// Created on: 1997-05-14
// Created by: Christian CAILLET
// Copyright (c) 1997-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#ifndef _XSControl_Reader_HeaderFile
#define _XSControl_Reader_HeaderFile

#include "DE_ShapeFixParameters.hxx"
#include "ShapeProcess.hxx"
#include "Standard.hxx"
#include "Standard_DefineAlloc.hxx"
#include "Standard_Handle.hxx"
#include "Standard_Transient.hxx"
#include "NCollection_Sequence.hxx"
#include "TopoDS_Shape.hxx"
#include "Standard_CString.hxx"
#include "IFSelect_ReturnStatus.hxx"
#include "NCollection_HSequence.hxx"
#include "Standard_Integer.hxx"
#include "IFSelect_PrintCount.hxx"
#include "Message_ProgressRange.hxx"
#include "XSAlgo_ShapeProcessor.hxx"

class XSControl_WorkSession;
class Interface_InterfaceModel;
class Standard_Transient;
class Transfer_ActorOfTransientProcess;
class TopoDS_Shape;

//! A groundwork to convert a shape to data which complies
//! with a particular norm. This data can be that of a whole
//! model or that of a specific list of entities in the model.
//! You specify the list using a single selection or a
//! combination of selections. A selection is an operator which
//! computes a list of entities from a list given in input. To
//! specify the input, you can use:
//! - A predefined selection such as "xst-transferrable-roots"
//! - A filter based on a signature.
//! A signature is an operator which returns a string from an
//! entity according to its type.
//! For example:
//! - "xst-type" (CDL)
//! - "iges-level"
//! - "step-type".
//! A filter can be based on a signature by giving a value to
//! be matched by the string returned. For example,
//! "xst-type(Curve)".
//! If no list is specified, the selection computes its list of
//! entities from the whole model. To use this class, you have to
//! initialize the transfer norm first, as shown in the example below.
//! Example:
//! Control_Reader reader;
//! IFSelect_ReturnStatus status = reader.ReadFile (filename.);
//! When using IGESControl_Reader or STEPControl_Reader - as the
//! above example shows - the reader initializes the norm directly.
//! Note that loading the file only stores the data. It does
//! not translate this data. Shapes are accumulated by
//! successive transfers. The last shape is cleared by:
//! - ClearShapes which allows you to handle a new batch
//! - TransferRoots which restarts the list of shapes from scratch.
class XSControl_Reader
{
public:
  DEFINE_STANDARD_ALLOC

  //! Creates a Reader from scratch (creates an empty WorkSession)
  //! A WorkSession or a Controller must be provided before running
  Standard_EXPORT XSControl_Reader();

  //! Creates a Reader from scratch, with a norm name which
  //! identifies a Controller
  Standard_EXPORT XSControl_Reader(const char* const norm);

  //! Creates a Reader from an already existing Session, with a
  //! Controller already set
  //! Virtual destructor
  Standard_EXPORT XSControl_Reader(const occ::handle<XSControl_WorkSession>& WS,
                                   const bool                                scratch = true);

  //! Empty virtual destructor
  virtual ~XSControl_Reader() = default;

  //! Sets a specific norm to <me>
  //! Returns True if done, False if <norm> is not available
  Standard_EXPORT bool SetNorm(const char* const norm);

  //! Sets a specific session to <me>
  Standard_EXPORT void SetWS(const occ::handle<XSControl_WorkSession>& WS,
                             const bool                                scratch = true);

  //! Returns the session used in <me>
  Standard_EXPORT occ::handle<XSControl_WorkSession> WS() const;

  //! Loads a file and returns the read status
  //! Zero for a Model which complies with the Controller
  Standard_EXPORT virtual IFSelect_ReturnStatus ReadFile(const char* const filename);

  //! Loads a file from stream and returns the read status
  Standard_EXPORT virtual IFSelect_ReturnStatus ReadStream(const char* const theName,
                                                           std::istream&     theIStream);

  //! Returns the model. It can then be consulted (header, product)
  Standard_EXPORT occ::handle<Interface_InterfaceModel> Model() const;

  //! Returns a list of entities from the IGES or STEP file
  //! according to the following rules:
  //! - if first and second are empty strings, the whole file is selected.
  //! - if first is an entity number or label, the entity referred to is selected.
  //! - if first is a list of entity numbers/labels separated by commas, the entities referred to
  //! are selected,
  //! - if first is the name of a selection in the worksession and second is not defined,
  //! the list contains the standard output for that selection.
  //! - if first is the name of a selection and second is defined, the criterion defined
  //! by second is applied to the result of the first selection.
  //! A selection is an operator which computes a list of entities from a list given in
  //! input according to its type. If no list is specified, the selection computes its
  //! list of entities from the whole model.
  //! A selection can be:
  //! - A predefined selection (xst-transferrable-mode)
  //! - A filter based on a signature
  //! A Signature is an operator which returns a string from an entity according to its type. For
  //! example:
  //! - "xst-type" (CDL)
  //! - "iges-level"
  //! - "step-type".
  //! For example, if you wanted to select only the advanced_faces in a STEP file you
  //! would use the following code:
  //! Example
  //! Reader.GiveList("xst-transferrable-roots","step-type(ADVANCED_FACE)");
  //! Warning
  //! If the value given to second is incorrect, it will simply be ignored.
  Standard_EXPORT occ::handle<NCollection_HSequence<occ::handle<Standard_Transient>>> GiveList(
    const char* const first  = "",
    const char* const second = "");

