// Created by: Peter KURNEV
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#ifndef _BOPAlgo_Tools_HeaderFile
#define _BOPAlgo_Tools_HeaderFile

#include "Standard.hxx"
#include "Standard_DefineAlloc.hxx"

#include "NCollection_IndexedDataMap.hxx"
#include "Standard_Integer.hxx"
#include "NCollection_List.hxx"
#include "BOPDS_PaveBlock.hxx"
#include "Standard_Handle.hxx"
#include "BOPDS_PDS.hxx"
#include "NCollection_BaseAllocator.hxx"
#include "Bnd_Box.hxx"
#include "TopoDS_Shape.hxx"
#include "TopTools_ShapeMapHasher.hxx"
#include "NCollection_DataMap.hxx"
#include "NCollection_Map.hxx"
#include "Message_ProgressRange.hxx"

class BOPDS_PaveBlock;
class BOPDS_CommonBlock;
class IntTools_Context;
class TopoDS_Shape;

//! Provides tools used in the intersection part of Boolean operations
class BOPAlgo_Tools
{
public:
  //! Makes the chains of the connected elements from the given convexity map
  template <class TheMap, class TheList>
  static void MakeBlocks(const TheMap&                                 theMILI,
                         TheList&                                      theMBlocks,
                         const occ::handle<NCollection_BaseAllocator>& theAllocator)
  {
    NCollection_Map<typename TheMap::key_type, typename TheMap::hasher> aMFence;
    int                                                                 i, aNb = theMILI.Extent();
    for (i = 1; i <= aNb; ++i)
    {
      const typename TheMap::key_type& n = theMILI.FindKey(i);
      if (!aMFence.Add(n))
        continue;
      //
      // Start the chain
      typename TheList::value_type& aChain =
        theMBlocks.Append(typename TheList::value_type(theAllocator));
      aChain.Append(n);
      // Look for connected elements
      typename TheList::value_type::Iterator aItLChain(aChain);
      for (; aItLChain.More(); aItLChain.Next())
      {
        const typename TheMap::key_type&    n1  = aItLChain.Value();
        const typename TheList::value_type& aLI = theMILI.FindFromKey(n1);
        // Add connected elements into the chain
        typename TheList::value_type::Iterator aItLI(aLI);
        for (; aItLI.More(); aItLI.Next())
        {
          const typename TheMap::key_type& n2 = aItLI.Value();
          if (aMFence.Add(n2))
          {
            aChain.Append(n2);
          }
        }
      }
    }
  }

  //! Fills the map with the connected entities
  template <class TheType, class TheMap>
  static void FillMap(const TheType&                                n1,
                      const TheType&                                n2,
                      TheMap&                                       theMILI,
                      const occ::handle<NCollection_BaseAllocator>& theAllocator)
  {
    typename TheMap::value_type* pList1 = theMILI.ChangeSeek(n1);
    if (!pList1)
    {
      pList1 = &theMILI(theMILI.Add(n1, NCollection_List<TheType>(theAllocator)));
    }
    pList1->Append(n2);
    //
    typename TheMap::value_type* pList2 = theMILI.ChangeSeek(n2);
    if (!pList2)
    {
      pList2 = &theMILI(theMILI.Add(n2, typename TheMap::value_type(theAllocator)));
    }
    pList2->Append(n1);
  }

  Standard_EXPORT static void FillMap(
    const occ::handle<BOPDS_PaveBlock>&                                              thePB1,
    const int                                                                        theF,
    NCollection_IndexedDataMap<occ::handle<BOPDS_PaveBlock>, NCollection_List<int>>& theMILI,
    const occ::handle<NCollection_BaseAllocator>&                                    theAllocator);

  //! Create Common Blocks from the groups of pave blocks of <theMBlocks>
  //! connection map.
  Standard_EXPORT static void PerformCommonBlocks(
    NCollection_IndexedDataMap<occ::handle<BOPDS_PaveBlock>,
                               NCollection_List<occ::handle<BOPDS_PaveBlock>>>& theMBlocks,
    const occ::handle<NCollection_BaseAllocator>&                               theAllocator,
    BOPDS_PDS&                                                                  theDS,
    const occ::handle<IntTools_Context>& theContext = occ::handle<IntTools_Context>());

  //! Create Common Blocks on faces using the PB->Faces connection map <theMBlocks>.
  Standard_EXPORT static void PerformCommonBlocks(
    const NCollection_IndexedDataMap<occ::handle<BOPDS_PaveBlock>, NCollection_List<int>>&
                                                  theMBlocks,
    const occ::handle<NCollection_BaseAllocator>& theAllocator,
    BOPDS_PDS&                                    pDS,
    const occ::handle<IntTools_Context>&          theContext = occ::handle<IntTools_Context>());

  Standard_EXPORT static double ComputeToleranceOfCB(
    const occ::handle<BOPDS_CommonBlock>& theCB,
    const BOPDS_PDS                       theDS,
    const occ::handle<IntTools_Context>&  theContext);

