// Created on: 1993-02-15
// Created by: Laurent BOURESCHE
// Copyright (c) 1993-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#ifndef _BRepSweep_Rotation_HeaderFile
#define _BRepSweep_Rotation_HeaderFile

#include "Standard.hxx"
#include "Standard_DefineAlloc.hxx"
#include "Standard_Handle.hxx"

#include "gp_Ax1.hxx"
#include "BRepSweep_Trsf.hxx"
#include "Standard_Boolean.hxx"
#include "TopAbs_Orientation.hxx"
class TopoDS_Shape;
class Sweep_NumShape;
class TopLoc_Location;

//! Provides an algorithm to build object by
//! Rotation sweep.
class BRepSweep_Rotation : public BRepSweep_Trsf
{
public:
  DEFINE_STANDARD_ALLOC

  //! Creates a topology by rotating <S> around A with the
  //! angle D.
  Standard_EXPORT BRepSweep_Rotation(const TopoDS_Shape&    S,
                                     const Sweep_NumShape&  N,
                                     const TopLoc_Location& L,
                                     const gp_Ax1&          A,
                                     const double           D,
                                     const bool             C);

  //! Builds the vertex addressed by [aGenV,aDirV], with its
  //! geometric part, but without subcomponents.
  Standard_EXPORT TopoDS_Shape MakeEmptyVertex(const TopoDS_Shape&   aGenV,
                                               const Sweep_NumShape& aDirV) override;

  //! Builds the edge addressed by [aGenV,aDirE], with its
  //! geometric part, but without subcomponents.
  Standard_EXPORT TopoDS_Shape MakeEmptyDirectingEdge(const TopoDS_Shape&   aGenV,
                                                      const Sweep_NumShape& aDirE) override;

  //! Builds the edge addressed by [aGenE,aDirV], with its
  //! geometric part, but without subcomponents.
  Standard_EXPORT TopoDS_Shape MakeEmptyGeneratingEdge(const TopoDS_Shape&   aGenE,
                                                       const Sweep_NumShape& aDirV) override;

  //! Sets the parameters of the new vertex on the new
  //! face. The new face and new vertex where generated
  //! from aGenF, aGenV and aDirV .
  Standard_EXPORT void SetParameters(const TopoDS_Shape&   aNewFace,
                                     TopoDS_Shape&         aNewVertex,
                                     const TopoDS_Shape&   aGenF,
                                     const TopoDS_Shape&   aGenV,
                                     const Sweep_NumShape& aDirV) override;

  //! Sets the parameter of the new vertex on the new
  //! edge. The new edge and new vertex where generated
  //! from aGenV aDirE, and aDirV.
  Standard_EXPORT void SetDirectingParameter(const TopoDS_Shape&   aNewEdge,
                                             TopoDS_Shape&         aNewVertex,
                                             const TopoDS_Shape&   aGenV,
                                             const Sweep_NumShape& aDirE,
                                             const Sweep_NumShape& aDirV) override;

  //! Sets the parameter of the new vertex on the new
  //! edge. The new edge and new vertex where generated
  //! from aGenE, aGenV and aDirV .
  Standard_EXPORT void SetGeneratingParameter(const TopoDS_Shape&   aNewEdge,
                                              TopoDS_Shape&         aNewVertex,
                                              const TopoDS_Shape&   aGenE,
                                              const TopoDS_Shape&   aGenV,
                                              const Sweep_NumShape& aDirV) override;

  //! Builds the face addressed by [aGenS,aDirS], with
  //! its geometric part, but without subcomponents. The
  //! couple aGenS, aDirS can be a "generating face and
  //! a directing vertex" or "a generating edge and a
  //! directing edge".
  Standard_EXPORT TopoDS_Shape MakeEmptyFace(const TopoDS_Shape&   aGenS,
                                             const Sweep_NumShape& aDirS) override;

  //! Sets the PCurve for a new edge on a new face. The
  //! new edge and the new face were generated using
  //! aGenF, aGenE and aDirV.
  Standard_EXPORT void SetPCurve(const TopoDS_Shape&      aNewFace,
                                 TopoDS_Shape&            aNewEdge,
                                 const TopoDS_Shape&      aGenF,
                                 const TopoDS_Shape&      aGenE,
                                 const Sweep_NumShape&    aDirV,
                                 const TopAbs_Orientation orien) override;