  //! Computes a List of entities from the model as follows
  //! <first> being a Selection, <ent> being an entity or a list
  //! of entities (as a HSequenceOfTransient) :
  //! the standard result of this selection applied to this list
  //! if <first> is erroneous, a null handle is returned
  Standard_EXPORT occ::handle<NCollection_HSequence<occ::handle<Standard_Transient>>> GiveList(
    const char* const                      first,
    const occ::handle<Standard_Transient>& ent);

  //! Determines the list of root entities which are candidate for
  //! a transfer to a Shape, and returns the number
  //! of entities in the list
  Standard_EXPORT virtual int NbRootsForTransfer();

  //! Returns an IGES or STEP root
  //! entity for translation. The entity is identified by its
  //! rank in a list.
  Standard_EXPORT occ::handle<Standard_Transient> RootForTransfer(const int num = 1);

  //! Translates a root identified by the rank num in the model.
  //! false is returned if no shape is produced.
  Standard_EXPORT bool TransferOneRoot(
    const int                    num         = 1,
    const Message_ProgressRange& theProgress = Message_ProgressRange());

  //! Translates an IGES or STEP
  //! entity identified by the rank num in the model.
  //! false is returned if no shape is produced.
  Standard_EXPORT bool TransferOne(
    const int                    num,
    const Message_ProgressRange& theProgress = Message_ProgressRange());

  //! Translates an IGES or STEP
  //! entity in the model. true is returned if a shape is
  //! produced; otherwise, false is returned.
  Standard_EXPORT bool TransferEntity(
    const occ::handle<Standard_Transient>& start,
    const Message_ProgressRange&           theProgress = Message_ProgressRange());

  //! Translates a list of entities.
  //! Returns the number of IGES or STEP entities that were
  //! successfully translated. The list can be produced with GiveList.
  //! Warning - This function does not clear the existing output shapes.
  Standard_EXPORT int TransferList(
    const occ::handle<NCollection_HSequence<occ::handle<Standard_Transient>>>& list,
    const Message_ProgressRange& theProgress = Message_ProgressRange());

  //! Translates all translatable
  //! roots and returns the number of successful translations.
  //! Warning - This function clears existing output shapes first.
  Standard_EXPORT int TransferRoots(
    const Message_ProgressRange& theProgress = Message_ProgressRange());

  //! Clears the list of shapes that
  //! may have accumulated in calls to TransferOne or TransferRoot.C
  Standard_EXPORT void ClearShapes();

  //! Returns the number of shapes produced by translation.
  Standard_EXPORT int NbShapes() const;

  //! Returns the shape resulting
  //! from a translation and identified by the rank num.
  //! num equals 1 by default. In other words, the first shape
  //! resulting from the translation is returned.
  Standard_EXPORT TopoDS_Shape Shape(const int num = 1) const;

  //! Returns all of the results in
  //! a single shape which is:
  //! - a null shape if there are no results,
  //! - a shape if there is one result,
  //! - a compound containing the resulting shapes if there are more than one.
  Standard_EXPORT TopoDS_Shape OneShape() const;

  //! Prints the check list attached to loaded data, on the Standard
  //! Trace File (starts at std::cout)
  //! All messages or fails only, according to <failsonly>
  //! mode = 0 : per entity, prints messages
  //! mode = 1 : per message, just gives count of entities per check
  //! mode = 2 : also gives entity numbers
  Standard_EXPORT void PrintCheckLoad(const bool failsonly, const IFSelect_PrintCount mode) const;

  //! Prints the check list attached to loaded data.
  Standard_EXPORT void PrintCheckLoad(Standard_OStream&         theStream,
                                      const bool                failsonly,
                                      const IFSelect_PrintCount mode) const;

  //! Displays check results for the
  //! last translation of IGES or STEP entities to Open CASCADE
  //! entities. Only fail messages are displayed if failsonly is
  //! true. All messages are displayed if failsonly is
  //! false. mode determines the contents and the order of the
  //! messages according to the terms of the IFSelect_PrintCount enumeration.
  Standard_EXPORT void PrintCheckTransfer(const bool                failsonly,
                                          const IFSelect_PrintCount mode) const;

  //! Displays check results for the last translation of IGES or STEP entities to Open CASCADE
  //! entities.
  Standard_EXPORT void PrintCheckTransfer(Standard_OStream&         theStream,
                                          const bool                failsonly,
                                          const IFSelect_PrintCount mode) const;

