmartRG-02a2 , RSSI: -80 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 1 [WFM] 16:49:8A:35:94:C0 [WFM] SSID: Access , RSSI: -81 , Secured: y ============================================================== [WFM] Unknown => # 6 , Channel: 5 [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: DECO-5655 , RSSI: -83 , Secured: y ============================================================== [WFM] Unknown => # 7 , Channel: 5 [WFM] E6:D:11:2A:C3:EA [WFM] SSID: Guest5655 , RSSI: -83 , Secured: y ============================================================== [WFM] Unknown => # 8 , Channel: 5 [WFM] 8A:20:11:2A:C3:E4 [WFM] SSID: DECO-5655 , RSSI: -84 , Secured: y ============================================================== [WFM] Unknown => # 9 , Channel: 11 [WFM] 58:9:B:2E:8F:68 [WFM] SSID: Rogers 786 , RSSI: -85 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , Channel: 4 , Best dB: -53 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet2 , IP: 192.168.2.105 [WFM] WiFi connected after time: 1 [WFM] SSID: HueNet2 ,RSSI= -47 [WFM] IP address: 192.168.2.105 ``` --- #### 5. WiFiMulti on ESP8266_NODEMCU_ESP12E The following are debug terminal output when running example [WiFiMulti](examples/WiFiMulti) on `ESP8266_NODEMCU_ESP12E` #### 5.1 First time => OK ``` Starting WiFiMulti on ESP8266_NODEMCU_ESP12E WiFiMulti_Generic v1.2.2 [WFM] [APlistAdd] Add SSID: SSID = HueNet1 [WFM] [APlistAdd] Add SSID: SSID = HueNet2 Connecting WiFi... [WFM] Connecting saved WiFi WiFi connected, IP address: 192.168.2.103 ``` #### 5.2 Lost WiFi => Scan and auto-reconnect ``` WiFi lost. Trying to scan and reconnect [WFM] Start scan [WFM] Sorted indices: [WFM] Known networks index = 3 [WFM] Connecting SSID = HueNet2 [WFM] WiFi connected after time: 1 [WFM] SSID: HueNet2 ,RSSI= -56 [WFM] Channel: 4 ,IP address: 192.168.2.103 ``` --- #### 6. WiFiMulti on ESP32C3_DEV The following are debug terminal output when running example [WiFiMulti](examples/WiFiMulti) on `ESP32C3_DEV` #### 6.1 First time => OK ``` Starting WiFiMulti on ESP32C3_DEV WiFiMulti_Generic v1.2.2 [WFM] [addAP] add SSID: HueNet1 [WFM] [addAP] add SSID: HueNet2 Connecting WiFi... [WFM] [run] Scan done [WFM] [run] Number of Networks found: 23 ============================================================== [WFM] Unknown => # 0 , Channel: 10 [WFM] 60:38:E0:D3:AB:4D [WFM] SSID: HueNet , RSSI: -24 , Secured: y ============================================================== [WFM] Known => # 1 , Channel: 2 [WFM] 68:7F:74:94:F4:A5 [WFM] SSID: HueNet1 , RSSI: -40 , Secured: y ============================================================== [WFM] Known => # 2 , Channel: 4 [WFM] 60:38:E0:E2:EB:E1 [WFM] SSID: HueNet2 , RSSI: -45 , Secured: y ============================================================== [WFM] Unknown => # 3 , Channel: 11 [WFM] 3C:90:66:E3:9:F1 [WFM] SSID: HueNetTek , RSSI: -47 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 1 [WFM] E8:2C:6D:69:2:A6 [WFM] SSID: SmartRG-02a2 , RSSI: -64 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 6 [WFM] F8:5E:42:4D:8E:42 [WFM] SSID: El khoury , RSSI: -67 , Secured: y ============================================================== [WFM] Unknown => # 6 , Channel: 3 [WFM] E8:9F:80:3F:F8:15 [WFM] SSID: Linksys00043 , RSSI: -71 , Secured: y ============================================================== [WFM] Unknown => # 7 , Channel: 5 [WFM] E4:C3:2A:11:D:E6 [WFM] SSID: DECO-5655 , RSSI: -72 , Secured: y ============================================================== [WFM] Unknown => # 8 , Channel: 5 [WFM] EA:C3:2A:11:D:E6 [WFM] SSID: Guest5655 , RSSI: -72 , Secured: y ============================================================== [WFM] Unknown => # 9 , Channel: 5 [WFM] 68:8F:2E:8:ED:28 [WFM] SSID: rogers786 , RSSI: -72 , Secured: y ============================================================== [WFM] Unknown => # 10 , Channel: 11 [WFM] 68:8F:2E:B:9:58 [WFM] SSID: Rogers 786 , RSSI: -75 , Secured: y ============================================================== [WFM] Unknown => # 11 , Channel: 5 [WFM] E4:C3:2A:11:20:8A [WFM] SSID: DECO-5655 , RSSI: -76 , Secured: y ============================================================== [WFM] Unknown => # 12 , Channel: 1 [WFM] C0:94:35:8A:49:16 [WFM] SSID: Access , RSSI: -77 , Secured: y ============================================================== [WFM] Unknown => # 13 , Channel: 1 [WFM] EE:FA:BC:15:1C:D5 [WFM] SSID: ESP151CD5 , RSSI: -80 , Secured: y ============================================================== [WFM] Unknown => # 14 , Channel: 3 [WFM] F0:B4:D2:EC:73:EA [WFM] SSID: FishTank , RSSI: -80 , Secured: y ============================================================== [WFM] Unknown => # 15 , Channel: 3 [WFM] 70:8B:CD:C8:B0:F0 [WFM] SSID: ericnetwork , RSSI: -81 , Secured: y ============================================================== [WFM] Unknown => # 16 , Channel: 1 [WFM] F8:5E:42:A2:94:B7 [WFM] SSID: Offline5 , RSSI: -82 , Secured: y ============================================================== [WFM] Unknown => # 17 , Channel: 1 [WFM] 54:64:D9:31:39:A4 [WFM] SSID: VIRGIN874 , RSSI: -82 , Secured: y ============================================================== [WFM] Unknown => # 18 , Channel: 3 [WFM] F2:B4:D2:DC:73:EA [WFM] SSID: FishBowl , RSSI: -82 , Secured: y ============================================================== [WFM] Unknown => # 19 , Channel: 11 [WFM] F4:92:BF:61:E9:A0 [WFM] SSID: house , RSSI: -84 , Secured: y ============================================================== [WFM] Unknown => # 20 , Channel: 5 [WFM] EA:C3:2A:11:20:E [WFM] SSID: Guest5655 , RSSI: -85 , Secured: y ============================================================== [WFM] Unknown => # 21 , Channel: 11 [WFM] 80:D0:4A:48:F2:DA [WFM] SSID: Jessie , RSSI: -86 , Secured: y ============================================================== [WFM] Unknown => # 22 , Channel: 11 [WFM] 98:42:65:FF:22:F6 [WFM] SSID: BELL042 , RSSI: -87 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] 68:7F:74:94:F4:A5 [WFM] SSID: HueNet1 , Channel: 2 , Best dB: -40 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet1 , IP: 192.168.2.86 [WFM] [run] MAC: 68:7F:74:94:F4:A5 , Channel: 2 WiFi connected, IP address: 192.168.2.86 ``` #### 6.2 Lost WiFi => Scan and auto-reconnect ``` WiFi lost. Trying to scan and reconnect [WFM] [run] delete old wifi config... [WFM] [run] start scan WiFi not connected! WiFi lost. Trying to scan and reconnect WiFi not connected! WiFi lost. Trying to scan and reconnect WiFi not connected! WiFi lost. Trying to scan and reconnect WiFi not connected! WiFi lost. Trying to scan and reconnect WiFi not connected! WiFi lost. Trying to scan and reconnect WiFi not connected! WiFi lost. Trying to scan and reconnect [WFM] [run] Scan done [WFM] [run] Number of Networks found: 16 ============================================================== [WFM] Unknown => # 0 , Channel: 10 [WFM] 60:38:E0:D3:AB:4D [WFM] SSID: HueNet , RSSI: -26 , Secured: y ============================================================== [WFM] Unknown => # 1 , Channel: 11 [WFM] 3C:90:66:E3:9:F1 [WFM] SSID: HueNetTek , RSSI: -39 , Secured: y ============================================================== [WFM] Known => # 2 , Channel: 4 [WFM] 60:38:E0:E2:EB:E1 [WFM] SSID: HueNet2 , RSSI: -45 , Secured: y ============================================================== [WFM] Unknown => # 3 , Channel: 1 [WFM] E8:2C:6D:69:2:A6 [WFM] SSID: SmartRG-02a2 , RSSI: -68 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 3 [WFM] E8:9F:80:3F:F8:15 [WFM] SSID: Linksys00043 , RSSI: -69 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 6 [WFM] F8:5E:42:4D:8E:42 [WFM] SSID: El khoury , RSSI: -69 , Secured: y ============================================================== [WFM] Unknown => # 6 , Channel: 11 [WFM] 68:8F:2E:B:9:58 [WFM] SSID: Rogers 786 , RSSI: -72 , Secured: y ============================================================== [WFM] Unknown => # 7 , Channel: 1 [WFM] C0:94:35:8A:49:16 [WFM] SSID: Access , RSSI: -77 , Secured: y ============================================================== [WFM] Unknown => # 8 , Channel: 1 [WFM] EE:FA:BC:15:1C:D5 [WFM] SSID: ESP151CD5 , RSSI: -78 , Secured: y ============================================================== [WFM] Unknown => # 9 , Channel: 1 [WFM] F8:5E:42:A2:94:B7 [WFM] SSID: Offline5 , RSSI: -81 , Secured: y ============================================================== [WFM] Unknown => # 10 , Channel: 1 [WFM] 54:64:D9:31:39:A4 [WFM] SSID: VIRGIN874 , RSSI: -82 , Secured: y ============================================================== [WFM] Unknown => # 11 , Channel: 11 [WFM] 80:D0:4A:48:F2:DA [WFM] SSID: Jessie , RSSI: -83 , Secured: y ============================================================== [WFM] Unknown => # 12 , Channel: 11 [WFM] F4:92:BF:61:E9:A0 [WFM] SSID: house , RSSI: -84 , Secured: y ============================================================== [WFM] Unknown => # 13 , Channel: 11 [WFM] 98:42:65:FF:22:F6 [WFM] SSID: BELL042 , RSSI: -85 , Secured: y ============================================================== [WFM] Unknown => # 14 , Channel: 11 [WFM] 60:32:B1:52:59:B6 [WFM] SSID: TP-Link_59B6 , RSSI: -87 , Secured: y ============================================================== [WFM] Unknown => # 15 , Channel: 6 [WFM] FA:8F:CA:8E:DF:36 [WFM] SSID: Living Room Speaker 2.o , RSSI: -88 , Secured: n ============================================================== [run] Connecting BSSID: [WFM] 60:38:E0:E2:EB:E1 [WFM] SSID: HueNet2 , Channel: 4 , Best dB: -45 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet2 , IP: 192.168.2.86 [WFM] [run] MAC: 60:38:E0:E2:EB:E1 , Channel: 4 ``` --- #### 7. WiFiMulti on ESP32S3_DEV The following are debug terminal output when running example [WiFiMulti](examples/WiFiMulti) on `ESP32S3_DEV` #### 7.1 First time => OK ``` Starting WiFiMulti on ESP32S3_DEV WiFiMulti_Generic v1.2.2 [WFM] [addAP] add SSID: HueNet1 [WFM] [addAP] add SSID: HueNet2 