// Created on: 1996-02-13
// Created by: Jacques GOUSSARD
// Copyright (c) 1996-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#ifndef _BRepFeat_Form_HeaderFile
#define _BRepFeat_Form_HeaderFile

#include "Standard.hxx"
#include "Standard_DefineAlloc.hxx"
#include "Standard_Handle.hxx"

#include "TopoDS_Shape.hxx"
#include "NCollection_List.hxx"
#include "TopTools_ShapeMapHasher.hxx"
#include "NCollection_DataMap.hxx"
#include "BRepFeat_PerfSelection.hxx"
#include "TopoDS_Face.hxx"
#include "BRepFeat_StatusError.hxx"
#include "BRepBuilderAPI_MakeShape.hxx"
#include "Geom_Curve.hxx"
#include "NCollection_Sequence.hxx"
#include "Standard_Integer.hxx"
class Geom_Curve;
class LocOpe_Gluer;
class BRepAlgoAPI_BooleanOperation;

//! Provides general functions to build form features.
//! Form features can be depressions or protrusions and include the following types:
//! -          Cylinder
//! -          Draft Prism
//! -          Prism
//! -          Revolved feature
//! -          Pipe
//! In each case, you have a choice of operation type between the following:
//! -          removing matter (a Boolean cut: Fuse setting 0)
//! -          adding matter (Boolean fusion: Fuse setting 1)
//! The semantics of form feature creation is based on the construction of shapes:
//! -      along a length
//! -      up to a limiting face
//! -      from a limiting face to a height
//! -      above and/or below a plane
//! The shape defining construction of the feature can be either the
//! supporting edge or the concerned area of a face.
//! In case of the supporting edge, this contour can be attached to a
//! face of the basis shape by binding. When the contour is bound to this
//! face, the information that the contour will slide on the face
//! becomes available to the relevant class methods. In case of the
//! concerned area of a face, you could, for example, cut it out and
//! move it to a different height which will define the limiting face of a
//! protrusion or depression.
//! Topological definition with local operations of this sort makes
//! calculations simpler and faster than a global operation. The latter
//! would entail a second phase of removing unwanted matter to get the same result.
class BRepFeat_Form : public BRepBuilderAPI_MakeShape
{
public:
  DEFINE_STANDARD_ALLOC

  //! returns the list of generated Faces.
  Standard_EXPORT const NCollection_List<TopoDS_Shape>& Modified(const TopoDS_Shape& F) override;

  //! returns a list of the created faces
  //! from the shape <S>.
  Standard_EXPORT const NCollection_List<TopoDS_Shape>& Generated(const TopoDS_Shape& S) override;

  Standard_EXPORT bool IsDeleted(const TopoDS_Shape& S) override;

  //! Returns the list of shapes created at the bottom of
  //! the created form. It may be an empty list.
  Standard_EXPORT const NCollection_List<TopoDS_Shape>& FirstShape() const;

  //! Returns the list of shapes created at the top of the
  //! created form. It may be an empty list.
  Standard_EXPORT const NCollection_List<TopoDS_Shape>& LastShape() const;

  //! Returns a list of the limiting and glueing edges
  //! generated by the feature. These edges did not originally
  //! exist in the basis shape.
  //! The list provides the information necessary for
  //! subsequent addition of fillets. It may be an empty list.
  Standard_EXPORT const NCollection_List<TopoDS_Shape>& NewEdges() const;

  //! Returns a list of the tangent edges among the limiting
  //! and glueing edges generated by the feature. These
  //! edges did not originally exist in the basis shape and are
  //! tangent to the face against which the feature is built.
  //! The list provides the information necessary for
  //! subsequent addition of fillets. It may be an empty list.
  //! If an edge is tangent, no fillet is possible, and the edge
  //! must subsequently be removed if you want to add a fillet.
  Standard_EXPORT const NCollection_List<TopoDS_Shape>& TgtEdges() const;

  //! Initializes the topological construction if the basis shape is present.
  void BasisShapeValid();

  //! Initializes the topological construction if the generated shape S is present.
  void GeneratedShapeValid();

  //! Initializes the topological construction if the shape is
  //! present from the specified integer on.
  void ShapeFromValid();

  //! Initializes the topological construction if the shape is
  //! present until the specified integer.
  void ShapeUntilValid();

  //! Initializes the topological construction if the glued face is present.
  void GluedFacesValid();

  //! Initializes the topological construction if the sketch face
  //! is present. If the sketch face is inside the basis shape,
  //! local operations such as glueing can be performed.
  void SketchFaceValid();

  //! Initializes the topological construction if the selected face is present.
  void PerfSelectionValid();

  Standard_EXPORT virtual void Curves(NCollection_Sequence<occ::handle<Geom_Curve>>& S) = 0;

  Standard_EXPORT virtual occ::handle<Geom_Curve> BarycCurve() = 0;

  Standard_EXPORT BRepFeat_StatusError CurrentStatusError() const;

protected:
  //! Redefines the empty constructor.
  BRepFeat_Form();

  //! General perform method...
  Standard_EXPORT void GlobalPerform();

  Standard_EXPORT void UpdateDescendants(const LocOpe_Gluer& G);

  Standard_EXPORT void UpdateDescendants(const BRepAlgoAPI_BooleanOperation& aBOP,
                                         const TopoDS_Shape&                 SResult,
                                         const bool                          SkipFace = false);

  Standard_EXPORT bool TransformShapeFU(const int flag);

  bool myFuse;
  bool myModify;
  NCollection_DataMap<TopoDS_Shape, NCollection_List<TopoDS_Shape>, TopTools_ShapeMapHasher> myMap;
  TopoDS_Shape                                                             myFShape;
  TopoDS_Shape                                                             myLShape;
  NCollection_List<TopoDS_Shape>                                           myNewEdges;
  NCollection_List<TopoDS_Shape>                                           myTgtEdges;
  BRepFeat_PerfSelection                                                   myPerfSelection;
  bool                                                                     myJustGluer;
  bool                                                                     myJustFeat;
  TopoDS_Shape                                                             mySbase;
  TopoDS_Face                                                              mySkface;
  TopoDS_Shape                                                             myGShape;
  TopoDS_Shape                                                             mySFrom;
  TopoDS_Shape                                                             mySUntil;
  NCollection_DataMap<TopoDS_Shape, TopoDS_Shape, TopTools_ShapeMapHasher> myGluedF;

private:
  bool                 mySbOK;
  bool                 mySkOK;
  bool                 myGSOK;
  bool                 mySFOK;
  bool                 mySUOK;
  bool                 myGFOK;
  bool                 myPSOK;
  BRepFeat_StatusError myStatusError;
};

#include "BRepFeat_Form.lxx"

#endif // _BRepFeat_Form_HeaderFile