// Created on: 1991-07-23
// Created by: Christophe MARION
// Copyright (c) 1991-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#ifndef _BRepPrim_OneAxis_HeaderFile
#define _BRepPrim_OneAxis_HeaderFile

#include "Standard.hxx"
#include "Standard_DefineAlloc.hxx"

#include "BRepPrim_Builder.hxx"
#include "gp_Ax2.hxx"
#include "TopoDS_Shell.hxx"
#include "TopoDS_Vertex.hxx"
#include "TopoDS_Edge.hxx"
#include "TopoDS_Wire.hxx"
#include "TopoDS_Face.hxx"
class gp_Pnt2d;

//! Algorithm to build primitives with one axis of
//! revolution.
//!
//! The revolution body is described by:
//!
//! A coordinate system (Ax2 from gp). The Z axis is
//! the rotational axis.
//!
//! An Angle around the Axis, When the Angle is 2*PI
//! the primitive is not limited by planar faces. The
//! U parameter range from 0 to Angle.
//!
//! A parameter range VMin, VMax on the meridian.
//!
//! A meridian: The meridian is a curve described by
//! a set of deferred methods.
//!
//! The topology consists of A shell, Faces, Wires,
//! Edges and Vertices. Methods are provided to build
//! all the elements. Building an element implies the
//! automatic building of all its sub-elements.
//!
//! So building the shell builds everything.
//!
//! There are at most 5 faces:
//!
//! - The LateralFace.
//! - The TopFace and the BottomFace.
//! - The StartFace and the EndFace.
class BRepPrim_OneAxis
{
public:
  DEFINE_STANDARD_ALLOC

  //! The MeridianOffset is added to the parameters on
  //! the meridian curve and to the V values of the
  //! pcurves. This is used for the sphere for example,
  //! to give a range on the meridian edge which is not
  //! VMin, VMax.
  Standard_EXPORT void SetMeridianOffset(const double MeridianOffset = 0);

  //! Returns the Ax2 from <me>.
  Standard_EXPORT const gp_Ax2& Axes() const;

  Standard_EXPORT void Axes(const gp_Ax2& A);

  Standard_EXPORT double Angle() const;

  Standard_EXPORT void Angle(const double A);

  Standard_EXPORT double VMin() const;

  Standard_EXPORT void VMin(const double V);

  Standard_EXPORT double VMax() const;

  Standard_EXPORT void VMax(const double V);

  //! Returns a face with no edges. The surface is the
  //! lateral surface with normals pointing outward. The
  //! U parameter is the angle with the origin on the X
  //! axis. The V parameter is the parameter of the
  //! meridian.
  Standard_EXPORT virtual TopoDS_Face MakeEmptyLateralFace() const = 0;

  //! Returns an edge with a 3D curve made from the
  //! meridian in the XZ plane rotated by <Ang> around
  //! the Z-axis. Ang may be 0 or myAngle.
  Standard_EXPORT virtual TopoDS_Edge MakeEmptyMeridianEdge(const double Ang) const = 0;

  //! Sets the parametric curve of the edge <E> in the
  //! face <F> to be the 2d representation of the
  //! meridian.
  Standard_EXPORT virtual void SetMeridianPCurve(TopoDS_Edge& E, const TopoDS_Face& F) const = 0;

  //! Returns the meridian point at parameter <V> in the
  //! plane XZ.
  Standard_EXPORT virtual gp_Pnt2d MeridianValue(const double V) const = 0;

  //! Returns True if the point of parameter <V> on the
  //! meridian is on the Axis. Default implementation is
  //! std::abs(MeridianValue(V).X()) < Precision::Confusion()
  Standard_EXPORT virtual bool MeridianOnAxis(const double V) const;

  //! Returns True if the meridian is closed.
  //! Default implementation is:
  //! MeridianValue(VMin).IsEqual(MeridianValue(VMax),
  //! Precision::Confusion())
  Standard_EXPORT virtual bool MeridianClosed() const;

  //! Returns True if VMax is infinite.
  //! Default Precision::IsPositiveInfinite(VMax);
  Standard_EXPORT virtual bool VMaxInfinite() const;

  //! Returns True if VMin is infinite.
  //! Default Precision::IsNegativeInfinite(VMax);
  Standard_EXPORT virtual bool VMinInfinite() const;

  //! Returns True if there is a top face.
  //!
  //! That is neither: VMaxInfinite()
  //! MeridianClosed()
  //! MeridianOnAxis(VMax)
  Standard_EXPORT virtual bool HasTop() const;

  //! Returns True if there is a bottom face.
  //!
  //! That is neither: VMinInfinite()
  //! MeridianClosed()
  //! MeridianOnAxis(VMin)
  Standard_EXPORT virtual bool HasBottom() const;

  //! Returns True if there are Start and End faces.
  //!
  //! That is: 2*PI - Angle > Precision::Angular()
  Standard_EXPORT virtual bool HasSides() const;

  //! Returns the Shell containing all the Faces of the
  //! primitive.
  Standard_EXPORT const TopoDS_Shell& Shell();

  //! Returns the lateral Face. It is oriented toward
  //! the outside of the primitive.
  Standard_EXPORT const TopoDS_Face& LateralFace();

  //! Returns the top planar Face. It is Oriented
  //! toward the +Z axis (outside).
  Standard_EXPORT const TopoDS_Face& TopFace();