Connecting WiFi... [WFM] [run] Scan done [WFM] [run] Number of Networks found: 29 ============================================================== [WFM] Known => # 0 , Channel: 2 [WFM] 68:7F:74:94:F4:A5 [WFM] SSID: HueNet1 , RSSI: -27 , Secured: y ============================================================== [WFM] Unknown => # 1 , Channel: 10 [WFM] 60:38:E0:D3:AB:4D [WFM] SSID: HueNet , RSSI: -28 , Secured: y ============================================================== [WFM] Unknown => # 2 , Channel: 11 [WFM] 3C:90:66:E3:9:F1 [WFM] SSID: HueNetTek , RSSI: -43 , Secured: y ============================================================== [WFM] Known => # 3 , Channel: 4 [WFM] 60:38:E0:E2:EB:E1 [WFM] SSID: HueNet2 , RSSI: -51 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 1 [WFM] EE:FA:BC:15:1C:D5 [WFM] SSID: ESP151CD5 , RSSI: -69 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 1 [WFM] E8:2C:6D:69:2:A6 [WFM] SSID: SmartRG-02a2 , RSSI: -72 , Secured: y ============================================================== [WFM] Unknown => # 6 , Channel: 11 [WFM] 68:8F:2E:B:9:58 [WFM] SSID: Rogers 786 , RSSI: -75 , Secured: y ============================================================== [WFM] Unknown => # 7 , Channel: 3 [WFM] E8:9F:80:3F:F8:15 [WFM] SSID: Linksys00043 , RSSI: -76 , Secured: y ============================================================== [WFM] Unknown => # 8 , Channel: 5 [WFM] E4:C3:2A:11:D:E6 [WFM] SSID: DECO-5655 , RSSI: -76 , Secured: y ============================================================== [WFM] Unknown => # 9 , Channel: 5 [WFM] EA:C3:2A:11:D:E6 [WFM] SSID: Guest5655 , RSSI: -76 , Secured: y ============================================================== [WFM] Unknown => # 10 , Channel: 5 [WFM] E4:C3:2A:11:20:8A [WFM] SSID: DECO-5655 , RSSI: -78 , Secured: y ============================================================== [WFM] Unknown => # 11 , Channel: 5 [WFM] EA:C3:2A:11:20:8A [WFM] SSID: Guest5655 , RSSI: -78 , Secured: y ============================================================== [WFM] Unknown => # 12 , Channel: 1 [WFM] C0:94:35:8A:49:16 [WFM] SSID: Access , RSSI: -79 , Secured: y ============================================================== [WFM] Unknown => # 13 , Channel: 5 [WFM] 68:8F:2E:8:ED:28 [WFM] SSID: rogers786 , RSSI: -80 , Secured: y ============================================================== [WFM] Unknown => # 14 , Channel: 6 [WFM] F8:5E:42:4D:8E:42 [WFM] SSID: El khoury , RSSI: -81 , Secured: y ============================================================== [WFM] Unknown => # 15 , Channel: 11 [WFM] F4:92:BF:61:E9:A0 [WFM] SSID: house , RSSI: -84 , Secured: y ============================================================== [WFM] Unknown => # 16 , Channel: 1 [WFM] 3A:B7:F1:BB:17:B1 [WFM] SSID: Waterhome , RSSI: -85 , Secured: y ============================================================== [WFM] Unknown => # 17 , Channel: 3 [WFM] F0:B4:D2:EC:73:EA [WFM] SSID: FishTank , RSSI: -85 , Secured: y ============================================================== [WFM] Unknown => # 18 , Channel: 1 [WFM] 3A:B7:F1:BA:9E:C9 [WFM] SSID: Waterhome , RSSI: -87 , Secured: y ============================================================== [WFM] Unknown => # 19 , Channel: 11 [WFM] 4C:71:D:97:4D:C0 [WFM] SSID: WirelessMississauga , RSSI: -87 , Secured: n ============================================================== [WFM] Unknown => # 20 , Channel: 1 [WFM] 3A:B7:F1:BB:45:9 [WFM] SSID: Waterhome , RSSI: -88 , Secured: y ============================================================== [WFM] Unknown => # 21 , Channel: 1 [WFM] 54:64:D9:31:39:A4 [WFM] SSID: VIRGIN874 , RSSI: -90 , Secured: y ============================================================== [WFM] Unknown => # 22 , Channel: 6 [WFM] F4:92:BF:61:EA:FC [WFM] SSID: Access 2.0 , RSSI: -90 , Secured: y ============================================================== [WFM] Unknown => # 23 , Channel: 6 [WFM] F8:5E:42:BA:CE:CA [WFM] SSID: labib , RSSI: -90 , Secured: y ============================================================== [WFM] Unknown => # 24 , Channel: 11 [WFM] AC:20:2E:6:7:28 [WFM] SSID: Jasmine , RSSI: -90 , Secured: y ============================================================== [WFM] Unknown => # 25 , Channel: 5 [WFM] E4:C3:2A:11:20:E [WFM] SSID: DECO-5655 , RSSI: -91 , Secured: y ============================================================== [WFM] Unknown => # 26 , Channel: 6 [WFM] 40:F2:1:F8:9:7 [WFM] SSID: BELL627 , RSSI: -93 , Secured: y ============================================================== [WFM] Unknown => # 27 , Channel: 11 [WFM] 70:4F:57:14:C4:15 [WFM] SSID: SamLAN , RSSI: -93 , Secured: y ============================================================== [WFM] Unknown => # 28 , Channel: 11 [WFM] 18:D6:C7:23:A4:B2 [WFM] SSID: JJ Realestate Investments , RSSI: -93 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] 68:7F:74:94:F4:A5 [WFM] SSID: HueNet1 , Channel: 2 , Best dB: -27 