  //! Displays the statistics for
  //! the last translation. what defines the kind of
  //! statistics that are displayed as follows:
  //! - 0 gives general statistics (number of translated roots,
  //! number of warnings, number of fail messages),
  //! - 1 gives root results,
  //! - 2 gives statistics for all checked entities,
  //! - 3 gives the list of translated entities,
  //! - 4 gives warning and fail messages,
  //! - 5 gives fail messages only.
  //! The use of mode depends on the value of what. If what is 0,
  //! mode is ignored. If what is 1, 2 or 3, mode defines the following:
  //! - 0 lists the numbers of IGES or STEP entities in the respective model
  //! - 1 gives the number, identifier, type and result
  //! type for each IGES or STEP entity and/or its status
  //! (fail, warning, etc.)
  //! - 2 gives maximum information for each IGES or STEP entity (i.e. checks)
  //! - 3 gives the number of entities per type of IGES or STEP entity
  //! - 4 gives the number of IGES or STEP entities per result type and/or status
  //! - 5 gives the number of pairs (IGES or STEP or result type and status)
  //! - 6 gives the number of pairs (IGES or STEP or result type
  //! and status) AND the list of entity numbers in the IGES or STEP model.
  //! If what is 4 or 5, mode defines the warning and fail
  //! messages as follows:
  //! - if mode is 0 all warnings and checks per entity are returned
  //! - if mode is 2 the list of entities per warning is returned.
  //! If mode is not set, only the list of all entities per warning is given.
  Standard_EXPORT void PrintStatsTransfer(const int what, const int mode = 0) const;

  //! Displays the statistics for the last translation.
  Standard_EXPORT void PrintStatsTransfer(Standard_OStream& theStream,
                                          const int         what,
                                          const int         mode = 0) const;

  //! Gives statistics about Transfer
  Standard_EXPORT void GetStatsTransfer(
    const occ::handle<NCollection_HSequence<occ::handle<Standard_Transient>>>& list,
    int&                                                                       nbMapped,
    int&                                                                       nbWithResult,
    int&                                                                       nbWithFail) const;

  //! Sets parameters for shape processing.
  //! @param theParameters the parameters for shape processing.
  Standard_EXPORT void SetShapeFixParameters(
    const XSAlgo_ShapeProcessor::ParameterMap& theParameters);

  //! Sets parameters for shape processing.
  //! Parameters are moved from the input map.
  //! @param theParameters the parameters for shape processing.
  Standard_EXPORT void SetShapeFixParameters(XSAlgo_ShapeProcessor::ParameterMap&& theParameters);

  //! Sets parameters for shape processing.
  //! Parameters from @p theParameters are copied to the internal map.
  //! Parameters from @p theAdditionalParameters are copied to the internal map
  //! if they are not present in @p theParameters.
  //! @param theParameters the parameters for shape processing.
  //! @param theAdditionalParameters the additional parameters for shape processing.
  Standard_EXPORT void SetShapeFixParameters(
    const DE_ShapeFixParameters&               theParameters,
    const XSAlgo_ShapeProcessor::ParameterMap& theAdditionalParameters = {});

  //! Returns parameters for shape processing that was set by SetParameters() method.
  //! @return the parameters for shape processing. Empty map if no parameters were set.
  Standard_EXPORT const XSAlgo_ShapeProcessor::ParameterMap& GetShapeFixParameters() const;

  //! Sets flags defining operations to be performed on shapes.
  //! @param theFlags The flags defining operations to be performed on shapes.
  Standard_EXPORT void SetShapeProcessFlags(const ShapeProcess::OperationsFlags& theFlags);

  //! Returns flags defining operations to be performed on shapes.
  //! @return Pair of values defining operations to be performed on shapes and a boolean value
  //!         that indicates whether the flags were set.
  Standard_EXPORT const XSAlgo_ShapeProcessor::ProcessingFlags& GetShapeProcessFlags() const;

protected:
  //! Returns a sequence of produced shapes
  Standard_EXPORT NCollection_Sequence<TopoDS_Shape>& Shapes();

  //! Returns default parameters for shape fixing.
  //! This method should be implemented in the derived classes to return default parameters for
  //! shape fixing.
  //! @return Default parameters for shape fixing.
  virtual DE_ShapeFixParameters GetDefaultShapeFixParameters() const
  {
    return DE_ShapeFixParameters();
  }

  //! Returns default flags for shape processing.
  //! This method should be implemented in the derived classes to return default flags for shape
  //! processing.
  //! @return Default flags for shape processing.
  virtual ShapeProcess::OperationsFlags GetDefaultShapeProcessFlags() const
  {
    return ShapeProcess::OperationsFlags();
  }

private:
  //! Returns the Actor for the Transfer of an Entity.
  //! This Actor is used by the Reader to perform the Transfer.
  //! @return the Actor for the Transfer of an Entity. May be nullptr.
  occ::handle<Transfer_ActorOfTransientProcess> GetActor() const;

  //! If parameters haven't yet been provided, initializes them with default values
  //! provided by GetDefaultShapeFixParameters() method.
  void InitializeMissingParameters();

protected:
  bool                                                  therootsta;
  NCollection_Sequence<occ::handle<Standard_Transient>> theroots;

private:
  occ::handle<XSControl_WorkSession> thesession;
  NCollection_Sequence<TopoDS_Shape> theshapes;
};

#endif // _XSControl_Reader_HeaderFile