  //! Returns the Bottom planar Face. It is Oriented
  //! toward the -Z axis (outside).
  Standard_EXPORT const TopoDS_Face& BottomFace();

  //! Returns the Face starting the slice, it is
  //! oriented toward the exterior of the primitive.
  Standard_EXPORT const TopoDS_Face& StartFace();

  //! Returns the Face ending the slice, it is oriented
  //! toward the exterior of the primitive.
  Standard_EXPORT const TopoDS_Face& EndFace();

  //! Returns the wire in the lateral face.
  Standard_EXPORT const TopoDS_Wire& LateralWire();

  //! Returns the wire in the lateral face with the
  //! start edge.
  Standard_EXPORT const TopoDS_Wire& LateralStartWire();

  //! Returns the wire with in lateral face with the end
  //! edge.
  Standard_EXPORT const TopoDS_Wire& LateralEndWire();

  //! Returns the wire in the top face.
  Standard_EXPORT const TopoDS_Wire& TopWire();

  //! Returns the wire in the bottom face.
  Standard_EXPORT const TopoDS_Wire& BottomWire();

  //! Returns the wire in the start face.
  Standard_EXPORT const TopoDS_Wire& StartWire();

  //! Returns the wire in the start face with the
  //! AxisEdge.
  Standard_EXPORT const TopoDS_Wire& AxisStartWire();

  //! Returns the Wire in the end face.
  Standard_EXPORT const TopoDS_Wire& EndWire();

  //! Returns the Wire in the end face with the
  //! AxisEdge.
  Standard_EXPORT const TopoDS_Wire& AxisEndWire();

  //! Returns the Edge built along the Axis and oriented
  //! on +Z of the Axis.
  Standard_EXPORT const TopoDS_Edge& AxisEdge();

  //! Returns the Edge at angle 0.
  Standard_EXPORT const TopoDS_Edge& StartEdge();

  //! Returns the Edge at angle Angle. If !HasSides()
  //! the StartEdge and the EndEdge are the same edge.
  Standard_EXPORT const TopoDS_Edge& EndEdge();

  //! Returns the linear Edge between start Face and top
  //! Face.
  Standard_EXPORT const TopoDS_Edge& StartTopEdge();

  //! Returns the linear Edge between start Face and
  //! bottom Face.
  Standard_EXPORT const TopoDS_Edge& StartBottomEdge();

  //! Returns the linear Edge between end Face and top
  //! Face.
  Standard_EXPORT const TopoDS_Edge& EndTopEdge();

  //! Returns the linear Edge between end Face and
  //! bottom Face.
  Standard_EXPORT const TopoDS_Edge& EndBottomEdge();

  //! Returns the edge at VMax. If MeridianClosed() the
  //! TopEdge and the BottomEdge are the same edge.
  Standard_EXPORT const TopoDS_Edge& TopEdge();

  //! Returns the edge at VMin. If MeridianClosed() the
  //! TopEdge and the BottomEdge are the same edge.
  Standard_EXPORT const TopoDS_Edge& BottomEdge();

  //! Returns the Vertex at the Top altitude on the axis.
  Standard_EXPORT const TopoDS_Vertex& AxisTopVertex();

  //! Returns the Vertex at the Bottom altitude on the
  //! axis.
  Standard_EXPORT const TopoDS_Vertex& AxisBottomVertex();

  //! Returns the vertex (0,VMax)
  Standard_EXPORT const TopoDS_Vertex& TopStartVertex();

  //! Returns the vertex (angle,VMax)
  Standard_EXPORT const TopoDS_Vertex& TopEndVertex();

  //! Returns the vertex (0,VMin)
  Standard_EXPORT const TopoDS_Vertex& BottomStartVertex();

  //! Returns the vertex (angle,VMax)
  Standard_EXPORT const TopoDS_Vertex& BottomEndVertex();
  Standard_EXPORT virtual ~BRepPrim_OneAxis();

protected:
  //! Creates a OneAxis algorithm. <B> is used to build
  //! the Topology. The angle defaults to 2*PI.
  Standard_EXPORT BRepPrim_OneAxis(const BRepPrim_Builder& B,
                                   const gp_Ax2&           A,
                                   const double            VMin,
                                   const double            VMax);

  BRepPrim_Builder myBuilder;

private:
  //! Returns true if the geometric height ordering is inverted,
  //! i.e., MeridianValue(VMax).Y() < MeridianValue(VMin).Y().
  //! When true, VMin corresponds to geometric top and VMax to geometric bottom.
  //! This can occur with torus when V range like (90deg, 270deg) is used.
  bool isHeightInverted() const;

  //! Returns true if the heights at VMin and VMax are equal (within tolerance).
  //! This indicates the AxisEdge would be degenerate (zero length).
  bool areHeightsEqual() const;

  gp_Ax2        myAxes;
  double        myAngle;
  double        myVMin;
  double        myVMax;
  double        myMeridianOffset;
  TopoDS_Shell  myShell;
  bool          ShellBuilt;
  TopoDS_Vertex myVertices[6];
  bool          VerticesBuilt[6];
  TopoDS_Edge   myEdges[9];
  bool          EdgesBuilt[9];
  TopoDS_Wire   myWires[9];
  bool          WiresBuilt[9];
  TopoDS_Face   myFaces[5];
  bool          FacesBuilt[5];
};

#endif // _BRepPrim_OneAxis_HeaderFile