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet1 , IP: 192.168.2.83 [WFM] [run] MAC: 68:7F:74:94:F4:A5 , Channel: 2 WiFi connected, IP address: 192.168.2.83 ``` #### 7.2 Lost WiFi => Scan and auto-reconnect ``` WiFi lost. Trying to scan and reconnect [WFM] [run] Scan done [WFM] [run] Number of Networks found: 18 ============================================================== [WFM] Unknown => # 0 , Channel: 10 [WFM] 60:38:E0:D3:AB:4D [WFM] SSID: HueNet , RSSI: -26 , Secured: y ============================================================== [WFM] Known => # 1 , Channel: 2 [WFM] 68:7F:74:94:F4:A5 [WFM] SSID: HueNet1 , RSSI: -27 , Secured: y ============================================================== [WFM] Unknown => # 2 , Channel: 11 [WFM] 3C:90:66:E3:9:F1 [WFM] SSID: HueNetTek , RSSI: -39 , Secured: y ============================================================== [WFM] Known => # 3 , Channel: 4 [WFM] 60:38:E0:E2:EB:E1 [WFM] SSID: HueNet2 , RSSI: -49 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 1 [WFM] EE:FA:BC:15:1C:D5 [WFM] SSID: ESP151CD5 , RSSI: -72 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 1 [WFM] E8:2C:6D:69:2:A6 [WFM] SSID: SmartRG-02a2 , RSSI: -74 , Secured: y ============================================================== [WFM] Unknown => # 6 , Channel: 11 [WFM] 68:8F:2E:B:9:58 [WFM] SSID: Rogers 786 , RSSI: -75 , Secured: y ============================================================== [WFM] Unknown => # 7 , Channel: 3 [WFM] E8:9F:80:3F:F8:15 [WFM] SSID: Linksys00043 , RSSI: -76 , Secured: y ============================================================== [WFM] Unknown => # 8 , Channel: 6 [WFM] F8:5E:42:4D:8E:42 [WFM] SSID: El khoury , RSSI: -79 , Secured: y ============================================================== [WFM] Unknown => # 9 , Channel: 3 [WFM] F2:B4:D2:DC:73:EA [WFM] SSID: FishBowl , RSSI: -80 , Secured: y ============================================================== [WFM] Unknown => # 10 , Channel: 3 [WFM] 70:8B:CD:C8:B0:F0 [WFM] SSID: ericnetwork , RSSI: -81 , Secured: y ============================================================== [WFM] Unknown => # 11 , Channel: 1 [WFM] C0:94:35:8A:49:16 [WFM] SSID: Access , RSSI: -83 , Secured: y ============================================================== [WFM] Unknown => # 12 , Channel: 11 [WFM] F4:92:BF:61:E9:A0 [WFM] SSID: house , RSSI: -84 , Secured: y ============================================================== [WFM] Unknown => # 13 , Channel: 11 [WFM] 98:42:65:FF:22:F6 [WFM] SSID: BELL042 , RSSI: -86 , Secured: y ============================================================== [WFM] Unknown => # 14 , Channel: 6 [WFM] 8C:6A:8D:4A:D5:7C [WFM] SSID: AdeyemiHome , RSSI: -87 , Secured: y ============================================================== [WFM] Unknown => # 15 , Channel: 6 [WFM] F4:92:BF:61:EA:FC [WFM] SSID: Access 2.0 , RSSI: -89 , Secured: y ============================================================== [WFM] Unknown => # 16 , Channel: 6 [WFM] 98:52:4A:74:56:AF [WFM] SSID: Waterhome , RSSI: -90 , Secured: y ============================================================== [WFM] Unknown => # 17 , Channel: 1 [WFM] 28:BD:89:F0:A1:AD [WFM] SSID: Home , RSSI: -92 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] 68:7F:74:94:F4:A5 [WFM] SSID: HueNet1 , Channel: 2 , Best dB: -27 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet1 , IP: 192.168.2.83 [WFM] [run] MAC: 68:7F:74:94:F4:A5 , Channel: 2 [WFM] WiFi connected after time: 1 [WFM] SSID: HueNet1 ,RSSI= -31 [WFM] Channel: 2 ,IP address: 192.168.2.83 ``` --- #### 8. WiFiMulti on Arduino AVR Mega2560 The following are debug terminal output when running example [WiFiMulti](examples/WiFiMulti) on `Arduino AVR Mega2560` #### 8.1 First time => OK ``` Starting WiFiMulti on Arduino AVR Mega2560/ADK WiFiMulti_Generic v1.2.2 WiFi shield init done [WFM] [addAP] add SSID: HueNet1 [WFM] [addAP] add SSID: HueNet2 Connecting WiFi... [WFM] [run] Scan done [WFM] [run] Number of Networks found: 6 ============================================================== [WFM] Unknown => # 0 , Channel: 1 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNetTek , RSSI: -37 , Secured: y ============================================================== [WFM] Unknown => # 1 , Channel: 10 [WFM] 4D:AB:D3:E0:38:60 [WFM] SSID: HueNet , RSSI: -37 , Secured: y ============================================================== [WFM] Known => # 2 , Channel: 4 [WFM] A5:F4:94:74:7F:68 [WFM] SSID: HueNet1 , RSSI: -39 , Secured: y ============================================================== [WFM] Known => # 3 , Channel: 4 [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , RSSI: -60 , Secured: y ============================================================== [WFM] Unknown => # 4 , Channel: 3 [WFM] EA:73:EC:D2:B4:F0 [WFM] SSID: FishTank , RSSI: -86 , Secured: y ============================================================== [WFM] Unknown => # 5 , Channel: 1 [WFM] A6:2:69:6D:2C:E8 [WFM] SSID: SmartRG-02a2 , RSSI: -86 