  //! Sets the PCurve for a new edge on a new face. The
  //! new edge and the new face were generated using
  //! aGenE, aDirE and aDirV.
  Standard_EXPORT void SetGeneratingPCurve(const TopoDS_Shape&      aNewFace,
                                           TopoDS_Shape&            aNewEdge,
                                           const TopoDS_Shape&      aGenE,
                                           const Sweep_NumShape&    aDirE,
                                           const Sweep_NumShape&    aDirV,
                                           const TopAbs_Orientation orien) override;

  //! Sets the PCurve for a new edge on a new face. The
  //! new edge and the new face were generated using
  //! aGenE, aDirE and aGenV.
  Standard_EXPORT void SetDirectingPCurve(const TopoDS_Shape&      aNewFace,
                                          TopoDS_Shape&            aNewEdge,
                                          const TopoDS_Shape&      aGenE,
                                          const TopoDS_Shape&      aGenV,
                                          const Sweep_NumShape&    aDirE,
                                          const TopAbs_Orientation orien) override;

  //! Returns the Orientation of the shell in the solid
  //! generated by the face aGenS with the edge aDirS.
  //! It is REVERSED if the surface is swept in the
  //! direction of the normal.
  Standard_EXPORT TopAbs_Orientation DirectSolid(const TopoDS_Shape&   aGenS,
                                                 const Sweep_NumShape& aDirS) override;

  //! Returns true if aNewSubShape (addressed by
  //! aSubGenS and aDirS) must be added in aNewShape
  //! (addressed by aGenS and aDirS).
  Standard_EXPORT bool GGDShapeIsToAdd(const TopoDS_Shape&   aNewShape,
                                       const TopoDS_Shape&   aNewSubShape,
                                       const TopoDS_Shape&   aGenS,
                                       const TopoDS_Shape&   aSubGenS,
                                       const Sweep_NumShape& aDirS) const override;

  //! Returns true if aNewSubShape (addressed by
  //! aGenS and aSubDirS) must be added in aNewShape
  //! (addressed by aGenS and aDirS).
  Standard_EXPORT bool GDDShapeIsToAdd(const TopoDS_Shape&   aNewShape,
                                       const TopoDS_Shape&   aNewSubShape,
                                       const TopoDS_Shape&   aGenS,
                                       const Sweep_NumShape& aDirS,
                                       const Sweep_NumShape& aSubDirS) const override;

  //! In some particular cases the topology of a
  //! generated face must be composed of independent
  //! closed wires, in this case this function returns
  //! true. The only case in which the function may
  //! return true is a planar face in a closed revol.
  Standard_EXPORT bool SeparatedWires(const TopoDS_Shape&   aNewShape,
                                      const TopoDS_Shape&   aNewSubShape,
                                      const TopoDS_Shape&   aGenS,
                                      const TopoDS_Shape&   aSubGenS,
                                      const Sweep_NumShape& aDirS) const override;

  //! In some particular cases the topology of a
  //! generated Shell must be composed of independent
  //! closed Shells, in this case this function returns
  //! a Compound of independent Shells.
  Standard_EXPORT TopoDS_Shape SplitShell(const TopoDS_Shape& aNewShape) const override;

  //! Returns true if aDirS and aGenS addresses a
  //! resulting Shape. In some specific cases the shape
  //! can be geometrically inexsistant, then this
  //! function returns false.
  Standard_EXPORT bool HasShape(const TopoDS_Shape&   aGenS,
                                const Sweep_NumShape& aDirS) const override;

  //! Returns true when the geometry of aGenS is not
  //! modified by the rotation.
  Standard_EXPORT bool IsInvariant(const TopoDS_Shape& aGenS) const override;

  //! returns the axis
  Standard_EXPORT gp_Ax1 Axe() const;

  //! returns the angle.
  Standard_EXPORT double Angle() const;

private:
  double myAng;
  gp_Ax1 myAxe;
};

#endif // _BRepSweep_Rotation_HeaderFile