  //! Creates planar wires from the given edges.
  //! The input edges are expected to be planar. And for the performance
  //! sake the method does not check if the edges are really planar.
  //! Thus, the result wires will also be not planar if the input edges are not planar.
  //! The edges may be not shared, but the resulting wires will be sharing the
  //! coinciding parts and intersecting parts.
  //! The output wires may be non-manifold and contain free and multi-connected vertices.
  //! Parameters:
  //! <theEdges> - input edges;
  //! <theWires> - output wires;
  //! <theShared> - boolean flag which defines whether the input edges are already
  //!               shared or have to be intersected;
  //! <theAngTol> - the angular tolerance which will be used for distinguishing
  //!               the planes in which the edges are located. Default value is
  //!               1.e-8 which is used for intersection of planes in IntTools_FaceFace.
  //! Method returns the following error statuses:
  //! 0 - in case of success (at least one wire has been built);
  //! 1 - in case there are no edges in the given shape;
  //! 2 - sharing of the edges has failed.
  Standard_EXPORT static int EdgesToWires(const TopoDS_Shape& theEdges,
                                          TopoDS_Shape&       theWires,
                                          const bool          theShared = false,
                                          const double        theAngTol = 1.e-8);

  //! Creates planar faces from given planar wires.
  //! The method does not check if the wires are really planar.
  //! The input wires may be non-manifold but should be shared.
  //! The wires located in the same planes and included into other wires will create
  //! holes in the faces built from outer wires.
  //! The tolerance values of the input shapes may be modified during the operation
  //! due to projection of the edges on the planes for creation of 2D curves.
  //! Parameters:
  //! <theWires> - the given wires;
  //! <theFaces> - the output faces;
  //! <theAngTol> - the angular tolerance for distinguishing the planes in which
  //!               the wires are located. Default value is 1.e-8 which is used
  //!               for intersection of planes in IntTools_FaceFace.
  //! Method returns TRUE in case of success, i.e. at least one face has been built.
  Standard_EXPORT static bool WiresToFaces(const TopoDS_Shape& theWires,
                                           TopoDS_Shape&       theFaces,
                                           const double        theAngTol = 1.e-8);

  //! Finds chains of intersecting vertices
  Standard_EXPORT static void IntersectVertices(
    const NCollection_IndexedDataMap<TopoDS_Shape, double, TopTools_ShapeMapHasher>& theVertices,
    const double                                                                     theFuzzyValue,
    NCollection_List<NCollection_List<TopoDS_Shape>>&                                theChains);

  //! Classifies the faces <theFaces> relatively solids <theSolids>.
  //! The IN faces for solids are stored into output data map <theInParts>.
  //!
  //! The map <theSolidsIF> contains INTERNAL faces of the solids, to avoid
  //! their additional classification.
  //!
  //! Firstly, it checks the intersection of bounding boxes of the shapes.
  //! If the Box is not stored in the <theShapeBoxMap> map, it builds the box.
  //! If the bounding boxes of solid and face are interfering the classification is performed.
  //!
  //! It is assumed that all faces and solids are already intersected and
  //! do not have any geometrically coinciding parts without topological
  //! sharing of these parts
  Standard_EXPORT static void ClassifyFaces(
    const NCollection_List<TopoDS_Shape>&                                      theFaces,
    const NCollection_List<TopoDS_Shape>&                                      theSolids,
    const bool                                                                 theRunParallel,
    occ::handle<IntTools_Context>&                                             theContext,
    NCollection_IndexedDataMap<TopoDS_Shape,
                               NCollection_List<TopoDS_Shape>,
                               TopTools_ShapeMapHasher>&                       theInParts,
    const NCollection_DataMap<TopoDS_Shape, Bnd_Box, TopTools_ShapeMapHasher>& theShapeBoxMap =
      NCollection_DataMap<TopoDS_Shape, Bnd_Box, TopTools_ShapeMapHasher>(),
    const NCollection_DataMap<TopoDS_Shape,
                              NCollection_List<TopoDS_Shape>,
                              TopTools_ShapeMapHasher>& theSolidsIF =
      NCollection_DataMap<TopoDS_Shape, NCollection_List<TopoDS_Shape>, TopTools_ShapeMapHasher>(),
    const Message_ProgressRange& theRange = Message_ProgressRange());

  //! Classifies the given parts relatively the given solids and
  //! fills the solids with the parts classified as INTERNAL.
  //!
  //! @param theSolids  - The solids to put internals to
  //! @param theParts   - The parts to classify relatively solids
  //! @param theImages  - Possible images of the parts that has to be classified
  //! @param theContext - cached geometrical tools to speed-up classifications
  Standard_EXPORT static void FillInternals(
    const NCollection_List<TopoDS_Shape>&               theSolids,
    const NCollection_List<TopoDS_Shape>&               theParts,
    const NCollection_DataMap<TopoDS_Shape,
                              NCollection_List<TopoDS_Shape>,
                              TopTools_ShapeMapHasher>& theImages,
    const occ::handle<IntTools_Context>&                theContext);

  //! Computes the transformation needed to move the objects
  //! to the given point to increase the quality of computations.
  //! Returns true if the objects are located far from the given point
  //! (relatively given criteria), false otherwise.
  //! @param theBox1 the AABB of the first object
  //! @param theBox2 the AABB of the second object
  //! @param theTrsf the computed transformation
  //! @param thePoint the Point to compute transformation to
  //! @param theCriteria the Criteria to check whether thranformation is required
  Standard_EXPORT static bool TrsfToPoint(const Bnd_Box& theBox1,
                                          const Bnd_Box& theBox2,
                                          gp_Trsf&       theTrsf,
                                          const gp_Pnt&  thePoint    = gp_Pnt(0.0, 0.0, 0.0),
                                          const double   theCriteria = 1.e+5);
};

#endif // _BOPAlgo_Tools_HeaderFile