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] A5:F4:94:74:7F:68 [WFM] SSID: HueNet1 , Channel: 4 , Best dB: -39 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet1 , IP: 192.168.2.80 WiFi connected, IP address: 192.168.2.80 HHHHHHH ``` #### 8.2 Lost WiFi => Scan and auto-reconnect ``` WiFi lost. Call connectMultiWiFi in loop WiFi lost. Trying to scan and reconnect [WFM] [run] Scan done [WFM] [run] Number of Networks found: 4 ============================================================== [WFM] Unknown => # 0 , Channel: 10 [WFM] 4D:AB:D3:E0:38:60 [WFM] SSID: HueNet , RSSI: -33 , Secured: y ============================================================== [WFM] Unknown => # 1 , Channel: 1 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNetTek , RSSI: -42 , Secured: y ============================================================== [WFM] Known => # 2 , Channel: 4 [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , RSSI: -63 , Secured: y ============================================================== [WFM] Unknown => # 3 , Channel: 5 [WFM] 8A:20:11:2A:C3:E4 [WFM] SSID: DECO-5655 , RSSI: -92 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] E1:EB:E2:E0:38:60 [WFM] SSID: HueNet2 , Channel: 4 , Best dB: -63 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet2 , IP: 192.168.2.80 [WFM] WiFi connected after time: 1 [WFM] SSID: HueNet2 ,RSSI= -64 [WFM] IP address: 192.168.2.80 H ``` --- #### 9. WiFiMulti on RTL8720DN The following are debug terminal output when running example [WiFiMulti](examples/WiFiMulti) on `RTL8720DN` #### 9.1 First time => OK ``` Starting WiFiMulti on RTL8720DN WiFiMulti_Generic v1.2.2 [WFM] [addAP] add SSID: HueNet1 [WFM] [addAP] add SSID: HueNet2 Connecting WiFi... interface 0 is initialized interface 1 is initialized Initializing WIFI ... WIFI initialized [WFM] [run] Scan done [WFM] [run] Number of Networks found: 24 ============================================================== [WFM] Unknown => # 0 [WFM] SSID: HueNet_5G , RSSI: -21 , Secured: y ============================================================== [WFM] Unknown => # 1 [WFM] SSID: HueNet , RSSI: -27 , Secured: y ============================================================== [WFM] Known => # 2 [WFM] SSID: HueNet1 , RSSI: -28 , Secured: y ============================================================== [WFM] Unknown => # 3 [WFM] SSID: HueNetTek_5G , RSSI: -33 , Secured: y ============================================================== [WFM] Unknown => # 4 [WFM] SSID: HueNetTek , RSSI: -44 , Secured: y ============================================================== [WFM] Known => # 5 [WFM] SSID: HueNet2 , RSSI: -45 , Secured: y ============================================================== [WFM] Unknown => # 6 [WFM] SSID: HueNet2_5G , RSSI: -56 , Secured: y ============================================================== [WFM] Unknown => # 7 [WFM] SSID: El khoury , RSSI: -74 , Secured: y ============================================================== [WFM] Unknown => # 8 [WFM] SSID: , RSSI: -75 , Secured: y ============================================================== [WFM] Unknown => # 9 [WFM] SSID: , RSSI: -75 , Secured: y ============================================================== [WFM] Unknown => # 10 [WFM] SSID: Rogers 786 , RSSI: -82 , Secured: y ============================================================== [WFM] Unknown => # 11 [WFM] SSID: , RSSI: -84 , Secured: y ============================================================== [WFM] Unknown => # 12 [WFM] SSID: El khoury , RSSI: -85 , Secured: y ============================================================== [WFM] Unknown => # 13 [WFM] SSID: Access , RSSI: -86 , Secured: y ============================================================== [WFM] Unknown => # 14 [WFM] SSID: FishTank , RSSI: -86 , Secured: y ============================================================== [WFM] Unknown => # 15 [WFM] SSID: , RSSI: -86 , Secured: y ============================================================== [WFM] Unknown => # 16 [WFM] SSID: ESP151CD5 , RSSI: -87 , Secured: y ============================================================== [WFM] Unknown => # 17 [WFM] SSID: , RSSI: -87 , Secured: y ============================================================== [WFM] Unknown => # 18 [WFM] SSID: BELL042 , RSSI: -88 , Secured: y ============================================================== [WFM] Unknown => # 19 [WFM] SSID: , RSSI: -88 , Secured: y ============================================================== [WFM] Unknown => # 20 [WFM] SSID: house , RSSI: -90 , Secured: y ============================================================== [WFM] Unknown => # 21 [WFM] SSID: WirelessMississauga , RSSI: -90 , Secured: n ============================================================== [WFM] Unknown => # 22 [WFM] SSID: JJ Realestate Investments , RSSI: -95 , Secured: y ============================================================== [WFM] Unknown => # 23 [WFM] SSID: TP-Link_59B6 , RSSI: -96 , Secured: y ============================================================== [WFM] [run] Connecting SSID: HueNet1 , Best dB: -28 RTL8721D[Driver]: set ssid [HueNet1] RTL8721D[Driver]: rtw_set_wpa_ie[1160]: AuthKeyMgmt = 0x2 RTL8721D[Driver]: rtw_restruct_sec_ie[4225]: no pmksa cached RTL8721D[Driver]: start auth to 68:7f:74:94:f4:a5 RTL8721D[Driver]: auth alg = 2 RTL8721D[Driver]: OnAuthClient:algthm = 0, seq = 2, status = 0, sae_msg_len = 11 RTL8721D[Driver]: auth success, start assoc RTL8721D[Driver]: association success(res=1) RTL8721D[Driver]: ClientSendEAPOL[1624]: no use cache pmksa RTL8721D[Driver]: ClientSendEAPOL[1624]: no use cache pmksa RTL8721D[Driver]: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) RTL8721D[Driver]: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1 Interface 0 IP address : 192.168.2.78[WFM] [run] Connecting done. [WFM] [run] SSID: HueNet1 , IP: 192.168.2.78 WiFi connected, IP address: 192.168.2.78 HHH ``` #### 9.2 Lost WiFi => Scan and auto-reconnect ``` RTL8721D[Driver]: no beacon for a long time, disconnect or roaming WiFi lost. Call connectMultiWiFi in loop WiFi lost. Trying to scan and reconnect [WFM] [run] Scan done [WFM] [run] Number of Networks found: 23 ============================================================== [WFM] Unknown => # 0 [WFM] SSID: HueNet_5G , RSSI: -21 , Secured: y ============================================================== [WFM] Unknown => # 1 [WFM] SSID: HueNet , RSSI: -26 , Secured: y ============================================================== [WFM] Unknown => # 2 [WFM] SSID: HueNetTek_5G , RSSI: -31 , Secured: y ============================================================== [WFM] Unknown => # 3 [WFM] SSID: HueNetTek , RSSI: -35 , Secured: y ============================================================== [WFM] Known => # 4 [WFM] SSID: HueNet2 , RSSI: -45 , Secured: y ============================================================== [WFM] Unknown => # 5 [WFM] SSID: HueNet2_5G , RSSI: -55 , Secured: y ============================================================== [WFM] Unknown => # 6 [WFM] SSID: SmartRG-02a2 , RSSI: -74 , Secured: y ============================================================== [WFM] Unknown => # 7 [WFM] SSID: Linksys00043 , RSSI: -76 , Secured: y ============================================================== [WFM] Unknown => # 8 [WFM] SSID: , RSSI: -79 , Secured: y ============================================================== [WFM] Unknown => # 9 [WFM] SSID: ESP151CD5 , RSSI: -81 , Secured: y ============================================================== [WFM] Unknown => # 10 [WFM] SSID: FishTank , RSSI: -84 , Secured: y ============================================================== [WFM] Unknown => # 11 [WFM] SSID: Guest5655 , RSSI: -84 , Secured: y ============================================================== [WFM] Unknown => # 12 [WFM] SSID: , RSSI: -84 , Secured: y ============================================================== [WFM] Unknown => # 13 [WFM] SSID: SmartRG-02a2-5G , RSSI: -85 , Secured: y ============================================================== [WFM] Unknown => # 14 [WFM] SSID: , RSSI: -86 , Secured: y ============================================================== [WFM] Unknown => # 15 [WFM] SSID: El khoury , RSSI: -87 , Secured: y ============================================================== [WFM] Unknown => # 16 [WFM] SSID: , RSSI: -88 , Secured: y ============================================================== [WFM] Unknown => # 17 [WFM] SSID: , RSSI: -88 , Secured: y ============================================================== [WFM] Unknown => # 18 [WFM] SSID: , RSSI: -88 , Secured: y ============================================================== [WFM] Unknown => # 19 [WFM] SSID: , RSSI: -90 , Secured: n ============================================================== [WFM] Unknown => # 20 [WFM] SSID: , RSSI: -91 , Secured: y ============================================================== [WFM] Unknown => # 21 [WFM] SSID: JAC DM , RSSI: -95 , Secured: y ============================================================== [WFM] Unknown => # 22 [WFM] SSID: Home , RSSI: -99 , Secured: y ============================================================== [WFM] [run] Connecting SSID: HueNet2 , Best dB: -45 RTL8721D[Driver]: set ssid [HueNet2] RTL8721D[Driver]: rtw_set_wpa_ie[1160]: AuthKeyMgmt = 0x2 RTL8721D[Driver]: rtw_restruct_sec_ie[4225]: no pmksa cached RTL8721D[Driver]: start auth to 60:38:e0:e2:eb:e1 RTL8721D[Driver]: auth alg = 2 RTL8721D[Driver]: OnAuthClient:algthm = 0, seq = 2, status = 0, sae_msg_len = 0 RTL8721D[Driver]: auth success, start assoc RTL8721D[Driver]: association success(res=1) RTL8721D[Driver]: ClientSendEAPOL[1624]: no use cache pmksa RTL8721D[Driver]: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) RTL8721D[Driver]: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1 Interface 0 IP address : 192.168.2.78[WFM] [run] Connecting done. [WFM] [run] SSID: HueNet2 , IP: 192.168.2.78 [WFM] WiFi connected after time: 1 [WFM] SSID: HueNet2 ,RSSI= -47 [WFM] IP address: 192.168.2.78 HHH ``` --- #### 10. WiFiMulti on PORTENTA_H7_M7 The following are debug terminal output when running example [WiFiMulti](examples/WiFiMulti) on `PORTENTA_H7_M7` #### 10.1 First time => OK ``` Starting WiFiMulti on PORTENTA_H7_M7 WiFiMulti_Generic v1.2.2 [WFM] [addAP] add SSID: HueNet1 [WFM] [addAP] add SSID: HueNet2 Connecting WiFi... [WFM] [run] Scan done [WFM] [run] Number of Networks found: 6 ============================================================== [WFM] Unknown => # 0 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNetTek , RSSI: -32 , Secured: y ============================================================== [WFM] Unknown => # 1 [WFM] F1:9:E3:66:90:3C [WFM] SSID: SmartRG-02a2 , RSSI: -77 , Secured: y ============================================================== [WFM] Known => # 2 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNet1 , RSSI: -38 , Secured: y ============================================================== [WFM] Unknown => # 3 [WFM] F1:9:E3:66:90:3C [WFM] SSID: Linksys00043 , RSSI: -77 , Secured: y ============================================================== [WFM] Known => # 4 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNet2 , RSSI: -55 , Secured: y ============================================================== [WFM] Unknown => # 5 [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNet , RSSI: -33 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] F1:9:E3:66:90:3C [WFM] SSID: HueNet1 , Best dB: -38 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet1 , IP: 192.168.2.77 WiFi connected, IP address: 192.168.2.77 ``` #### 10.2 Lost WiFi => Scan and auto-reconnect ``` WiFi lost. Trying to scan and reconnect [WFM] [run] Scan done [WFM] [run] Number of Networks found: 9 ============================================================== [WFM] Known => # 0 [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: HueNet2 , RSSI: -54 , Secured: y ============================================================== [WFM] Unknown => # 1 [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: Guest5655 , RSSI: -86 , Secured: y ============================================================== [WFM] Unknown => # 2 [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: DECO-5655 , RSSI: -86 , Secured: y ============================================================== [WFM] Unknown => # 3 [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: El khoury , RSSI: -84 , Secured: y ============================================================== [WFM] Unknown => # 4 [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: , RSSI: -82 , Secured: y ============================================================== [WFM] Unknown => # 5 [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: , RSSI: -83 , Secured: y ============================================================== [WFM] Unknown => # 6 [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: HueNet , RSSI: -42 , Secured: y ============================================================== [WFM] Unknown => # 7 [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: HueNetTek , RSSI: -37 , Secured: y ============================================================== [WFM] Unknown => # 8 [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: SmartRG-02a2 , RSSI: -76 , Secured: y ============================================================== [run] Connecting BSSID: [WFM] E6:D:11:2A:C3:E4 [WFM] SSID: HueNet2 , Best dB: -54 [WFM] [run] Connecting done. [WFM] [run] SSID: HueNet2 , IP: 192.168.2.77 [WFM] WiFi connected after time: 1 [WFM] SSID: HueNet2 ,RSSI= -53 [WFM] IP address: 192.168.2.77 ``` --- #### 11. WiFiMulti on RP2040W The following are debug terminal output when running example [WiFiMulti_RP2040W](examples/WiFiMulti_RP2040W) on `RASPBERRY_PI_PICO_W using CYW43439 WiFi` #### 10.1 First time => OK ``` Starting WiFiMulti on RASPBERRY_PI_PICO_W WiFiMulti_Generic v1.2.2 [WFM] [addAP] add SSID: HueNet1 [WFM] [addAP] add SSID: HueNet2 [WFM] [addAP] add SSID: ssid_from_AP_1 [WFM] [addAP] add SSID: ssid_from_AP_2 [WFM] [addAP] add SSID: ssid_from_AP_3 Connecting WiFi... [WFM] [run] Scan done [WFM] [run] Number of Networks found: 15 [run] Connecting BSSID: [WFM] EE:EE:EE:EE:EE:EE [WFM] SSID: HueNet1 , Best dB: -62 [WFM] [run] Connecting done. WiFi connected, SSID: HueNet1, IP address: 192.168.2.180 [WFM] Client connected, Local IP = 192.168.2.180 H[WFM] Client connected, Local IP = 192.168.2.180 H[WFM] Connection failed. Local IP = (IP unset) WiFi lost. Call connectMultiWiFi in loop WiFi lost. Trying to scan and reconnect [WFM] [run] Scan done [WFM] [run] Number of Networks found: 9 [run] Connecting BSSID: [WFM] EE:EE:EE:EE:EE:EE [WFM] SSID: HueNet2 , Best dB: -62 [WFM] [run] Connecting done. [WFM] WiFi connected after time: 1 [WFM] SSID: HueNet2 ,RSSI= 0 [WFM] IP address: 192.168.2.180 H[WFM] Client connected, Local IP = 192.168.2.180 ``` #### 10.2 Lost WiFi => Scan and auto-reconnect ``` H[WFM] Connection failed. Local IP = (IP unset) WiFi lost. Call connectMultiWiFi in loop WiFi lost. Trying to scan and reconnect [WFM] [run] Scan done [WFM] [run] Number of Networks found: 9 [run] Connecting BSSID: [WFM] EE:EE:EE:EE:EE:EE [WFM] SSID: HueNet2 , Best dB: -62 [WFM] [run] Connecting done. [WFM] WiFi connected after time: 1 [WFM] SSID: HueNet2 ,RSSI= 0 [WFM] IP address: 192.168.2.180 H[WFM] Client connected, Local IP = 192.168.2.180 H[WFM] Connection failed. Local IP = (IP unset) ``` --- --- ### Debug Debug is enabled by default on Serial. Debug Level from 0 to 4. To disable, change the _WIFIMULTI_LOGLEVEL_ to 0 ```cpp // Use this to output debug msgs to Serial #define DEBUG_WIFI_MULTI_GENERIC_PORT Serial // Use this to disable all output debug msgs // Debug Level from 0 to 4 #define _WIFIMULTI_LOGLEVEL_ 2 ``` --- ## Troubleshooting If you get compilation errors, more often than not, you may need to install a newer version of the board's core, applying Libraries' Patches, Packages' Patches or this library latest version. --- --- ### Issues ### Submit issues to: [WiFiMulti_Generic issues](https://github.com/khoih-prog/WiFiMulti_Generic/issues) --- --- ### TO DO 1. Bug Searching and Killing 2. Add support to **megaAVR** nboards using [`MegaCoreX megaAVR core`](https://github.com/MCUdude/MegaCoreX/releases) ### DONE 1. Add support to Arduino SAMD21, Adafruit SAMD21/SAMD51, Seeeduino SAMD21/SAMD51 2. Add support to nRF52-based boards 3. Add support to SAM DUE. 4. Add support to all STM32F/L/H/G/WB/MP1. 5. Add support to WiFiNINA using [**WiFiNINA_Generic library**](https://github.com/khoih-prog/WiFiNINA_Generic) 6. Add support to [`WiFiEspAT library`](https://github.com/jandrassy/WiFiEspAT). 7. Add support to **Arduino Nano RP2040 Connect** using [**Arduino mbed OS for Nano boards**](https://github.com/arduino/ArduinoCore-mbed). 8. Add support to RP2040-based boards, such as **RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040**, using [**Earle Philhower's arduino-pico** core](https://github.com/earlephilhower/arduino-pico). 9. Add support to RP2040-based boards, such as **RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040**, using [**Arduino-mbed mbed_rp2040** core](https://github.com/arduino/ArduinoCore-mbed). 10. Optimize library code and examples by using **reference-passing instead of value-passing**. 11. Add support to ESP32-based boards including new **ESP32-S3** and **ESP32_C3** 12. Add support to ESP8266-based boards 13. Add support to **Portenta_H7 using Murata WiFi** 14. Add support to **RTL8720DN using built-in 2.4GHz or 5GHz WiFi** with Realtek `AmebaD` core 15. Add support to Arduino SAMD using `WiFi101` (MKR1000, MKR1010, etc.) 16. Add support to Seeed XIAO RP2020, SAMD using `WiFi101`, `WiFiNINA_Generic` or `WiFiEspAT` 17. Add support to Arduino megaAVR boards with Arduino core (UNO WiFi Rev2 using `WiFi101`, Nano Every using `WiFi101`, `WiFiNINA_Generic` or `WiFiEspAT`) 18. Add support to CO2 Ampel SAMD board using `WiFi101`, `WiFiNINA_Generic` or `WiFiEspAT` 19. Add support to STM32 boards with `STM32duino Maple` core using `WiFi101`, `WiFiNINA_Generic` or `WiFiEspAT` 20. Add support to Sparkfun SAMD board using `WiFi101`, `WiFiNINA_Generic` or `WiFiEspAT` 21. Add support to Industruino SAMD using `WiFi101`, `WiFiNINA_Generic` or `WiFiEspAT` 22. Add support to Tlera Corp STM32WB boards (Firefly-WB55RG, Nucleo-WB55RG, etc.) using `WiFi101`, `WiFiNINA_Generic` or `WiFiEspAT` 23. Add support to Maixduino boards using `WiFi101`, `WiFiNINA_Generic` or `WiFiEspAT` 24. Add support to Arduino, Sparkfun, Adafruit, etc. AVR boards (Mega, 32U4, etc.). To use `LibraryPatches` for `ArduinoSTL` library 25. Add support to RASPBERRY_PI_PICO_W using CYW43439 WiFi with [**Earle Philhower's arduino-pico core** v2.4.0+](https://github.com/earlephilhower/arduino-pico) 26. Workaround for RP2040W WiFi.status() bug using ping() --- --- ### Contributions and Thanks Many thanks for everyone for bug reporting, new feature suggesting, testing and contributing to the development of this library. 1. Based on the [Ivan Grokhotkov's ESP8266 WiFi](https://github.com/esp8266/Arduino/tree/master/libraries/ESP8266WiFi) library. 2. Based on the [Me No Dev's ESP32 WiFi](https://github.com/espressif/arduino-esp32/tree/master/libraries/WiFi) library. 3. Thanks to [Juraj Andrássy](https://github.com/jandrassy) to request in [WiFiMulti? #17](https://github.com/khoih-prog/WiFiNINA_Generic/discussions/17) and the [WiFiEspAT](https://github.com/jandrassy/WiFiEspAT) library
igrr
⭐️ Ivan Grokhotkov
 me-no-dev
⭐️ Me No Dev
 jandrassy
⭐️ Juraj Andrássy
--- ### Contributing If you want to contribute to this project: - Report bugs and errors - Ask for enhancements - Create issues and pull requests - Tell other people about this library --- ### License - The library is licensed under [GPLv3](https://github.com/khoih-prog/WiFiMulti_Generic/blob/main/LICENSE) --- ## Copyright Copyright 2022- Khoi Hoang